Differences Between Samplers for Respirable Dust and the Analysis of Quartz—An International Study

[1]  D. Dahmann,et al.  A comparative field study on dust measurements by different sampling methods with emphasis on estimating factors for recalculation from chinese 'total dust' measurements to respirable dust concentrations. , 2012, The Annals of occupational hygiene.

[2]  Seung Won Kim,et al.  Quartz measurement in coal dust with high-flow rate samplers: laboratory study. , 2012, The Annals of occupational hygiene.

[3]  C. Pretorius.  The effect of size-selective samplers (cyclones) on XRD response , 2011 .

[4]  E. Kauffer,et al.  Validation of the analysis of respirable crystalline silica (quartz) in foams used with CIP 10-R samplers. , 2011, The Annals of occupational hygiene.

[5]  Martin Harper,et al.  Performance of High Flow Rate Samplers for Respirable Particle Collection , 2010, The Annals of occupational hygiene.

[6]  Chantal Dion,et al.  An International comparison of the crystallinity of calibration materials for the analysis of respirable alpha-quartz using X-ray diffraction and a comparison with results from the infrared KBr disc method. , 2009, The Annals of occupational hygiene.

[7]  S. Trakumas,et al.  Parallel particle impactor ? novel size-selective particle sampler for accurate fractioning of inhalable particles , 2009 .

[8]  A. Thorpe,et al.  Comparison of portable, real-time dust monitors sampling actively, with size-selective adaptors, and passively. , 2007, The Annals of occupational hygiene.

[9]  J. Protois,et al.  Comparison of direct (X-ray diffraction and infrared spectrophotometry) and indirect (infrared spectrophotometry) methods for the analysis of alpha-quartz in airborne dusts. , 2005, The Annals of occupational hygiene.

[10]  P. Stacey.  The Performance of Different Analytical Approaches Measuring Respirable Quartz In the Workplace Analysis Scheme for Proficiency (WASP) and the Precision and Limit of Detection of the Direct On-Air-Filter Analysis Methods , 2005 .

[11]  D. Bard,et al.  The performance of laboratories analysing alpha-quartz in the Workplace Analysis Scheme for Proficiency (WASP). , 2003, The Annals of occupational hygiene.

[12]  Jing-Shiang Hwang,et al.  Laboratory Performance Comparison of Respirable Samplers , 1999 .

[13]  Andrew D. Maynard,et al.  A Survey of Wind Speeds in Indoor Workplaces , 1998 .

[14]  M. Gautam,et al.  Performance of a respirable multi-inlet cyclone sampler , 1997 .

[15]  M. Gautam,et al.  Orientation Bias of the Isolated 10-mm Nylon Cyclone at Low Stream Velocity , 1995 .

[16]  Andrew D. Maynard,et al.  Performance assessment of three personal cyclone models, using an Aerodynamic Particle Sizer , 1995 .

[17]  J. Jouret,et al.  A comparison of the performance of samplers for respirable dust in workplaces and laboratory analysis for respirable quartz. , 2013, The Annals of occupational hygiene.

[18]  F. de Vocht,et al.  Application of PUF foam inserts for respirable dust measurements in the brick-manufacturing industry. , 2009, The Annals of occupational hygiene.

[19]  L Kenny,et al.  Applications of low-cost, dual-fraction dust samplers. , 2001, The Annals of occupational hygiene.

[20]  Jean-Francois Fabries,et al.  Study of fifteen respirable aerosol samplers used in occupational hygiene , 2001 .