Deformation of the Upper and Lower Surfaces of an Airfoil by Macro Fiber Composite Actuators

In this follow-on study, macro fiber composite actuators were used to change the shape of the upper and lower surfaces of an airfoil model with geometry close to that of a NACA 0014. In the design discussed, these thin and light piezoelectric actuators are bonded to the inside and become an integral part of the skin of the upper and lower surfaces of the airfoil. Still-air and wind-tunnel measurements in different flow regimes were performed to assess the characteristics of the static changes of the shape of the airfoil. The results obtained can be used to design a wing with morphing surfaces for improving its aerodynamics, for maneuvering without ailerons, and/or for active control of the flow over the wing.

[1]  Anthony S. Pototzky,et al.  Actively Controlling Buffet-Induced Excitations , 2005 .

[2]  M. Friswell,et al.  Implementation of a Continuous-Inextensible-Surface Piezocomposite Airfoil , 2012 .

[3]  L. Jennifer,et al.  A Feasibility Study To Control Airfoil Shape Using THUNDER , 1997 .

[4]  Michael J. Siclari,et al.  The design of transonic airfoil sections for an adaptive wing concept using a stochastic optimization method , 1996 .

[5]  Rakesh K. Kapania,et al.  Computation of Actuation Power Requirements for Smart Wings with Morphing Airfoils , 2002 .

[6]  Afzal Suleman,et al.  Design of a Morphing Airfoil Using Aerodynamic Shape Optimization , 2006 .

[7]  Daniel J. Inman,et al.  Morphing wing micro-air-vehicles via macro-fiber-composite actuators , 2007 .

[8]  Afzal Suleman,et al.  On Active Aeroelastic Control of an Adaptive Wing Using Piezoelectric Actuators , 2005 .

[9]  Marco Debiasi,et al.  Deformation of the Upper Surface of an Airfoil by Macro Fiber Composite Actuators , 2012 .

[10]  Jamey Jacob,et al.  Active Control of Separation on a Wing with Oscillating Camber , 2002 .

[11]  Jamey Jacob,et al.  ACTIVE FLOW CONTROL OF SEPARATION ON A WING WITH OSCILLATORY CAMBER , 2002 .

[12]  Kurt Maute,et al.  Integrated Multidisciplinary Topology Optimization Approach to Adaptive Wing Design , 2006 .

[13]  D. Munday,et al.  AIAA 2001 – 2837 Experimental and Numerical Investigation of Aerodynamic Flow Control Using Oscillating Adaptive Surfaces , 2022 .

[14]  Gregory W. Reich,et al.  Large-Area Aerodynamic Control for High-Altitude Long- Endurance Sensor Platforms , 2005 .

[15]  Marco Debiasi,et al.  Shape Change of the Upper Surface of an Airfoil by Macro Fiber Composite Actuators , 2011 .

[16]  Fernando Martini Catalano,et al.  Drag optimization for transport aircraft Mission Adaptive Wing , 2003 .

[17]  Daniel J. Inman,et al.  Novel, Bidirectional, Variable-Camber Airfoil via Macro-Fiber Composite Actuators , 2010 .

[18]  D. Munday,et al.  Experimental and Numerical Investigation ofAerodynamic Flow Control Using Oscillating Adaptive Surfaces , 2002 .

[19]  Stephen R Hallett,et al.  AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Denver , 2011 .

[20]  T. A. Weisshaar,et al.  Static aeroelastic control of an adaptive lifting surface , 1993 .

[21]  James E. Hubbard,et al.  Dynamic Shape Control of a Morphing Airfoil Using Spatially Distributed Transducers , 2006 .

[22]  Terrence A. Weisshaar,et al.  Induced Drag Reduction Using Aeroelastic Tailoring with Adaptive Control Surfaces , 2006 .

[23]  Onur Bilgen,et al.  Low Reynolds Number Behavior of a Solid-State Piezocomposite Variable-Camber Wing , 2013 .

[24]  Sridhar Kota,et al.  Static Shape Control of Smart Structures Using Compliant Mechanisms , 1999 .

[25]  Daniel J. Inman,et al.  A novel unmanned aircraft with solid-state control surfaces: Analysis and flight demonstration , 2013 .

[26]  Gareth J. Knowles,et al.  Static shape control for adaptive wings , 1994 .