Influence of the Laser Wavelength on Harmful Effects on Granite Due to Biofilm Removal

The colonization of stone-built monuments by different organisms (algae, fungi, lichens, bacteria, and cyanobacteria) can lead to biodeterioration of the stone, negatively affecting the artistic value of the heritage. To address this issue, laser cleaning has been widely investigated in recent years, due to the advantages it offers over traditional mechanical and chemical methods: it is gradual, selective, contactless, and environmentally friendly. That said, the laser parameters should be optimized in order to avoid any by-effects on the surface as a result of overcleaning. However, as the adjustment of each parameter to clean polymineralic stones is a difficult task, it would be useful to know the effect of overcleaning on the different forming minerals depending on the wavelength used. In this paper, three different wavelengths (355 nm, 532 nm, and 1064 nm) of a Q-Switch neodymium-doped yttrium aluminum garnet (Nd:Y3Al5O12) laser, commonly known as QS Nd:YAG laser were applied to extract a naturally developed sub-aerial biofilm from Vilachan granite, commonly used in monuments in the Northwest (NW)Iberian Peninsula. In addition to the removal rate of the biofilm, the by-effects induced for fluences higher than the damage threshold of the stone were evaluated using stereomicroscopy, color spectrophotometry, and scanning electron microscopy with energy-dispersive x-ray spectroscopy. The results showed that different removal rates were obtained depending on the wavelength used and 532 nm obtained the highest removal level. In terms of by-effects, biotite melting was registered on all surfaces regardless of the wavelength. In addition, 532 nm seemed to be the most aggressive laser system, inducing the greatest change in appearance as a result of extracting the kaolinite crackled coating and the segregations rich in Fe, which are a result of natural weathering. These changes were translated into colorimetric changes visible to the human eye. The surfaces treated with 355 nm and 1064 nm showed lower surface changes.

[1]  G. Lehmann,et al.  A reassignment of the optical absorption bands in biotites , 1979 .

[2]  Commission 25-PEM Protection et érosion des monuments , 1980 .

[3]  F. Macías,et al.  Mineralogical variability in weathering microsystems of a granitic outcrop of Galicia (Spain) , 1983 .

[4]  Birbhushan Chakrabarti,et al.  Effect of fire damage on natural stonework in buildings , 1996 .

[5]  K. Heymann,et al.  In- Situ Optical measurements of sediment type and phytobenthos of tidal flats: A basis for imaging remote sensing spectroscopy , 1997 .

[6]  T. Taboada,et al.  Pseudomorphic transformation of plagioclases during the weathering of granitic rocks in Galicia (NW Spain) , 1999 .

[7]  J. Braams,et al.  Biodeterioration of stone: a review , 2000 .

[8]  D. Martí,et al.  Interacción fluido-roca a lo largo de las superficies de fractura: efectos mineralógicos y texturales de las alteraciones observadas en el Plutón Granítico de Albalá, SO del Macizo Hercínico Ibérico , 2001 .

[9]  Paraskevi Pouli,et al.  Yellowing effect and discoloration of pigments: experimental and theoretical studies , 2003 .

[10]  M. Montoto,et al.  Application limits of Q-switched Nd:YAG laser irradiation for stone cleaning based on colour measurements , 2003 .

[11]  Paraskevi Pouli,et al.  Comparative study on the application of the 1st and the 3rd harmonic of a Q-switched Nd:YAG laser system to clean black encrustation on marble , 2003 .

[12]  Veronique Carrere,et al.  Comparison of simple techniques for estimating chlorophyll a concentration in the intertidal zone using high spectral-resolution field-spectrometer data , 2004 .

[13]  Á. Török,et al.  Mineralogical and colour changes of quartz sandstones by heat , 2004 .

[14]  J. V. van Thor,et al.  Assignments of the Pfr-Pr FTIR difference spectrum of cyanobacterial phytochrome Cph1 using 15N and 13C isotopically labeled phycocyanobilin chromophore. , 2005, The journal of physical chemistry. B.

[15]  Beatriz Prieto,et al.  Estimation of the potential bioreceptivity of granitic rocks from their intrinsic properties , 2005 .

[16]  J. Delgado Rodrigues,et al.  Indicators and ratings for the compatibility assessment of conservation actions , 2007 .

[17]  W. Krumbein,et al.  Biodeterioration of ancient stone materials from the Persepolis monuments (Iran) , 2008 .

[18]  A. Andreotti,et al.  Py-GC/MS of organic paint binders , 2009 .

[19]  Maria Perla Colombini,et al.  Investigation of the Er:YAG Laser at 2.94 μm to Remove Lichens Growing on Stone , 2009 .

[20]  T. Rivas,et al.  Optimisation of laser removal of biological crusts in granites , 2010 .

[21]  F. Martínez-Verdú,et al.  Measuring the color of granite rocks: A proposed procedure , 2010 .

[22]  Katarina Malaga,et al.  Definition of the procedure to determine the suitability and durability of an anti-graffiti product for application on cultural heritage porous materials , 2011 .

[23]  A. Ramil,et al.  Microstructural study of the origin of color in Rosa Porriño granite and laser cleaning effects , 2011 .

[24]  Mohamed Oujja,et al.  Practical issues in laser cleaning of stone and painted artefacts: optimisation procedures and side effects , 2012 .

[25]  M. P. Fiorucci,et al.  Nd:YVO4 laser removal of graffiti from granite. Influence of paint and rock properties on cleaning efficacy , 2012 .

[26]  Felix Janssen,et al.  Hyperspectral imaging of the microscale distribution and dynamics of microphytobenthos in intertidal sediments , 2013 .

[27]  Teresa Rivas,et al.  Comparison between Methods of Biological Crust Removal on Granite , 2013 .

[28]  I. Osticioli,et al.  Laser ablation of iron-rich black films from exposed granite surfaces , 2014 .

[29]  M. P. Fiorucci,et al.  Effectiveness and harmful effects of removal sulphated black crust from granite using Nd:YAG nanosecond pulsed laser , 2014 .

[30]  Paraskevi Pouli,et al.  Laser-assisted removal of dark cement crusts from mineral gypsum (selenite) architectural elements of peripheral monuments at Knossos , 2015 .

[31]  Mario Mascalchi,et al.  Removal of Verrucaria nigrescens from Carrara marble artefacts using Nd:YAG lasers: comparison among different pulse durations and wavelengths , 2015 .

[32]  P. Pouli,et al.  The two-wavelength laser cleaning methodology; theoretical background and examples from its application on CH objects and monuments with emphasis to the Athens Acropolis sculptures , 2016, Heritage Science.

[33]  José Delgado Rodrigues,et al.  Incompatibility risk assessment procedure for the cleaning of built heritage , 2016 .

[34]  J. S. Pozo-Antonio,et al.  Effectiveness of granite cleaning procedures in cultural heritage: A review. , 2016, The Science of the total environment.

[35]  M. Oujja,et al.  Influence of wavelength on the laser removal of lichens colonizing heritage stone , 2017 .

[36]  J. S. Pozo-Antonio,et al.  Detection of the optimal laser fluence ranges to clean graffiti on silicates , 2017 .

[37]  J. S. Pozo-Antonio,et al.  Laser versus scalpel cleaning of crustose lichens on granite , 2018 .

[38]  J. S. Pozo-Antonio,et al.  Laser-Assisted Removal of Graffiti from Granite: Advantages of the Simultaneous Use of Two Wavelengths , 2018 .

[39]  J. S. Pozo-Antonio,et al.  Using Hyperspectral Imaging to Quantify Phototrophic Biofilms on Granite , 2018 .

[40]  J. S. Pozo-Antonio,et al.  Cleaning of gypsum-rich black crusts on granite using a dual wavelength Q-Switched Nd:YAG laser , 2019, Construction and Building Materials.