Microstructure and Hardness of Spark Plasma Sintered Inconel 625-NbC Composites for High-Temperature Applications

The study focuses on obtaining Inconel 625-NbC composites for high-temperature applications, e.g., jet engines, waste-to-energy combusting systems or gas engine turbines, and characterizing them in terms of their microstructure and hardness improvement. Synthesis was performed utilizing Spark Plasma Sintering (SPS) at 1150 °C under the load of 45 MPa in medium vacuum (under 10−3 MPa) for a total time of 60 min. Four sets of samples with different Inconel 625 to NbC weight ratios were prepared (5, 10, 20, and 30 wt.%), followed by a reference sample containing no ceramic reinforcement. Obtained materials were hot-rolled at 1150 °C with a 10% reduction step and later cut and polished to perform characterization utilizing scanning electron microscopy (SEM) equipped with energy dispersive spectroscopy (EDS) module and microhardness testing device equipped with Vickers indenter. Hardness was improved proportionally to NbC addition achieving an increase of up to 20% of reference values. Additional heat treatment was conducted on the hot-rolled samples at 1200 °C in an argon atmosphere to further observe the interaction between reinforcement and alloy. Their microstructure revealed the coarsening of precipitates within the metal matrix and partial reinforcement dissolution, which proved to be crucial to obtaining the highest quality composites with homogenous hardness improvement.

[1]  J. Jorge,et al.  Microstructure and corrosion properties of single layer Inconel 625 weld cladding obtained by the electroslag welding process , 2020 .

[2]  H. Ryu,et al.  Kinetic Monte Carlo simulations of the sintering microstructural evolution in density graded stainless steel fabricated by SPS , 2020 .

[3]  M. Qian,et al.  Graphene-strengthened Inconel 625 Alloy Fabricated by Selective Laser Melting , 2020 .

[4]  Naser A. Alsaleh,et al.  Microstructure, wear, and corrosion characterization of high TiC content Inconel 625 matrix composites , 2019, Journal of Materials Research and Technology.

[5]  U. Dabade,et al.  Optimization of process parameters during turning of Inconel 625 , 2019, Materials Today: Proceedings.

[6]  Fan Zhang,et al.  Simulation of TTT Curves for Additively Manufactured Inconel 625 , 2018, Metallurgical and Materials Transactions A.

[7]  J. Lis,et al.  Microstructure of laser cladded carbide reinforced Inconel 625 alloy for turbine blade application , 2017 .

[8]  A. Wilson Formation and effect of topologically close-packed phases in nickel-base superalloys , 2017 .

[9]  P. Poza,et al.  Microscale effect of high-temperature exposition on laser cladded Inconel 625-Cr3C2 metal matrix composite , 2017 .

[10]  D. Gu,et al.  Relation of microstructure, microhardness and underlying thermodynamics in molten pools of laser melting deposition processed TiC/Inconel 625 composites , 2017 .

[11]  Songtao Ban Corrosion Resistance of Inconel 625 Overlay Welded Inside Pipes as a Function of Heat Treatment Temperature , 2016 .

[12]  K. Sairam,et al.  Influence of spark plasma sintering parameters on densification and mechanical properties of boron carbide , 2014 .

[13]  Jianxin Zhang,et al.  Topologically Close-Packed Phase Precipitation in Ni-Based Superalloys , 2011 .

[14]  J. Lippold,et al.  Alloying Additions, Phase Diagrams, and Phase Stability , 2009 .

[15]  J. Mazumder,et al.  Laser aided direct metal deposition of Inconel 625 superalloy: Microstructural evolution and thermal stability , 2009 .

[16]  Chong-yu Wang,et al.  The alloying mechanisms of Re, Ru in the quaternary Ni-based superalloys γ/γ′ interface: A first principles calculation , 2008 .

[17]  C. V. Robino,et al.  Solidification of Nb-bearing superalloys: Part I. Reaction sequences , 1998 .

[18]  S. Shatynski The thermochemistry of transition metal carbides , 1979 .

[19]  A. Sinha Topologically close-packed structures of transition metal alloys , 1972 .