Laboratory testing and finite element simulation of the structural response of an adobe masonry building under horizontal loading

Abstract This paper is concerned with the calibration and validation of a numerical modelling approach for adobe masonry buildings under horizontal loading. The paper first reviews the state-of-the-art in experimental and computational research of adobe structures and then presents results obtained from monotonic lateral loading laboratory tests on a 1:2 scaled unreinforced adobe masonry building. Through the experimental investigation conducted, useful conclusions concerning the initiation and propagation of cracking failure are deduced. In addition, damage limit states at different levels of deformation are identified. Experimental results verify that the response of adobe structures to horizontal loads is critically affected by weak bonding between the masonry units and mortar joints and by lack of effective diaphragmatic function at roof level. Based on experimental material data, a 3D finite element (FE) continuum model is developed and calibrated to reproduce the test structure’s force–displacement response and mode of failure. An isotropic damaged plasticity constitutive law is adopted for the numerical simulation of adobe masonry and the use of appropriate modelling parameters is discussed. The FE analyses carried out reveal that the global structural behaviour is primarily influenced by the tensile response assigned to the homogenized masonry medium. Results show that, despite its generic limitations and simplifications, FE continuum macro-modelling can approximate the structural behaviour of horizontally loaded adobe masonry construction with sufficient accuracy. In order to enrich the available information on the seismic behaviour of adobe structures, the calibrated FE model is also subjected to time-history analysis using an accelerogram recorded during a real earthquake.

[1]  D. Benedetti,et al.  Shaking table tests on 24 simple masonry buildings , 1998 .

[2]  Dm Dowling.  Seismic strengthening of adobe-mudbrick houses , 2006 .

[3]  Rui Pinho,et al.  Displacement-Based Fragility Curves for Seismic Assessment of Adobe Buildings in Cusco, Peru , 2012 .

[4]  C. Meyer.  Numerical Simulations of the Mechanical Behavior of Adobe , 2013 .

[5]  Aiko Furukawa,et al.  Failure process of masonry buildings during earthquake and associated casualty risk evaluation , 2009 .

[6]  E. Leroy Tolles.  Survey of damage to historic adobe buildings after the January 1994 Northridge earthquake , 1996 .

[7]  A. Figueiredo,et al.  Seismic retrofitting solution of an adobe masonry wall , 2013 .

[8]  Bijan Samali,et al.  Seismic Capacity Comparison between Square and Circular Plan Adobe Construction , 2011 .

[9]  Guy T. Houlsby,et al.  How the dilatancy of soils affects their behaviour , 1991 .

[10]  Paulo B. Lourenço,et al.  CONTINUUM MODEL FOR MASONRY: PARAMETER ESTIMATION AND VALIDATION , 1998 .

[11]  Hasan Husnu Korkmaz,et al.  Shaking table tests on strengthening of masonry structures against earthquake hazard , 2010 .

[12]  Robin Spence,et al.  Analytical study on vulnerability functions for casualty estimation in the collapse of adobe buildings induced by earthquake , 2010 .

[13]  Paulo B. Lourenço,et al.  Anisotropic Softening Model for Masonry Plates and Shells , 2000 .

[14]  A. Che,et al.  Seismic Damage Characteristics of Rural Adobe-Wood Building in Gansu Province Induced by the Wenchuan Great Earthquake , 2010 .

[15]  J. Brito,et al.  Seismic resistance of earth construction in Portugal , 2011 .

[16]  E. Leroy Tolles.  Seismic Stabilization of Historic Adobe Structures: Final Report of the Getty Seismic Adobe Project , 2000 .

[17]  Anna Saetta,et al.  Analyses of Masonry Vaults: A Macro Approach based on Three-Dimensional Damage Model , 2002 .

[18]  Jeeho Lee,et al.  Plastic-Damage Model for Cyclic Loading of Concrete Structures , 1998 .

[19]  Ioannis Ioannou,et al.  Overview of the Pathology, Repair and Strengthening of Adobe Structures , 2013 .

[20]  E. Oñate,et al.  A plastic-damage model for concrete , 1989 .

[21]  Junji Kiyono,et al.  Collapse Mechanism of Adobe and Masonry Structures During the 2003 Iran Bam Earthquake , 2004 .

[22]  João Almeida.  Mechanical characterization of traditional adobe masonry elements , 2012 .

[23]  Roberto Scotta,et al.  Coupled environmental-mechanical damage model of RC structures , 1999 .

[24]  D. Kretschmann,et al.  The Mechanical Properties of Wood , 1915 .

[25]  Rogiros Illampas,et al.  Adobe bricks under compression: Experimental investigation and derivation of stress–strain equation , 2014 .

[26]  M. Meyers.  Dynamic Behavior of Materials , 1994 .