Microstructural evolution and mechanical properties of thermomechanically processed AZ31 magnesium alloy reinforced by micro-graphite and nano-graphene particles

[1]  A. Salandari-Rabori,et al.  Achievement of fine-grained bimodal microstructures and superior mechanical properties in a multi-axially forged GWZ magnesium alloy containing LPSO structures , 2019, Journal of Alloys and Compounds.

[2]  D. Batory,et al.  Influence of the Chemical Composition of Al/AlC/a-C:H Coatings on the Mechanical Properties of Magnesium Alloy AZ31 , 2018, Metal Science and Heat Treatment.

[3]  A. Salandari-Rabori,et al.  Effect of temperature on microstructural evolution and subsequent enhancement of mechanical properties in a backward extruded magnesium alloy , 2018 .

[4]  A. Salandari-Rabori,et al.  Micro and macro texture evolution during multiaxial forging of a WE43 magnesium alloy , 2018 .

[5]  R. Soltani,et al.  The microstructure, texture, and room temperature mechanical properties of friction stir processed Mg-Y-Nd alloy , 2017 .

[6]  Ł. Kaczmarek,et al.  Plasmochemical modification of aluminum-zinc alloys using NH3-Ar atmosphere with anti-wear coatings deposition , 2017 .

[7]  A. Salandari-Rabori,et al.  Microstructure and superior mechanical properties of a multi-axially forged WE magnesium alloy , 2017 .

[8]  I. Celik.  Structure and surface properties of Al2O3–TiO2 ceramic coated AZ31 magnesium alloy , 2016 .

[9]  D. Abou‐Ras,et al.  Evolution of microstructure and mechanical properties in a hypoeutectic Al–Si–Mg alloy processed by accumulative back extrusion , 2016 .

[10]  P. Menezes,et al.  Mechanical and tribological properties of self-lubricating metal matrix nanocomposites reinforced by carbon nanotubes (CNTs) and graphene – A review , 2015 .

[11]  J. S. Saini,et al.  Mechanical and Wear Properties of SiC/Graphite Reinforced Al359 Alloy-based Metal Matrix Composite , 2015 .

[12]  I. Dinaharan,et al.  Synthesize of AZ31/TiC magnesium matrix composites using friction stir processing , 2015 .

[13]  A. Gerlich,et al.  Fabrication of metal matrix composites by friction stir processing with different Particles and processing parameters , 2014 .

[14]  Hamid Reza Abedi,et al.  Mechanical properties improvement of cast AZ80 Mg alloy/nano-particles composite via thermomechanical processing , 2014 .

[15]  METAL-GRAPHENE NANOCOMPOSITES WITH ENHANCED MECHANICAL PROPERTIES : A REVIEW 4 9 TID , 2014 .

[16]  S. Tjong.  Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets , 2013 .

[17]  H. Sarmadi,et al.  Friction and wear performance of copper–graphite surface composites fabricated by friction stir processing (FSP) , 2013 .

[18]  A. M. Asl,et al.  Role of hybrid ratio in microstructural, mechanical and sliding wear properties of the Al5083/Graphitep/Al2O3p a surface hybrid nanocomposite fabricated via friction stir processing method , 2013 .

[19]  Xiaochun Li,et al.  Novel nanoprocessing route for bulk graphene nanoplatelets reinforced metal matrix nanocomposites , 2012 .

[20]  Liping Zhao,et al.  Fabrication of exfoliated graphene-based polypropylene nanocomposites with enhanced mechanical and thermal properties , 2011 .

[21]  A. Bhowmick,et al.  A review on the mechanical and electrical properties of graphite and modified graphite reinforced polymer composites , 2011 .

[22]  G. Faraji,et al.  Experimental Investigation of Magnesium-Base Nanocomposite Produced by Friction Stir Processing: Effects of Particle Types and Number of Friction Stir Processing Passes , 2011 .

[23]  S. R. Bakshi,et al.  A comparison of mechanical and wear properties of plasma sprayed carbon nanotube reinforced aluminum composites at nano and macro scale , 2011 .

[24]  G. Faraji,et al.  Effect of Process Parameters on Microstructure and Micro-hardness of AZ91/Al2O3 Surface Composite Produced by FSP , 2011 .

[25]  Xiaojun Wang,et al.  Damping capacities and tensile properties of magnesium matrix composites reinforced by graphite particles , 2010 .

[26]  N. Koratkar,et al.  Enhanced mechanical properties of nanocomposites at low graphene content. , 2009, ACS nano.

[27]  W. Poole,et al.  Enhanced properties of Mg-based nano-composites reinforced with Al2O3 nano-particles , 2009 .

[28]  S. Kashani-Bozorg,et al.  Microstructures and mechanical properties of Al/Al2O3 surface nano-composite layer produced by friction stir processing , 2009 .

[29]  J. C. Huang,et al.  On the Hardening of Friction Stir Processed Mg-AZ31 Based Composites with 5–20% Nano-ZrO2 and Nano-SiO2 Particles , 2006 .

[30]  Y. Morisada,et al.  Effect of friction stir processing with SiC particles on microstructure and hardness of AZ31 , 2006 .

[31]  J. C. Huang,et al.  Mg based nano-composites fabricated by friction stir processing , 2006 .

[32]  Y. Morisada,et al.  MWCNTs/AZ31 surface composites fabricated by friction stir processing , 2006 .

[33]  C. B. Lin,et al.  The tribological characteristics of A356.2Al alloy/Gr(p) composites , 2004 .

[34]  J. Majumdar,et al.  Laser composite surfacing of a magnesium alloy with silicon carbide , 2003 .

[35]  R. Mishra,et al.  Friction stir processing: a novel technique for fabrication of surface composite , 2003 .

[36]  Rajiv S. Mishra,et al.  Friction Stir Welding and Processing , 2007 .

[37]  Rajiv S. Mishra,et al.  Friction Stir Processing: A New Grain Refinement Technique to Achieve High Strain Rate Superplasticity in Commercial Alloys , 2001 .

[38]  S. Tjong,et al.  Tribological behaviour of SiC particle-reinforced copper matrix composites , 2000 .

[39]  A. Mukherjee,et al.  High Strain Rate Superplasticity in a Friction Stir Processed 7075 Al Alloy , 1999 .

[40]  K. Landry,et al.  Wettability of carbon by aluminum and aluminum alloys , 1998 .

[41]  A. Alpas,et al.  Wear mechanisms in hybrid composites of Graphite-20 Pct SiC in A356 Aluminum Alloy (Al-7 Pct Si-0.3 Pct Mg) , 1995 .