The role of mixing hydrodynamics on floc growth in unbaffled square stirred-tank reactors for flocculation

[1]  Jun Nan,et al.  Experimental and CFD studies of floc growth dependence on baffle width in square stirred-tank reactors for flocculation , 2018 .

[2]  Qingqing Guan,et al.  Flocculation performance of cationic polyacrylamide with high cationic degree in humic acid synthetic water treatment and effect of kaolin particles , 2017 .

[3]  Y. Watanabe.  Flocculation and me. , 2017, Water research.

[4]  J. Aubin,et al.  Aggregation and breakup of acrylic latex particles inside millimetric scale reactors , 2017 .

[5]  Zhenbei Wang,et al.  Effect of additional polyaluminum chloride and polyacrylamide on the evolution of floc characteristics during floc breakage and re-growth process , 2017 .

[6]  Aimin Li,et al.  A review on chitosan-based flocculants and their applications in water treatment. , 2016, Water research.

[7]  Sin Yin Lee,et al.  Growth and structure of flocs following electrocoagulation , 2016 .

[8]  Pradeep Kumar,et al.  Simultaneous removal of methyl parathion and chlorpyrifos pesticides from model wastewater using coagulation/flocculation: Central composite design , 2016 .

[9]  N. Hilal,et al.  Coagulation/flocculation of lignin aqueous solution in single stage mixing tank system: Modeling and optimization by response surface methodology , 2015 .

[10]  A. Vahedi,et al.  Settling velocities of multifractal flocs formed in chemical coagulation process. , 2014, Water research.

[11]  P. Filip,et al.  Effect of shear rate on aggregate size and structure in the process of aggregation and at steady state , 2013 .

[12]  Jun Nan,et al.  Characteristic analysis on morphological evolution of suspended particles in water during dynamic flocculation process , 2012 .

[13]  Weipeng He,et al.  Characteristic analysis on temporal evolution of floc size and structure in low-shear flow. , 2012, Water research.

[14]  J. Gregory,et al.  The role of mixing conditions on floc growth, breakage and re-growth , 2011 .

[15]  Dongsheng Wang,et al.  Characterization of floc structure and strength: Role of changing shear rates under various coagulation mechanisms , 2011 .

[16]  M. Behr,et al.  Restructuring of colloidal aggregates in shear flows and limitations of the free-draining approximation. , 2009, Journal of colloid and interface science.

[17]  J. Winterwerp,et al.  Shear-induced flocculation of a suspension of kaolinite as function of pH and salt concentration. , 2009, Journal of colloid and interface science.

[18]  John Gregory,et al.  Monitoring particle aggregation processes. , 2009, Advances in colloid and interface science.

[19]  M. Morbidelli,et al.  Effect of shear rate on aggregate size and morphology investigated under turbulent conditions in stirred tank. , 2008, Journal of colloid and interface science.

[20]  Alain Liné,et al.  Analysis of floc size distributions in a mixing tank , 2008 .

[21]  T. Serra,et al.  Efficiency of different shear devices on flocculation. , 2008, Water research.

[22]  A. Rasmuson,et al.  Scale-up behaviour in stirred square flocculation tanks , 2007 .

[23]  A. Rasmuson,et al.  Spatial and temporal evolution of floc size distribution in a stirred square tank investigated using PIV and image analysis , 2006 .

[24]  D. Deglon,et al.  CFD modelling of stirred tanks: Numerical considerations , 2006 .

[25]  Bruce Jefferson,et al.  Floc structural characteristics using conventional coagulation for a high doc, low alkalinity surface water source. , 2006, Water research.

[26]  Alain Liné,et al.  Experimental analysis of floc size distributions in a 1-L jar under different hydrodynamics and physicochemical conditions. , 2005, Journal of colloid and interface science.

[27]  B Jefferson,et al.  A review of floc strength and breakage. , 2005, Water research.

[28]  Francesc Peters,et al.  Experimental analysis of coagulation of particles under low-shear flow. , 2005, Water research.

[29]  M. A. Yukselen,et al.  The reversibility of floc breakage , 2004 .

[30]  D. C. Hopkins,et al.  Characterizing flocculation under heterogeneous turbulence. , 2003, Journal of colloid and interface science.

[31]  B. Krishnappan,et al.  Floc morphology and size distributions of cohesive sediment in steady-state flow. , 2003, Water Research.

[32]  K. Gardner,et al.  Changes in fractal dimension during aggregation. , 2003, Water research.

[33]  A. Cockx,et al.  Experimental Analysis of Floc Size Distribution and Hydrodynamics in a Jar-Test , 2001 .

[34]  C. Selomulya,et al.  Evidence of Shear Rate Dependence on Restructuring and Breakup of Latex Aggregates. , 2001, Journal of colloid and interface science.

[35]  Joseph F. Atkinson,et al.  Characterization of Alum Floc by Image Analysis , 2000 .

[36]  Simon Judd,et al.  Flocculation modelling : A review , 1999 .

[37]  S. Pratsinis,et al.  Effect of shear schedule on particle size, density, and structure during flocculation in stirred tanks , 1998 .

[38]  Stefan Blaser,et al.  Particles under stress , 1998 .

[39]  Serra,et al.  Aggregation and Breakup of Particles in a Shear Flow , 1997, Journal of colloid and interface science.

[40]  Keller,et al.  The Effect of Impeller Type on Floc Size and Structure during Shear-Induced Flocculation , 1996, Journal of colloid and interface science.

[41]  S. Pratsinis,et al.  Shear-induced flocculation: The evolution of floc structure and the shape of the size distribution at steady state , 1996 .

[42]  J. Gregory,et al.  Dependence of floc properties on coagulant type, dosing mode and nature of particles. , 2015, Water research.

[43]  J. Bridgeman,et al.  The development and application of CFD models for water treatment flocculators , 2010, Adv. Eng. Softw..

[44]  M. Vakili,et al.  CFD analysis of turbulence in a baffled stirred tank, a three-compartment model , 2009 .