Deformation measurement of circular steel plates using projected fringes

Fringe projection is a versatile method for mapping the surface topography. In this paper, it is used to measure the deformation of steel plates under static penetration. Here, the surface shape changes continuously. Therefore, it is important to minimize the registration time. To achieve this, we apply a method of fringe location with subpixel accuracy that requires only a single exposure for each registration. This is in contrast to phase shifting techniques that require at least three separate exposures.

[1]  Giovanna Sansoni,et al.  Fast 3D profilometer based upon the projection of a single fringe pattern and absolute calibration , 2006 .

[2]  Fu-Pen Chiang,et al.  Trapezoidal phase-shifting method for three-dimensional shape measurement , 2005 .

[3]  Dario Ambrosini,et al.  Contouring of artwork surface by fringe projection and FFT analysis , 2000 .

[4]  M. Takeda,et al.  Fourier transform profilometry for the automatic measurement of 3-D object shapes. , 1983, Applied optics.

[5]  Toru Yoshizawa,et al.  Shadow moiré topography by means of the phase-shift method , 1993 .

[6]  Hua Du,et al.  Out-of-plane shape determination in generalized fringe projection profilometry. , 2006, Optics express.

[7]  Fu-Pen Chiang,et al.  Recent advances in fringe projection technique for 3D shape measurement , 1999, Optics & Photonics.

[8]  Chenggen Quan,et al.  Fringe projection profilometry with nonparallel illumination: a least-squares approach. , 2005, Optics letters.

[9]  Gordon M. Brown,et al.  Guest Editorial: Special Section on Optical Methods for Shape Measurement , 2000 .

[10]  Jérôme Molimard,et al.  Uncertainty on fringe projection technique: A Monte-Carlo-based approach , 2013 .

[11]  Jonathan M. Huntley,et al.  Large-scale full-field metrology using projected fringes: some challenges and solutions , 2007, SPIE Optical Metrology.

[12]  Cesar A. Sciammarella,et al.  High-accuracy contouring using projection moiré , 2005 .

[13]  Manuel Servin,et al.  Profilometry by fringe projection , 2003 .

[14]  Kjell G. Robbersmyr,et al.  Projected fringes for the measurement of large aluminum ingots , 2010 .

[15]  Cesar A. Sciammarella,et al.  General model for moiré contouring, part 1: theory , 2008 .

[16]  Seung-Woo Kim,et al.  Phase-shifting projection moire for out-of-plane displacement measurement , 2001, International Conference on Experimental Mechanics.

[17]  David R. Burton,et al.  Full-field Fourier fringe analysis for industrial inspection , 1990, Other Conferences.

[18]  E. Feig,et al.  Narrowband chemical-shift imaging. , 1985, Applied optics.

[19]  Kjell Gunnar Robbersmyr,et al.  Error analysis of a zero-crossing algorithm for fringe location , 1994 .

[20]  G O Rosvold,et al.  Fast measurements of phase using a PC-based frame grabber and phase stepping technique. , 1990, Applied optics.

[21]  Cesar A. Sciammarella,et al.  General model for moiré contouring, part 2: applications , 2008 .

[22]  Mumin Song,et al.  Overview of three-dimensional shape measurement using optical methods , 2000 .

[23]  Hongjian Shi,et al.  Shape and deformation measurement system by combining fringe projection and digital image correlation , 2013 .

[24]  M. Takeda,et al.  Fourier-transform method of fringe-pattern analysis for computer-based topography and interferometry , 1982 .