Impact of Changing Traffic Characteristics and Environmental Conditions on Flexible Pavements

Although the trend for the next generation of pavement design methods is shifting to mechanistic design, the use of design methods based on the AASHO road test results is still the current design practice in Texas and some other states. Critical to these design methods are the AASHTO load equivalency factors (LEFs), which are used to convert the mixed traffic axle loads into standard 18-kip (80.1-kN) equivalent single-axle loads. Several studies have been conducted on the subject of load equivalency for pavement design and analysis. However, there remain uncertainties related to various issues of load equivalency. Over the years, the composition and characteristics of traffic using Texas highways have been changing. The North American Free Trade Agreement has accelerated such changes in that more trucks, primarily moving among mid-western states, Texas, and Mexico, are traveling on Texas highways. In addition, the original AASHO road test was conducted at a site with environmental conditions significantly different from the environmental conditions in Texas. It is therefore critical to understand fully the impact of such changing traffic characteristics and environmental conditions on pavements in Texas. Presented is the methodology used to analyze the impact of these factors on the AASHTO LEFs.

[1]  M Huhtala,et al.  New concepts on load equivalency measurements , 1992 .

[2]  S B Seeds,et al.  EVALUATION OF INCREASED PAVEMENT LOADING. VOLUME II - COMPUTER PROGRAM DOCUMENTATION. FINAL REPORT , 1988 .

[3]  A. Huitson,et al.  Statistical Models in Applied Science. , 1976 .

[4]  Jerry J Hajek.  GENERAL AXLE LOAD EQUIVALENCY FACTORS , 1995 .

[5]  W Kenis,et al.  THE FHWA TEST ROAD: CONSTRUCTION AND INSTRUMENTATION , 1992 .

[6]  R L Lytton,et al.  A system for evaluating the impact of truck characteristics and use on flexible pavement performance and life-cycle costs , 1992 .

[7]  Herbert F. Southgate.  Comparison of rigid pavement thickness design systems , 1988 .

[8]  Sameh Zaghloul,et al.  USE OF THREE-DIMENSIONAL, DYNAMIC, NONLINEAR ANALYSIS TO DEVELOP LOAD EQUIVALENCY FACTORS FOR COMPOSITE PAVEMENTS , 1994 .

[9]  Sameh Zaghloul,et al.  EVALUATION OF HEAVY LOAD DAMAGE EFFECT ON CONCRETE PAVEMENTS USING THREE-DIMENSIONAL, NONLINEAR DYNAMIC ANALYSIS , 1994 .

[10]  Deborah M Freund,et al.  EFFECT OF LOAD, TIRE PRESSURE, AND TIRE TYPE ON FLEXIBLE PAVEMENT RESPONSE , 1988 .

[11]  Lev Khazanovich,et al.  LOAD EQUIVALENCY CONCEPTS: A MECHANISTIC REAPPRAISAL , 1993 .

[12]  Herbert F. Southgate.  AN ANALYTICAL INVESTIGATION OF AASHTO LOAD EQUIVALENCIES , 1993 .

[13]  Peter E. Sebaaly,et al.  EFFECT OF TIRE PARAMETERS ON PAVEMENT DAMAGE AND LOAD-EQUIVALENCY FACTORS , 1992 .

[14]  B G Hutchinson,et al.  LEF ESTIMATION FROM CANROAD PAVEMENT LOAD-DEFLECTION DATA , 1988 .

[15]  N Ali,et al.  Heavy vehicle equivalence factors from in-situ pavement strains , 1990 .

[16]  S B Seeds,et al.  RIGOROUS APPLICATION OF LINEAR DAMAGE CONCEPTS IN DEVELOPMENT OF IMPROVED FLEXIBLE PAVEMENT PERFORMANCE MODELS , 1988 .

[17]  Emile Horak.  APPLICATION OF EQUIVALENT-LAYER-THICKNESS CONCEPT IN A MECHANISTIC REHABILITATION DESIGN PROCEDURE , 1988 .

[18]  R Trapani,et al.  LOAD EQUIVALENCY: ISSUES FOR FURTHER RESEARCH , 1989 .

[19]  B F McCullough,et al.  IMPACT OF TRUCK CHARACTERISTICS ON PAVEMENTS: TRUCK LOAD EQUIVALENCY FACTORS. FINAL REPORT , 1992 .

[20]  M Huhtala,et al.  THE EFFECT OF WIDE-BASED TYRES ON PAVEMENTS , 1992 .

[21]  Donald A. Streit,et al.  HEAVY VEHICLE PAVEMENT LOADING: A COMPREHENSIVE TESTING PROGRAMME , 1992 .

[22]  Anastasios M. Ioannides.  THEORETICAL IMPLICATIONS OF THE AASHTO 1986 NONDESTRUCTIVE TESTING METHOD 2 FOR PAVEMENT EVALUATION , 1991 .