Innovative SU-8 Lithography Techniques and Their Applications

SU-8 has been widely used in a variety of applications for creating structures in micro-scale as well as sub-micron scales for more than 15 years. One of the most common structures made of SU-8 is tall (up to millimeters) high-aspect-ratio (up to 100:1) 3D microstructure, which is far better than that made of any other photoresists. There has been a great deal of efforts in developing innovative unconventional lithography techniques to fully utilize the thick high aspect ratio nature of the SU-8 photoresist. Those unconventional lithography techniques include inclined ultraviolet (UV) exposure, back-side UV exposure, drawing lithography, and moving-mask UV lithography. In addition, since SU-8 is a negative-tone photoresist, it has been a popular choice of material for multiple-photon interference lithography for the periodic structure in scales down to deep sub-microns such as photonic crystals. These innovative lithography techniques for SU-8 have led to a lot of unprecedented capabilities for creating unique micro- and nano-structures. This paper reviews such innovative lithography techniques developed in the past 15 years or so.

[1]  Martin Wegener,et al.  New Route to Three‐Dimensional Photonic Bandgap Materials: Silicon Double Inversion of Polymer Templates , 2006 .

[2]  K. Wong,et al.  Fabrication of large-size photonic crystals by holographic lithography using a lens array , 2012 .

[3]  Jeung Sang Go,et al.  A novel fabrication of in-channel 3-D micromesh structure using maskless multi-angle exposure and its microfilter application , 2003, The Sixteenth Annual International Conference on Micro Electro Mechanical Systems, 2003. MEMS-03 Kyoto. IEEE.

[4]  Kabseog Kim,et al.  High aspect ratio tapered hollow metallic microneedle arrays with microfluidic interconnector , 2006 .

[5]  Steve Arscott,et al.  Integrated microfluidics based on multi-layered SU-8 for mass spectrometry analysis , 2004 .

[6]  F. Tseng,et al.  A novel fabrication technology for smooth 3D inclined polymer microstructures with adjustable angles , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[7]  Steven A. Soper,et al.  Out-of-plane microlens array fabricated using ultraviolet lithography , 2005 .

[8]  Yoonsu Choi,et al.  Continuously-varying, three-dimensional SU-8 structures: fabrication of inclined magnetic actuators , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[9]  Shuichi Shoji,et al.  An all SU-8 microfluidic chip with built-in 3D fine microstructures , 2006 .

[10]  O. Tabata,et al.  Embedded Microstructure Fabrication Using Developer-Permeability of Semi-Cross-Linked Negative Resist , 2010, Journal of Microelectromechanical Systems.

[11]  R. G. Denning,et al.  Fabrication of photonic crystals for the visible spectrum by holographic lithography , 2000, Nature.

[12]  Ute Drechsler,et al.  SU-8 for real three-dimensional subdiffraction-limit two-photon microfabrication , 2004 .

[13]  Jeong-Bong Lee,et al.  Ferromagnetic 3-D impellor-shaped micro-stirrer bar for micromixing , 2007, SPIE Microtechnologies.

[14]  P. Vettiger,et al.  Fabrication of photoplastic high-aspect ratio microparts and micromolds using SU-8 UV resist , 1998 .

[15]  Mark G. Allen,et al.  Integrated vertical screen microfilter system using inclined SU-8 structures , 2003, The Sixteenth Annual International Conference on Micro Electro Mechanical Systems, 2003. MEMS-03 Kyoto. IEEE.

[16]  Jeung Sang Go,et al.  In-channel 3-D micromesh structures using maskless multi-angle exposures and their microfilter application , 2004 .

[17]  Hyungil Jung,et al.  Drawing Lithography: Three‐Dimensional Fabrication of an Ultrahigh‐Aspect‐Ratio Microneedle , 2010, Advanced materials.

[18]  Kyehwan Gil,et al.  A tetrahedral three-facet micro mirror with the inclined deep X-ray process , 2001 .

[19]  M. Laudon,et al.  Mechanical characterization of a new high-aspect-ratio near UV-photoresist , 1998 .

[20]  Rosanne M Guijt,et al.  Maskless photolithography using UV LEDs. , 2008, Lab on a chip.

[21]  Ki-Hun Jeong,et al.  Polymeric synthesis of biomimetic artificial compound eyes , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[22]  Guy Voirin,et al.  One-step 3D shaping using a gray-tone mask for optical and microelectronic applications , 1994 .

[23]  Manhee Han,et al.  Microfabrication of 3D Oblique Structures by Inclined UV Lithography , 2002 .

[24]  M. Madou,et al.  One-step maskless grayscale lithography for the fabrication of 3-dimensional structures in SU-8 , 2011 .

[25]  Sung-Keun Lee,et al.  3D microfabrication with inclined/rotated UV lithography , 2004 .

[26]  Wanjun Wang,et al.  Out-of-plane polymer refractive microlens fabricated based on direct lithography of SU-8 , 2004 .

[27]  C. Cremers,et al.  SU-8 as resist material for deep X-ray lithography , 2001 .

[28]  Gwo-Bin Lee,et al.  A new fabrication process for ultra-thick microfluidic microstructures utilizing SU-8 photoresist , 2002 .

[29]  O. Tabata,et al.  Moving mask LIGA (M/sup 2/LIGA) process for control of side wall inclination , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[30]  Toshiyuki Tsuchiya,et al.  Moving mask UV lithography for three-dimensional structuring , 2007 .

[31]  N. D. Rooij,et al.  Soft, entirely photoplastic probes for scanning force microscopy , 1999 .

[32]  G.-A. Racine,et al.  Microfabrication of 3D multidirectional inclined structures by UV lithography and electroplating , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.

[33]  P. Vettiger,et al.  High-aspect-ratio, ultrathick, negative-tone near-uv photoresist for MEMS applications , 1997, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots.

[34]  Yong-Kyu Yoon,et al.  High-aspect-ratio tapered structures using an integrated lens technique , 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.

[35]  L. Cauller,et al.  Biocompatible SU-8-Based Microprobes for Recording Neural Spike Signals From Regenerated Peripheral Nerve Fibers , 2008, IEEE Sensors Journal.

[36]  Chong H. Ahn,et al.  A tapered hollow metallic microneedle array using backside exposure of SU-8 , 2004 .

[37]  A. Yariv,et al.  Holographic interference lithography for integrated optics , 1978, IEEE Transactions on Electron Devices.

[38]  Wanjun Wang,et al.  Numerical and experimental study of an out-of-plane prealigned refractive microlens fabricated using ultraviolet lithography method , 2004 .

[39]  Y. Huangb,et al.  UV-LIGA interferometer biosensor based on the SU-8 optical waveguide , 2005 .

[40]  Luke P. Lee,et al.  Biologically Inspired Artificial Compound Eyes , 2006, Science.

[41]  Daniel L. Feeback,et al.  Microfabrication and test of a three-dimensional polymer hydro-focusing unit for flow cytometry applications , 2005 .

[42]  Arun K. Nallani,et al.  Characterization of SU-8 as a photoresist for electron-beam lithography , 2003, SPIE Microtechnologies.

[43]  M. Dawson,et al.  Mask-free photolithographic exposure using a matrix-addressable micropixellated AlInGaN ultraviolet light-emitting diode , 2005 .

[44]  Fan-Gang Tseng,et al.  Application of 3D glycerol-compensated inclined-exposure technology to an integrated optical pick-up head , 2004 .

[45]  Yong-Kyu Yoon,et al.  Multidirectional UV Lithography for Complex 3-D MEMS Structures , 2006, Journal of Microelectromechanical Systems.

[46]  Jeffrey D. Gelorme,et al.  High-aspect-ratio resist for thick-film applications , 1995, Advanced Lithography.

[47]  Andrew A. Bettiol,et al.  Three-dimensional nanolithography using proton beam writing , 2003 .