Solar hydrogen production by the Hybrid Sulfur process

Abstract A conceptual design and economic analysis are presented for a hydrogen production plant based on the use of thermochemical water splitting combined with a solar central receiver. The reference design consists of a Hybrid Sulfur thermochemical process coupled to a solar plant, based on the particle receiver concept, for a yearly average hydrogen production rate of 100 tons per day. The Hybrid Sulfur plant has been designed on the basis of results obtained from a new flowsheet ASPEN Plus ® simulation, carrying out specific evaluations for the Sulfur dioxide Depolarized Electrolyzer, being developed and constructed at Savannah River National Laboratory, and for the sulfuric acid decomposition bayonet-based reactor, investigated at Sandia National Laboratory. Solar hydrogen production costs have been estimated considering two different scenarios in the medium to long term period, assuming the financing and economic guidelines from DOE’s H2A model and performing ad hoc detailed evaluations for unconventional equipment. A minimum hydrogen production specific cost of 3.19 $/kg (2005 US $) has been assessed for the long term period. The costs, so obtained, are strongly affected by some quantities, parameters and assumptions, influence of which has also been investigated and discussed.

[1]  G. Cerri,et al.  Sulfur–Iodine plant for large scale hydrogen production by nuclear power , 2010 .

[2]  Yu. P. Kurochkin,et al.  Heat transfer between tubes of different sections and a stream of granular material , 1966, Journal of engineering physics.

[3]  K. R. Schultz,et al.  Initial Screening of Thermochemical Water-Splitting Cycles for High Efficiency Generation of Hydrogen Fuels Using Nuclear Power , 1999 .

[4]  H. Rollins,et al.  High-temperature sulfuric acid decomposition over complex metal oxide catalysts , 2009 .

[5]  Waichi Iwasaki,et al.  A consideration of the economic efficiency of hydrogen production from biomass , 2003 .

[6]  P. K. Falcone.  A handbook for solar central receiver design , 1986 .

[7]  C. J. Warde,et al.  The Westinghouse Sulfur Cycle for the thermochemical decomposition of water , 1977 .

[8]  Ernest W. Flick,et al.  WESTINGHOUSE ELECTRIC CORP. , 1993 .

[9]  D. Hobbs,et al.  Catalyst evaluation for a sulfur dioxide-depolarized electrolyzer , 2007 .

[10]  J. Funk.  Thermochemical hydrogen production: past and present , 2001 .

[11]  N. Siegel,et al.  Central-Station Solar Hydrogen Power Plant , 2007 .

[12]  M. Gorensek,et al.  Hybrid sulfur flowsheets using PEM electrolysis and a bayonet decomposition reactor , 2009 .

[13]  Hsuan-Tsung Hsieh,et al.  Computational Fluid Dynamics Modeling of Gas-Particle Flow Within a Solid-Particle Solar Receiver , 2007 .

[14]  J. E. Noring,et al.  Assessment of a solid particle receiver for a high temperature solar central receiver system , 1985 .

[15]  Don W. Green,et al.  Perry's Chemical Engineers' Handbook , 2007 .

[16]  Design of a composite sulfuric acid decomposition reactor, concentrator, and preheater for hydrogen generation processes , 2009 .

[17]  J. Ivy,et al.  Summary of Electrolytic Hydrogen Production , 2004 .

[18]  G. E. Beghi,et al.  A decade of research on thermochemical hydrogen at the Joint Research Centre, Ispra , 1986 .

[19]  Daniel M. Ginosar,et al.  Stability of supported platinum sulfuric acid decomposition catalysts for use in thermochemical water splitting cycles , 2007 .

[20]  Gregory J. Kolb,et al.  Heliostat Cost Reduction Study , 2007 .

[21]  Giovanni Cerri,et al.  HYTHEC: An EC funded search for a long term massive hydrogen production route using solar and nuclear technologies , 2007 .