Electrical capacitance tomography for gas–solids flow measurement for circulating fluidized beds

Abstract Gas–solids flows in the risers of circulating fluidised beds (CFBs) and cyclones exhibit complex physical behaviour, such as local backflow and recirculation. The difficulties in accurate measurement of gas–solids flows stem from various flow regimes, which exist in multi-phase flows in pipelines and vessels. It is necessary to investigate the solids’ fraction profile, flow regime identification, image reconstruction, flow acceleration and flow velocity. Electrical capacitance tomography (ECT) is regarded to be a successful technology for imaging industrial processes containing dielectric materials. ECT would help understanding of gas–particle interaction, particle–boundary interaction and the influence of gas on the solids’ flow turbulence. The first part of this paper covers some new developments in ECT, i.e., algorithms for 3D image presentation and on-line iterative image reconstruction. The second part presents a novel non-intrusive technique for measuring axial and angular velocities. Theoretical and experimental studies, carried out using cross-correlation techniques in a cyclone separator dipleg, confirm the feasibility of on-line velocity measurement. Experimental results from various gas–solids flow facilities, CFB and cyclone, are presented.

[1]  Lihui Peng,et al.  Image reconstruction algorithms for electrical capacitance tomography , 2003 .

[2]  L. Landweber.  An iteration formula for Fredholm integral equations of the first kind , 1951 .

[3]  F. J. Dickin,et al.  Smoothness-constrained inversion for two-dimensional electrical resistance tomography , 1997 .

[4]  Wuqiang Yang,et al.  Role of tomography in gas/solids flow measurement , 2000 .

[5]  A. C. Raptis,et al.  Active ultrasonic cross-correlation flowmeters for mixed-phase pipe flows. [Solid/liquid and solid/gas flows] , 1984 .

[6]  Brian S. Hoyle,et al.  Electrical capacitance tomography for flow imaging: system model for development of image reconstruction algorithms and design of primary sensors , 1992 .

[7]  Wuqiang Yang,et al.  A new image reconstruction method for tomographic investigation of fluidized beds , 2002 .

[8]  Tomasz Dyakowski,et al.  Tomographic measurements of solids mass flow in dense pneumatic conveying: What do we need to know about the flow physics? , 2001 .

[9]  Neil M. White,et al.  Sensors and their Applications VIII , 1997 .

[10]  Shigeru Matsumoto,et al.  Solid particle velocity in vertical gaseous suspension flows , 1986 .

[11]  Wuqiang Yang,et al.  Optimization of an iterative image reconstruction algorithm for electrical capacitance tomography , 1999 .

[12]  Dominique Toye,et al.  Modelling of multiphase flow in packed beds by computer-assisted x-ray tomography , 1996 .

[13]  Jan-Erik Nordtvedt,et al.  A new reconstruction algorithm for process tomography , 1993 .

[14]  Po Box.  Dual-plane Electrical Capacitance System and Usage in Experience , 2002 .

[15]  Tomasz Dyakowski,et al.  Application of capacitance tomography to gas-solid flows , 1997 .

[16]  Karl-Ernst Wirth,et al.  X-ray computer tomography — potential and limitation for the measurement of local solids distribution in circulating fluidized beds , 2000 .

[17]  Roger T. Bonnecaze,et al.  Measurement of angular velocities using electrical impedance tomography , 1998 .

[18]  A. Plaskowski,et al.  Cross Correlation Flowmeters, Their Design and Application , 1987 .

[19]  H. Yan,et al.  Image reconstruction in electrical capacitance tomography using multiple linear regression and regularization , 2001 .

[20]  Wuqiang Yang,et al.  Prior-online iteration for image reconstruction with electrical capacitance tomography , 2004 .

[21]  Geir Anton Johansen,et al.  Recent developments in three-phase flow measurement , 1997 .