Cracking of the concrete cover due to reinforcement corrosion: A two-dimensional lattice model study

Abstract Corrosion of steel reinforcement is a serious problem for durability and serviceability of reinforced concrete. As the reinforcing steel corrodes, it expands and exerts pressure on the surrounding concrete cover, causing tensile stresses in concrete. This ultimately leads to cracking and spalling of the concrete cover, further exacerbating the durability problems of a structure and increasing the rate of its deterioration. In order to study cracking mechanisms due to reinforcement corrosion, mechanics of the problem was implemented in a two-dimensional lattice model. Heterogeneous nature of concrete was taken into account in the mechanical analysis. Firstly, the case of uniform corrosion was tested, and successfully verified using experimental data from the literature. Also, it was found that cracking pressure is not a deterministic value, and depends on local mechanical parameters. Secondly, two pitting scenarios were tested and compared to the uniform corrosion case. Pitting results in significant reduction of cracking pressure, compared to the uniform corrosion case. Based on the proposed model, some conclusions with implications for engineering practice were drawn.

[1]  Stavroula J. Pantazopoulou,et al.  Modeling Cover-Cracking due to Reinforcement Corrosion in RC Structures , 2001 .

[2]  Tongyan Pan,et al.  Stochastic Modeling of Reinforced Concrete Cracking due to Nonuniform Corrosion: FEM-Based Cross-Scale Analysis , 2012 .

[3]  Koichi Maekawa,et al.  Simulation of Coupled Corrosive Product Formation, Migration into Crack and Propagation in Reinforced Concrete Sections , 2005 .

[4]  J. G. Cabrera,et al.  Deterioration of concrete due to reinforcement steel corrosion , 1996 .

[5]  Minoru Kunieda,et al.  Analysis of crack propagation due to rebar corrosion using RBSM , 2011 .

[6]  Carolyn M. Hansson,et al.  Chloride-induced corrosion products of steel in cracked-concrete subjected to different loading conditions , 2009 .

[7]  John Forbes Olesen,et al.  Monitoring reinforcement corrosion and corrosion-induced cracking using non-destructive x-ray attenuation measurements , 2011 .

[8]  Takafumi Noguchi,et al.  Evaluation of the bond properties between concrete and reinforcement as a function of the degree of reinforcement corrosion , 2002 .

[9]  Dimitri V. Val,et al.  Prediction of cover crack propagation in RC structures caused by corrosion , 2012 .

[10]  C. Andrade,et al.  Factors controlling cracking of concrete affected by reinforcement corrosion , 1998 .

[11]  Bryan T. Adey,et al.  Concrete cover cracking owing to reinforcement corrosion – theoretical considerations and practical experience , 2012 .

[12]  Túlio Nogueira Bittencourt,et al.  Experimental Analysis of Fracture Processes in Concrete , 2001 .

[13]  W. Jin,et al.  On the penetration of corrosion products from reinforcing steel into concrete due to chloride-induced corrosion , 2010 .

[14]  J. Bolander,et al.  Fracture analyses using spring networks with random geometry , 1998 .

[15]  W. Jin,et al.  A study of the elastic moduli of corrosion products using nano-indentation techniques , 2012 .

[16]  Cruz Alonso,et al.  Cover cracking as a function of bar corrosion: Part I-Experimental test , 1993 .

[17]  Luca Bertolini,et al.  Corrosion of Steel in Concrete , 2013 .

[18]  Z. Qian,et al.  3D MODELING OF FRACTURE IN CEMENT-BASED MATERIALS , 2009 .

[19]  Wei Sun,et al.  Modeling of the internal damage of saturated cement paste due to ice crystallization pressure during freezing , 2011 .

[20]  Z. Qian,et al.  Multiscale Modeling of Fracture Processes in Cementitious Materials , 2012 .

[21]  Zdenek P. Bazant,et al.  PHYSICAL MODEL FOR STEEL CORROSION IN CONCRETE SEA STRUCTURES­ THEORY , 1979 .

[22]  E. Schlangen,et al.  Influence of internal dilation on the fracture behaviour of multi-phase materials , 2007 .

[23]  Eric Landis,et al.  Finite element techniques and models for wood fracture mechanics , 2005, Wood Science and Technology.

[24]  W. Jason Weiss,et al.  Interaction between Loading, Corrosion, and Serviceability of Reinforced Concrete , 2000 .

[25]  Raoul François,et al.  Impact of corrosion on mechanical properties of steel embedded in 27-year-old corroded reinforced concrete beams , 2013 .

[26]  C. Anac,et al.  Lattice model implementation on alkali silica reaction gel expansion in a reacted concrete medium , 2012 .

[27]  H.E.J.G. Schlangen,et al.  Experimental and numerical analysis of fracture processes in concrete : proefschrift , 1993 .

[28]  Hans J. Herrmann,et al.  A vectorizable random lattice , 1992 .

[29]  J. Gálvez,et al.  Modelling of corrosion-induced cover cracking in reinforced concrete by an embedded cohesive crack finite element , 2012 .

[30]  P. Grassl,et al.  Lattice modelling of corrosion induced cracking and bond in reinforced concrete , 2011, 1103.4162.

[31]  K. Tuutti.  Corrosion of steel in concrete , 1982 .

[32]  Richard E. Weyers,et al.  MODELING THE TIME-TO-CORROSION CRACKING IN CHLORIDE CONTAMINATED REINFORCED CONCRETE STRUCTURES , 1998 .

[33]  B. Martín‐Pérez.  Service life modelling of R.C. highway structures exposed to chlorides , 1999 .

[34]  Cruz Alonso,et al.  Cover cracking as a function of rebar corrosion: Part 2—Numerical model , 1993 .

[35]  E. Garboczi,et al.  FRACTURE SIMULATIONS OF CONCRETE USING LATTICE MODELS : COMPUTATIONAL ASPECTS , 1997 .

[36]  I Balafas,et al.  Modeling the Structural Effects of Rust in Concrete Cover , 2011 .

[37]  Joško Ožbolt,et al.  Modeling damage in concrete caused by corrosion of reinforcement: coupled 3D FE model , 2012, International Journal of Fracture.

[39]  Byung Hwan Oh,et al.  Effects of non-uniform corrosion on the cracking and service life of reinforced concrete structures , 2010 .

[40]  K. Lundgren,et al.  Modelling the effect of corrosion on bond in reinforced concrete , 2002 .

[41]  Carolyn M. Hansson,et al.  The influence of silica fume on the corrosion resistance of steel in high performance concrete exposed to simulated sea water , 2003 .

[42]  Cruz Alonso,et al.  Comparison of rates of general corrosion and maximum pitting penetration on concrete embedded steel reinforcement , 1995 .