Electric Field Sensor Based on Piezoelectric Bending Effect for Wide Range Measurement

In this paper, we report on the new design of an electric field sensor based on piezoelectric bending effect in a capacitive-sensing method. The bipolar electric field sensor with a range from -22 to 22 kV/cm concentrates on a bending structure to enlarge the piezoelectric effect and to control its bending orientation. It performs with a much higher sensitivity of 0.448 pF/(kV/cm) or 5.78%/(kV/cm) and has a better resolution of 7.0 V/cm at E=0. Factors influencing the capacitance response are also discussed, which might further optimize the sensitivity. Moreover, the analytical model and experimental results make an agreement on the reasonability of this electric field sensor, gaining an insightful guide to the potential capacitive-sensing electric field chip sensor widely distributed in sensor networks.

[1]  Clarence W. de Silva,et al.  Recent advances in MEMS sensor technology – biomedical applications , 2012, IEEE Instrumentation & Measurement Magazine.

[2]  Xiaoping Liao,et al.  Measurements on Intermodulation Distortion of Capacitive Power Sensor Based on MEMS Cantilever Beam , 2014, IEEE Sensors Journal.

[3]  N. Lovell,et al.  Characterization of a capacitive tactile shear sensor for application in robotic and upper limb prostheses , 2011 .

[4]  Rong Zeng,et al.  Development and Application of Integrated Optical Sensors for Intense E-Field Measurement , 2012, Sensors.

[5]  Gerhard P. Hancke,et al.  Industrial Wireless Sensor Networks: Challenges, Design Principles, and Technical Approaches , 2009, IEEE Transactions on Industrial Electronics.

[6]  Ulrich Gabbert,et al.  Feedback/feedforward control of hysteresis-compensated piezoelectric actuators for high-speed scanning applications , 2015 .

[7]  Wei Li,et al.  A Monolithic Self-Sensing Precision Stage: Design, Modeling, Calibration, and Hysteresis Compensation , 2015, IEEE/ASME Transactions on Mechatronics.

[8]  Yu Huang,et al.  A New Sensitivity-Improving Method for Piezoelectric Resonance Mass Sensors Through Cantilever Cross-Section Modification , 2014, IEEE Transactions on Industrial Electronics.

[9]  Clarence W. de Silva,et al.  Recent advances in MEMS sensor technology-mechanical applications , 2012, IEEE Instrumentation & Measurement Magazine.

[10]  Pierluigi Siano,et al.  New Trends in Intelligent Energy Systems–An Industrial Electronics Point of View , 2015, IEEE Transactions on Industrial Electronics.

[11]  Steven B. Leeb,et al.  A Retrofit Capacitive Sensing Occupancy Detector Using Fluorescent Lamps , 2012, IEEE Transactions on Industrial Electronics.

[12]  K. Bhat.  Silicon Micromachined Pressure Sensors , 2012 .

[13]  George T. Flowers,et al.  Electrical Noise in MEMS Capacitive Elements Resulting From Environmental Mechanical Vibrations in Harsh Environments , 2011, IEEE Transactions on Industrial Electronics.

[14]  Mehmet Rasit Yuce,et al.  FM-based piezoelectric strain voltage sensor at ultra-low frequencies with wireless capability , 2013 .

[15]  Qingsong Xu,et al.  Identification and Compensation of Piezoelectric Hysteresis Without Modeling Hysteresis Inverse , 2013, IEEE Transactions on Industrial Electronics.

[16]  Richard Horn,et al.  Focused Electric Field across the Voltage Sensor of Potassium Channels , 2005, Neuron.

[17]  Jun Hu,et al.  In-plane longitudinal converse magnetoelectric effect in laminated composites: Aiming at sensing wide range electric field , 2015 .

[18]  M.P. Bahrman,et al.  The ABCs of HVDC transmission technologies , 2007, IEEE Power and Energy Magazine.

[19]  Tao Hu.  Design and Fabrication of a Miniature Electric Field Sensor Based on Microfabricaton Technology , 2006 .

[20]  F. Baronti,et al.  Battery Management System: An Overview of Its Application in the Smart Grid and Electric Vehicles , 2013, IEEE Industrial Electronics Magazine.

[21]  K. Hidaka,et al.  Progress in Japan of space charge field measurement in gaseous dielectrics using a Pockels sensor , 1996 .

[22]  Ian F. Akyildiz,et al.  Sensor Networks , 2002, Encyclopedia of GIS.

[23]  Garret E. O’Donnell,et al.  Industrial power and energy metering – a state-of-the-art review , 2013 .

[24]  Xianxiang Chen,et al.  Design and testing of a micromechanical resonant electrostatic field sensor , 2006 .

[25]  K. Najafi,et al.  Bent-beam strain sensors , 1996 .

[26]  Behraad Bahreyni,et al.  Micromachined electric field sensor to measure AC and DC fields in power systems , 2009, 2009 IEEE Power & Energy Society General Meeting.