Carbothermic reduction of anatase and rutile

[1]  B. Kim,et al.  Effect of Raw Material Characteristics on the Carbothermal Reduction of Titanium Dioxide , 2003 .

[2]  V. Berbenni,et al.  Effect of extended ball milling on graphite , 2003 .

[3]  Hongliang Lu,et al.  Characteristic of mechanically milled TiO2 powders , 2002 .

[4]  V. Berbenni,et al.  Increased chemisorption onto activated carbon after ball-milling , 2002 .

[5]  L. Berger.  Investigation of the carbothermal reduction of Ti2O3 in argon and nitrogen atmospheres , 2001 .

[6]  S. Bégin-Colin,et al.  Initial stages of the transformation of single-crystal anatase particles during high-energy ball milling , 2001 .

[7]  Zhenguo Yang,et al.  Polymorphic transformation and powder characteristics of TiO2 during high energy milling , 2000 .

[8]  A. Maître,et al.  Role of some technological parameters during carburizing titanium dioxide , 2000 .

[9]  N. Welham,et al.  Carbothermic reduction of llmenite (FeTiO3) and rutile (TiO2) , 1999 .

[10]  N. Welham.  Room temperature reduction of scheelite (CaWO_4) , 1999 .

[11]  S. Bégin-Colin,et al.  Kinetics of formation of nanocrystalline TiO2 II by high energy ball-milling of anatase TiO2 , 1999 .

[12]  N. Welham.  Mechanical activation of the solid-state reaction between Al and TiO2 , 1998 .

[13]  N. Welham,et al.  Mechanical enhancement of the dissolution of ilmenite , 1998 .

[14]  R. Koç,et al.  Carbothermal synthesis of titanium carbide using ultrafine titania powders , 1997 .

[15]  M. Bowden,et al.  Improved powder diffraction patterns for the titanium suboxides TinO2n−1 (4≤n≤9) , 1996, Powder Diffraction.

[16]  P. Millet,et al.  Preparation of TiB2 and ZrB2. influence of a mechano-chemical treatment on the borothermic reduction of titania and zirconia , 1996 .

[17]  K. Albertsen,et al.  Constitution and Thermodynamics of the System Ti-C , 1995 .

[18]  S. Bégin-Colin,et al.  Polymorphic transformations of titania induced by ball milling , 1994 .

[19]  N. Stevulova,et al.  Energy transfer and conversion during comminution and mechanical activation , 1993 .

[20]  M. Hawthorne,et al.  Synthesis of TiC via polymeric titanates: the preparation of fibres and thin films , 1992, Journal of Materials Science.

[21]  S. Warrington,et al.  Thermal analysis : techniques and applications , 1992 .

[22]  M. C. Nichols,et al.  Mineral Reference Manual , 1991 .

[23]  C. Koch.  Amorphization by mechanical alloying , 1990 .

[24]  M. Harmelin,et al.  Crystal-amorphous phase transition induced by ball-milling in silicon , 1990 .

[25]  A. Weeber,et al.  Amorphization by ball milling. A review , 1988 .

[26]  B. Hyde,et al.  Crystallographic shear in the higher titanium oxides: Structure, texture, mechanisms and thermodynamics , 1972 .

[27]  E. Storms.  The Refractory carbides , 1967 .

[28]  I. Kolthoff.  Treatise on analytical chemistry , 1959 .