Passive Alignment and Mounting of LiNbO$_3$ Waveguide Chips on Si Substrates by Low-Temperature Solid-State Bonding of Au

In this study, passive alignment and mounting of lithium niobate (LiNbO3) chips, with a large mismatch in the coefficient of thermal expansion with most semiconductors, are demonstrated for hybrid-integrated optical devices. LiNbO3 chips were aligned passively using the visual index alignment method and were subsequently bonded on the Si substrates by low-temperature solid-state bonding with Au microbumps, which allow for electrical connections and heat dissipation. Au-Au bonding was carried out at 100°C in ambient air after surface activation by argon RF plasma. The vertical bonding accuracy was determined by assessing the height variations of the Au microbumps due to the plastic deformation in the bonding process. The bonding accuracies in the horizontal and vertical directions were estimated to be within ±1 μm. Average excess loss due to misalignment between titanium-diffused single-mode LiNbO3 waveguides and V-groove-guided single-mode fibers was about 0.5-dBm per interface (wavelength: 1.55 μm).

[1]  Tetsuya Kawanishi,et al.  Low-Temperature Au-to-Au Bonding for LiNbO3/Si Structure Achieved in Ambient Air , 2007, IEICE Trans. Electron..

[2]  Tadatomo Suga,et al.  Optical Microsensors Integration Technologies for Biomedical Applications , 2009, IEICE Trans. Electron..

[3]  Yasuo Kitaoka,et al.  Miniaturized Blue Laser using Second Harmonic Generation , 2000 .

[4]  Tadatomo Suga,et al.  Room-Temperature Bonding of Vertical-Cavity Surface-Emitting Laser Chips on Si Substrates Using Au Microbumps in Ambient Air , 2008 .

[5]  T. Suga,et al.  Low-Temperature Bonding of Laser Diode Chips on Silicon Substrates Using Plasma Activation of Au Films , 2007, IEEE Photonics Technology Letters.

[6]  H. Hatakeyama,et al.  Multiple-chip precise self-aligned assembly for hybrid integrated optical modules using Au-Sn solder bumps , 2001 .

[7]  T. Itoh,et al.  Surface activated bonding for new flip chip and bumpless interconnect systems , 2002, 52nd Electronic Components and Technology Conference 2002. (Cat. No.02CH37345).

[8]  Toshikazu Hashimoto,et al.  Multichip optical hybrid integration technique with planar lightwave circuit platform , 1998 .

[9]  M Kagami,et al.  LiNbO(3) platforms for optical fiber alignment. , 1998, Optics letters.

[10]  T. Hashimoto,et al.  An application of a silica-on-terraced-silicon platform to hybrid Mach-Zehnder interferometric circuits consisting of silica-waveguides and LiNbO/sub 3/ phase-shifters , 1994, IEEE Photonics Technology Letters.

[11]  Toshikazu Hashimoto,et al.  Application of planar lightwave circuit platform to hybrid integrated optical WDM transmitter/receiver module , 1995 .

[12]  Yung-Cheng Lee,et al.  Thermosonic bonding of an optical transceiver based on an 8/spl times/8 vertical cavity surface emitting laser array , 1997 .

[13]  Ryutaro Maeda,et al.  Room-temperature wafer bonding of Si to LiNbO3, LiTaO3 and Gd3Ga5O12 by Ar-beam surface activation , 2001 .

[14]  Renshi Sawada,et al.  Highly accurate and quick bonding of a laser-diode chip onto a planar lightwave circuit , 2001 .

[15]  T. Suga,et al.  Room-temperature bonding of lithium niobate and silicon wafers by argon-beam surface activation , 1999 .

[16]  Renshi Sawada,et al.  Micro-encoder based on higher-order diffracted light interference , 2005 .

[17]  Tadatomo Suga,et al.  Room temperature bonding of silicon and lithium niobate , 2006 .

[18]  K. Vahala,et al.  Integration of Single‐Crystal LiNbO3 Thin Film on Silicon by Laser Irradiation and Ion Implantation– Induced Layer Transfer , 2006 .

[19]  N. Watanabe,et al.  Dynamic Strain and Chip Damage during Ultrasonic Flip Chip Bonding , 2001 .

[20]  Renshi Sawada,et al.  An integrated laser blood flowmeter , 2003 .

[21]  Gottfried Strasser,et al.  Hybrid integration of GaAs quantum cascade lasers with Si substrates by thermocompression bonding , 2008 .

[22]  Renshi Sawada,et al.  Hybrid microlaser encoder , 2003 .

[23]  Yoshihiro Tomita,et al.  Direct bonding of piezoelectric crystal onto silicon , 1995 .

[24]  K. Hohkawa,et al.  Fabrication of Si/LiNbO3 Structure by Using Film Bonding Process , 2001 .

[25]  S. Valette,et al.  Hybrid integration of semiconductor lasers with Si-based single-mode ridge waveguides , 1992 .