Progress in the Synthetic Holographic Stereogram Printing Technique

The synthetic holographic stereogram printing technique can achieve a three-dimensional (3D) display of a scene. The development and research status of the synthetic holographic stereogram printing technique is introduced in this paper. We propose a two-step method, an infinite viewpoint camera method, a single-step Lippmann method, a direct-write digital holography (DWDH) method and an effective perspective images’ segmentation and mosaicking (EPISM) method. The synthetic holographic stereogram printing technique is described, including the holographic display with large format, the large field of view with no distortion, the printing efficiency, the color reproduction characteristics, the imaging quality, the diffraction efficiency, the development of a holographic recording medium, the noise reduction, and the frequency response analysis of holographic stereograms.

[1]  Hiroshi Yoshikawa,et al.  Development of a compact direct fringe printer for computer-generated holograms , 2004, IS&T/SPIE Electronic Imaging.

[2]  Young-Min Kim,et al.  Comparison of System Properties for Wave-Front Holographic Printers , 2014 .

[3]  M C King,et al.  A new approach to computer-generated holography. , 1970, Applied optics.

[4]  Masahiro Yamaguchi,et al.  High‐speed recording of full‐parallax holographic stereograms by a parallel exposure system , 1996 .

[5]  Guofan Jin,et al.  Hybrid polarization-angle multiplexing for volume holography in gold nanoparticle-doped photopolymer. , 2014, Optics letters.

[6]  S. Benton,et al.  Holographic Imaging , 2008 .

[7]  Takanori Senoh,et al.  Wavefront printing technique with overlapping approach toward high definition holographic image reconstruction , 2016, SPIE Commercial + Scientific Sensing and Imaging.

[8]  David Brotherton-Ratcliffe,et al.  Digital holographic printing using pulsed RGB lasers , 2011 .

[9]  Andrius Vilkauskas,et al.  Comparison of diffraction patterns exposed by pulsed and CW lasers on positive-tone photoresist. , 2017, Applied optics.

[10]  Jisoo Hong,et al.  Color Holographic Wavefront Printing Technique for Realistic Representation , 2016, IEEE Transactions on Industrial Informatics.

[11]  Jisoo Hong,et al.  Color wavefront printer with mosaic delivery of primary colors , 2015 .

[12]  Takeshi Yamaguchi,et al.  Computer-generated holograms for 3D display , 2009 .

[13]  Takeshi Yamaguchi,et al.  Computer-generated image hologram , 2011 .

[14]  V. Michael Bove,et al.  Reconfigurable image projection holograms , 2006 .

[15]  Masahiro Yamaguchi,et al.  Reduction of the recorded speckle noise in holographic 3D printer. , 2013, Optics express.

[16]  Hiroshi Yoshikawa,et al.  Review of Holographic Printers for Computer-Generated Holograms , 2016, IEEE Transactions on Industrial Informatics.

[17]  Holographic storage of three-dimensional image and data using photopolymer and polymer dispersed liquid crystal films , 2016 .

[18]  Fei Yang,et al.  Digital color management in full-color holographic three-dimensional printer. , 2012, Applied optics.

[19]  Hans I. Bjelkhagen,et al.  Ultra-Realistic Imaging: Advanced Techniques in Analogue and Digital Colour Holography , 2020 .

[20]  Mark E. Lucente,et al.  Compact prototype one-step Ultragram printer , 1993, Electronic Imaging.

[21]  P. Blanche,et al.  Holographic three-dimensional telepresence using large-area photorefractive polymer , 2010, Nature.

[22]  Takanori Senoh,et al.  An analysis of printing conditions for wavefront overlapping printing , 2017, OPTO.

[23]  Osamu Miyamoto,et al.  Volume hologram printer to record the wavefront of three-dimensional objects , 2012 .

[24]  Guofan Jin,et al.  Volume holographic printing using unconventional angular multiplexing for three-dimensional display. , 2016, Applied optics.

[25]  Byoungho Lee,et al.  Resolution enhancement of holographic printer using a hogel overlapping method. , 2013, Optics express.

[26]  Yutaka Kawabe,et al.  Fully updatable three-dimensional holographic stereogram display device based on organic monolithic compound. , 2013, Optics express.

[27]  Yingqing Huang,et al.  Resolution matching in laser direct printing of a computer-generated hologram , 2017 .

[28]  Jinwoong Kim,et al.  Holographic stereogram printing under the non-vibration environment , 2014, Sensing Technologies + Applications.

[29]  P. Blanche,et al.  An updatable holographic three-dimensional display , 2008, Nature.

[30]  Masahiro Yamaguchi.  Light-field and holographic three-dimensional displays [Invited]. , 2016, Journal of the Optical Society of America. A, Optics, image science, and vision.

[31]  Masahiro Yamaguchi,et al.  Full-Parallax Holographic Light-Field 3-D Displays and Interactive 3-D Touch , 2017, Proceedings of the IEEE.

[32]  D J Debitetto,et al.  Holographic panoramic stereograms synthesized from white light recordings. , 1969, Applied optics.

[33]  Alejandro Madrid Sánchez,et al.  Design, development, and implementation of a low-cost full-parallax holoprinter , 2018 .

[34]  Hoonjong Kang,et al.  Three-dimensional imaging of cultural heritage artifacts with holographic printers , 2016, International School on Quantum Electronics: Laser Physics and Applications.

[35]  Jisoo Hong,et al.  Seamless full color holographic printing method based on spatial partitioning of SLM. , 2015, Optics express.

[36]  Hoonjong Kang,et al.  Holographic Printing of White-Light Viewable Holograms and Stereograms , 2013 .

[37]  Y. Tomita,et al.  Silica-nanoparticle-dispersed methacrylate photopolymers with net diffraction efficiency near 100%. , 2004, Applied optics.

[38]  Alexander V Morozov,et al.  3D holographic printer: fast printing approach. , 2014, Optics express.

[39]  Hans I. Bjelkhagen,et al.  Ultrarealistic imaging: the future of display holography , 2014 .

[40]  N Ohyama,et al.  High-quality recording of a full-parallax holographic sterogram with a digital diffuser. , 1994, Optics letters.

[41]  Sundeep Jolly,et al.  Direct fringe writing architecture for photorefractive polymer-based holographic displays: analysis and implementation , 2013 .

[42]  Md. Shamim Ahsan,et al.  Three-dimensional hologram printing by single beam femtosecond laser direct writing , 2018 .

[43]  M. Lucente.  The First 20 Years of Holographic Video – and the Next 20 , 2011 .

[44]  Sergey B. Odinokov,et al.  High-aperture diffractive lens for holographic printer , 2016, SPIE/COS Photonics Asia.

[45]  Michael A. Klug,et al.  Holograms for the Masses , 2013 .

[46]  Masahiro Yamaguchi,et al.  High-density recording of full-color full-parallax holographic stereogram , 2008, SPIE OPTO.

[47]  Yingqing Huang,et al.  Method of single-step full parallax synthetic holographic stereogram printing based on effective perspective images' segmentation and mosaicking. , 2017, Optics express.

[48]  Mark Lucente.  Diffraction-specific fringe computation for electro-holography , 1994 .

[49]  Wataru Sakai,et al.  Real-time three-dimensional holographic display using a monolithic organic compound dispersed film , 2012 .

[50]  Hiroshi Yoshikawa.  Research activities on digital holographic displays in Japan , 2011, Defense + Commercial Sensing.

[51]  Guofan Jin,et al.  Improvement of volume holographic performance by plasmon-induced holographic absorption grating , 2013 .

[52]  D. Gabor.  A New Microscopic Principle , 1948, Nature.

[53]  P S Hilaire.  Modulation transfer function and optimum sampling of holographic stereograms. , 1994, Applied optics.

[54]  Kenji Yamamoto,et al.  Three-dimensional reflection screens fabricated by holographic wavefront printer , 2018 .

[55]  Evangelos Mirlis,et al.  Color holography to produce highly realistic three-dimensional images. , 2008, Applied optics.

[56]  Masahiro Yamaguchi,et al.  Full-color holographic 3D printer , 2003, IS&T/SPIE Electronic Imaging.

[57]  Hoonjong Kang,et al.  Numerical reconstruction of a full parallax holographic stereogram with radial distortion. , 2014, Optics express.

[58]  Takeshi,et al.  Computer-generated holograms for 3D display（ Invited Paper） , 2009 .

[59]  Xingpeng Yan,et al.  Optimization of exit pupil function: improvement on the OTF of full parallax?holographic stereograms , 2013 .

[60]  Stephen A. Benton,et al.  Ultragram: a generalized holographic stereogram , 1991, Electronic Imaging.

[61]  L E Helseth,et al.  Optical transfer function of three-dimensional display systems. , 2006, Journal of the Optical Society of America. A, Optics, image science, and vision.

[62]  Yingjie Yu,et al.  Study on permanent holographic recording in trimethylol propane triacrylate-based photopolymer films with high diffraction efficiency , 2017 .

[63]  Michael W. Halle,et al.  Fast computer graphics rendering for full parallax spatial displays , 1997, Electronic Imaging.

[64]  Yingqing Huang,et al.  Characteristic and optimization of the effective perspective images’ segmentation and mosaicking (EPISM) based holographic stereogram: an optical transfer function approach , 2018, Scientific Reports.

[65]  Hui Wang,et al.  Three-dimensional imaging and display of real-existing scene using fringe , 2013, Other Conferences.

[66]  Xianwei Rong,et al.  Multichannel holographic recording method for three-dimensional displays. , 2011, Applied optics.

[67]  Michael W. Halle.  The Generalized Holographic Stereogram , 1991 .

[68]  Masahiro Yamaguchi,et al.  Holographic three-dimensional printer: new method. , 1992, Applied optics.