Thermal conductivity studies on ceramic floor tiles

Abstract Thermal diffusivity, thermal conductivity and specific heat of several materials used as floor tiles have been measured using the laser flash method. Natural stones, particularly granite, porcelain stoneware and red stoneware materials of low water absorption, are more effective thermal conductors than white stoneware and vinyl, which have thermal conductivities below 1 W m −1  K −1 . Therefore, last two should not be recommended for radiant floor heating applications. Enhancement of thermal conductivity of red and porcelain stoneware has been achieved by adding Al 2 O 3 of certain characteristics to the ceramic paste. In this way, thermal diffusivity increases of up to 50% have been obtained by adding 20 wt.% of Al 2 O 3 particles.

[1]  S. Bribiesca,et al.  Photoacoustic thermal characterization of electrical porcelains: effect of alumina additions on thermal diffusivity and elastic constants , 1999 .

[2]  S. H Cho,et al.  Predictive control of intermittently operated radiant floor heating systems , 2003 .

[3]  R. Taylor,et al.  Radiation loss in the flash method for thermal diffusivity , 1975 .

[4]  G. Nassetti Technological and productive innovations in the ceramic industry with particular reference to ceramic floor and wall tiles , 1989 .

[5]  Bjarne W. Olesen,et al.  Radiant Floor Heating In Theory and Practice , 2002 .

[6]  J. Amorós,et al.  Microstructural changes during the firing of stoneware floor tiles , 1993 .

[7]  R. Sokolář,et al.  Dry pressed ceramic tiles based on fly ash–clay body: Influence of fly ash granulometry and pentasodium triphosphate addition , 2010 .

[8]  Xu Xu,et al.  Modeling and simulation of under-floor electric heating system with shape-stabilized PCM plates , 2004 .

[9]  E. Sánchez Technical considerations on porcelain tile products and their manufacturing process, Part II , 2003 .

[10]  Xu Xu,et al.  Experimental study of under-floor electric heating system with shape-stabilized PCM plates , 2005 .

[11]  J. Rincón,et al.  Effect of firing temperature on sintering of porcelain stoneware tiles , 2008 .

[12]  José M.F. Ferreira,et al.  Thermal conductivity of highly porous mullite material , 2005 .

[13]  C. Clauser,et al.  Thermal Conductivity of Rocks and Minerals , 2013 .

[14]  W. D. Kingery,et al.  Introduction to Ceramics , 1976 .

[15]  Suat Canbazoğlu,et al.  Unsteady thermal performance analysis of a room with serial and parallel duct radiant floor heating system using hot airflow , 2004 .

[16]  S. Güths,et al.  Evaluation of the thermal comfort of ceramic floor tiles , 2007 .

[17]  A. P. Luz,et al.  Use of glass waste as a raw material in porcelain stoneware tile mixtures , 2007 .

[18]  E. Rambaldi,et al.  Recycling of polishing porcelain stoneware residues in ceramic tiles , 2007 .

[19]  M. Hernández-Crespo,et al.  The use of sewage sludge and marble residues in the manufacture of ceramic tile bodies , 2009 .

[20]  Refrigerating ASHRAE handbook and product directory /published by the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc , 1977 .

[21]  José M.F. Ferreira,et al.  Development of ceramic floor tile compositions based on quartzite and granite sludges , 2007 .

[22]  David S. Smith,et al.  Thermal conductivity and specific heat of kaolinite: Evolution with thermal treatment , 2008 .

[23]  F. Andreola,et al.  Rheological behaviour and mechanical properties of porcelain stoneware bodies containing Italian clay added with bentonites , 2009 .

[24]  Rafael Barea,et al.  Thermal conductivity of Al 2O 3/SiC platelet composites , 2003 .

[25]  M. Hernández-Crespo,et al.  The use of a calcium carbonate residue from the stone industry in manufacturing of ceramic tile bodies. , 2009 .

[26]  Bijan Farhanieh,et al.  A parametric study on radiant floor heating system performance , 2006 .

[27]  C. L. Mantell,et al.  Engineering Materials Handbook , 1958 .

[28]  Á. G. Torre,et al.  Evolution with Temperature of Crystalline and Amorphous Phases in Porcelain Stoneware , 2009 .