Doubly Salient Permanent-Magnet Machine With Skewed Rotor and Six-State Commutating Mode

We propose new concepts for the design, optimization, and control of a doubly salient permanent-magnet machine (DSPM). We employ a uniform pole width so that the width of the rotor pole is the same as that of the stator salient pole. This design aims to minimize the cogging torque. Second, we used a skewed rotor with one-half the pole width to improve the commutation. Finally, based on the flux linkage of the skewed rotor, we used a six-state commutating mode to control the motor. We validated the feasibility of these new design concepts by simulations, field analysis, and experimental measurements of the prototype.

[1]  K.R. Rajagopal,et al.  FE analysis of multiphase doubly salient permanent magnet motors , 2005, IEEE Transactions on Magnetics.

[2]  K.T. Chau,et al.  Torque ripple minimization of doubly salient permanent-magnet motors , 2005, IEEE Transactions on Energy Conversion.

[3]  K. Rajagopal,et al.  FE analysis of multi-phase doubly salient permanent magnet motors , 2005, INTERMAG Asia 2005. Digests of the IEEE International Magnetics Conference, 2005..

[4]  K.T. Chau,et al.  A novel three-phase doubly salient permanent magnet machine for wind power generation , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[5]  K. T. Chau,et al.  Control and operation of a new 8/6-pole doubly salient permanent-magnet motor drive , 2003 .

[6]  Ming Cheng,et al.  Design and analysis of a new doubly salient permanent magnet motor , 2001 .

[7]  K. T. Chau,et al.  Static Characteristics of a New Doubly Salient Permanent Magnet Motor , 2001, IEEE Power Engineering Review.

[8]  Claudia Martis,et al.  On the dynamic model of a doubly-salient permanent-magnet motor , 1998, MELECON '98. 9th Mediterranean Electrotechnical Conference. Proceedings (Cat. No.98CH36056).

[9]  T. Miller,et al.  Prediction of cogging torque using the flux-MMF diagram technique , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[10]  Timothy J. E. Miller,et al.  Design of Brushless Permanent-Magnet Motors , 1994 .

[11]  Thomas A. Lipo,et al.  Sizing and optimal design of doubly salient permanent magnet motors , 1993 .

[12]  T.A. Lipo,et al.  A novel permanent magnet motor with doubly salient structure , 1992, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting.

[13]  Ying Fan,et al.  A new three-phase doubly salient permanent magnet machine for wind power generation , 2006, IEEE Transactions on Industry Applications.

[14]  Yan Yangguang,et al.  Characteristics analysis method of doubly salient permanent magnet motor system , 2005, 2005 International Conference on Electrical Machines and Systems.

[15]  K. T. Chau,et al.  Study on a novel doubly salient permanent-magnet machine with the doubly-fed stator , 2005 .

[16]  Xiaojing Huang,et al.  Nonlinear varying-network magnetic circuit analysis for doubly salient permanent-magnet motors , 2000 .