Highly Responsive PEG/Gold Nanoparticle Thin-Film Humidity Sensor via Inkjet Printing Technology.

In this study, a highly responsive humidity sensor is developed by printing gold nanoparticles (GNPs) grafted with a hygroscopic polymer. These GNPs are inkjet-printed to form a uniform thin film over an interdigitated electrode with a controllable thickness by adjusting the printing parameters. The resistance of the printed GNP thin film decreases significantly upon exposure to water vapor and exhibits a semi-log relationship with relative humidity (RH). The sensor can detect RH variations from 1.8 to 95% with large resistance changes up to 4 orders of magnitude with no hysteresis and small temperature dependence. In addition, with a small thickness, the sensor can reach absorption equilibrium quickly with response and recovery times of ≤1.2 and ≤3 s, respectively. The fast response to humidity changes also allows the GNP thin-film sensor to distinguish signals from intermittent humidification/dehumidification cycles with a frequency up to 2.5 Hz. The printed sensors on flexible substrates show little sensitivity to bending deformation and can be embedded in a mask for human respiratory detection. In summary, this study demonstrates the feasibility of applying printing technology for the fabrication of thin-film humidity sensors, and the methodology developed can be further applied to fabricate many other types of nanoparticle-based sensor devices.

[1]  H. Weller,et al.  Effect of the spacer structure on the stability of gold nanoparticles functionalized with monodentate thiolated poly(ethylene glycol) ligands. , 2013, Langmuir : the ACS journal of surfaces and colloids.

[2]  Tingting Yang,et al.  Simultaneous High Sensitivity Sensing of Temperature and Humidity with Graphene Woven Fabrics. , 2017, ACS applied materials & interfaces.

[3]  Zhaoxiong Xie,et al.  High-sensitivity humidity sensor based on a single SnO(2) nanowire. , 2007, Journal of the American Chemical Society.

[4]  John T.W. Yeow,et al.  A capacitive humidity sensor based on ordered macroporous silicon with thin film surface coating , 2010 .

[5]  Shinya Kano,et al.  Fast-Response and Flexible Nanocrystal-Based Humidity Sensor for Monitoring Human Respiration and Water Evaporation on Skin. , 2017, ACS sensors.

[6]  G. Grübel,et al.  Structure and Stability of PEG‐ and Mixed PEG‐Layer‐Coated Nanoparticles at High Particle Concentrations Studied In Situ by Small‐Angle X‐Ray Scattering , 2018 .

[7]  Ben Clifford,et al.  Printed-Sensor-on-Chip devices – Aerosol jet deposition of thin film relative humidity sensors onto packaged integrated circuits , 2018 .

[8]  H. Yin,et al.  Synthesis, field emission and humidity sensing characteristics of monoclinic VO2 nanostructures , 2011 .

[9]  Jinho Bae,et al.  All-printed humidity sensor based on graphene/methyl-red composite with high sensitivity , 2016 .

[10]  Hiroyuki Kudo,et al.  Flexible humidity sensor in a sandwich configuration with a hydrophilic porous membrane , 2009 .

[11]  P. Li,et al.  Fabrication and characterization of an ultrasensitive humidity sensor based on metal oxide/graphene hybrid nanocomposite , 2016 .

[12]  Nam Ki Min,et al.  Novel resistive-type humidity sensor based on multiwall carbon nanotube/polyimide composite films , 2010 .

[13]  Gwiy-Sang Chung,et al.  High-sensitivity humidity sensors with ZnO nanorods based two-port surface acoustic wave delay line , 2012 .

[14]  Xinjian Li,et al.  Capacitive humidity sensing properties of SiC nanowires grown on silicon nanoporous pillar array , 2012 .

[15]  P. K. Guha,et al.  CMOS integration of inkjet-printed graphene for humidity sensing , 2015, Scientific Reports.

[16]  C. R. Becer,et al.  Water uptake of hydrophilic polymers determined by a thermal gravimetric analyzer with a controlled humidity chamber , 2007 .

[17]  K. Varahramyan,et al.  Humidity sensor based on ultrathin polyaniline film deposited using layer-by-layer nano-assembly , 2006 .

[18]  Yong Li,et al.  Study on humidity sensing property based on TiO2 porous film and polystyrene sulfonic sodium , 2009 .

[19]  Neus G Bastús,et al.  Little adjustments significantly improve the Turkevich synthesis of gold nanoparticles. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[20]  A. Tiwari,et al.  Exploring fiber optic approach to sense humid environment over nano-crystalline zinc oxide film. , 2009, Talanta.

[21]  Xiangdong Chen,et al.  Humidity sensing behaviors of graphene oxide-silicon bi-layer flexible structure , 2012 .

[22]  Yang Li,et al.  Poly(4-vinylpyridine)/carbon black composite as a humidity sensor , 2007 .

[23]  S. Seol,et al.  Microwave synthesis of gold nanoparticles: Effect of applied microwave power and solution pH , 2011 .

[24]  G. Grübel,et al.  Ligand Layer Engineering To Control Stability and Interfacial Properties of Nanoparticles. , 2016, Langmuir : the ACS journal of surfaces and colloids.

[25]  R. Willey,et al.  Mechanistic aspects of methanol partial oxidation over supported iron oxide aerogels , 2001 .

[26]  Linxi Hou,et al.  Humidity-Responsive Gold Aerogel for Real-Time Monitoring of Human Breath. , 2018, Langmuir : the ACS journal of surfaces and colloids.

[27]  Le Cai,et al.  Air-Stable Humidity Sensor Using Few-Layer Black Phosphorus. , 2017, ACS applied materials & interfaces.

[28]  Jin Luo,et al.  Decoration of Nanofibrous Paper Chemiresistors with Dendronized Nanoparticles toward Structurally Tunable Negative‐Going Response Characteristics to Human Breathing and Sweating , 2017 .

[29]  Gang Xu,et al.  A new 3D cupric coordination polymer as chemiresistor humidity sensor: narrow hysteresis, high sensitivity, fast response and recovery , 2017, Science China Chemistry.

[30]  Mu-jie Yang,et al.  A fast response resistance-type humidity sensor based on organic silicon containing cross-linked copolymer , 2006 .

[31]  Yun Liu,et al.  Humidity sensing properties of single Au-decorated boron nitride nanotubes , 2013 .

[32]  N. Tsubokawa,et al.  A Novel Gas Sensor from Poly(ethylene glycol)-Grafted Carbon Black. Responsibility of Electric Resistance of Poly(ethylene glycol)- Grafted Carbon Black against Humidity and Solvent Vapor , 1999 .

[33]  L. P. Eksperiandova,et al.  Recent trends of ceramic humidity sensors development: A review , 2016 .

[34]  Jongman Cho,et al.  Role of Morphological Structure, Doping, and Coating of Different Materials in the Sensing Characteristics of Humidity Sensors , 2014, Sensors.

[35]  Muthukumaran Packirisamy,et al.  A polyimide based resistive humidity sensor , 2005 .

[36]  P. Li,et al.  Facile fabrication of high-performance QCM humidity sensor based on layer-by-layer self-assembled polyaniline/graphene oxide nanocomposite film , 2018 .

[37]  W. Chow,et al.  Kinetics of water absorption and thermal properties of poly(lactic acid)/organomontmorillonite/poly(ethylene glycol) nanocomposites , 2011 .

[38]  Naoki Toshima,et al.  Bimetallic nanoparticles—novel materials for chemical and physical applications , 1998 .

[39]  D. Fernig,et al.  Determination of size and concentration of gold nanoparticles from UV-vis spectra. , 2007, Analytical chemistry.

[40]  Musammir Khan,et al.  Effect of Humidity on Electrical Conductivity of Pristine and Nanoparticle-Loaded Hydrogel Nanomembranes , 2015 .

[41]  Gwo-Bin Lee,et al.  Humidity Sensors: A Review , 2005 .

[42]  Y. Liao,et al.  Inkjet Printed Conductive Tracks for Printed Electronics , 2015 .

[43]  Jing Wang,et al.  Sensitivity and complex impedance of nanometer zirconia thick film humidity sensors , 2009 .

[44]  Ying-Chih Liao,et al.  Flexible miniaturized nickel oxide thermistor arrays via inkjet printing technology. , 2013, ACS applied materials & interfaces.