Perforation resistance of five different high-strength steel plates subjected to small-arms projectiles

Abstract Thin plates of high-strength steel are frequently being used both in civil and military ballistic protection systems. The choice of alloy is then a function of application, ballistic performance, weight and price. In this study the perforation resistance of five different high-strength steels has been determined and compared against each other. The considered alloys are Weldox 500E, Weldox 700E, Hardox 400, Domex Protect 500 and Armox 560T. The yield stress for Armox 560T is about three times the yield stress for Weldox 500E, while the opposite yields for the ductility. To certify the perforation resistance of the various targets, two different ballistic protection classes according to the European norm EN1063 have been considered. These are BR6 (7.62 mm Ball ammunition) and BR7 (7.62 mm AP ammunition), where the impact velocity of the bullet is about 830 m/s in both. Perforation tests have been carried out using adjusted ammunition to determine the ballistic limit of the various steels. In the tests, a target thickness of 6 mm and 6 + 6 = 12 mm was used for protection class BR6 and BR7, respectively. A material test programme was conducted for all steels to calibrate a modified Johnson–Cook constitutive relation and the Cockcroft–Latham fracture criterion, while material data for the bullets mainly were taken from the literature. Finally, results from 2D non-linear FE simulations with detailed models of the bullets are presented and the different findings are compared against each other. As will be shown, good agreement between the FE simulations and experimental data for the AP bullets is in general obtained, while it was difficult to get reliable FE results using the Lagrangian formulation of LS-DYNA for the soft core Ball bullet.

[1]  V. Shuvalov,et al.  The Impact Dynamics , 2011 .

[2]  Jonas A. Zukas,et al.  Impact effects in multilayered plates , 2001 .

[3]  L. Olovsson,et al.  GRALE2D – An Explicit Finite Element Code ForTwo-dimensional Plane And Axi-symmetricMulti-material ALE Simulations , 2005 .

[4]  S. Dey,et al.  The effect of target strength on the perforation of steel plates using three different projectile nose shapes , 2004 .

[5]  Tomasz Wierzbicki,et al.  Journal of Mechanics of Materials and Structures PROTECTION PERFORMANCE OF DOUBLE-LAYERED METAL SHIELDS AGAINST PROJECTILE IMPACT , 2007 .

[6]  B. K. Fink,et al.  Aluminum foam integral armor: a new dimension in armor design , 2001 .

[7]  T. Wierzbicki,et al.  On fracture locus in the equivalent strain and stress triaxiality space , 2004 .

[8]  A. M. Eleiche,et al.  Experimental investigation of the ballistic resistance of steel-fiberglass reinforced polyester laminated plates , 1996 .

[9]  Wing Kam Liu,et al.  Nonlinear Finite Elements for Continua and Structures , 2000 .

[10]  Charles E. Anderson,et al.  Time-Resolved Penetration of B$_{4}$C Tiles by the APM2 Bullet , 2005 .

[11]  S. J. Cimpoeru,et al.  A study of the perforation of aluminium laminate targets , 1998 .

[12]  Tomasz Wierzbicki,et al.  On the transition from adiabatic shear banding to fracture , 2007 .

[13]  T. W. Ipson,et al.  Ballistic Perforation Dynamics , 1963 .

[14]  T. Bogetti,et al.  Ballistic impact into fabric and compliant composite laminates , 2003 .

[15]  Jonas A. Zukas,et al.  High velocity impact dynamics , 1990 .

[16]  G. R. Johnson,et al.  Strain-Rate Effects in Metals at Large Shear Strains , 1983 .

[17]  M. Langseth,et al.  Effect of target thickness in blunt projectile penetration of Weldox 460 E steel plates , 2003 .

[18]  Charles E. Anderson,et al.  Impact of the 7.62-mm APM2 projectile against the edge of a metallic target , 2001 .

[19]  T. Børvik,et al.  A computational model of viscoplasticity and ductile damage for impact and penetration , 2001 .

[20]  Werner Goldsmith,et al.  The mechanics of penetration of projectiles into targets , 1978 .

[21]  R. Mahmudi,et al.  Investigation of stress exponent in the power-law creep of Pb–Sb alloys , 2004 .

[22]  Gabi Ben-Dor,et al.  On the ballistic resistance of multi-layered targets with air gaps , 1998 .

[23]  Tomasz Wierzbicki,et al.  On the ballistic resistance of double-layered steel plates: An experimental and numerical investigation , 2007 .

[24]  Kurt Hacker,et al.  Perforation of Metal Plates : Laboratory Experiments and Numerical Simulations , 2006 .

[25]  Tore Børvik,et al.  On the influence of fracture criterion in projectile impact of steel plates , 2006 .

[26]  A. M. Abd El-Khalek,et al.  Effect of structure transformation on the stress-strain characteristics of Pb-3wt% Sb and Pb-3wt% Sb-1wt% Sn alloys , 2003 .

[27]  D. Agard,et al.  Microtubule nucleation by γ-tubulin complexes , 2011, Nature Reviews Molecular Cell Biology.

[28]  Magnus Langseth,et al.  Perforation of AA5083-H116 aluminium plates with conical-nose steel projectiles : Calculations , 2009 .

[29]  G. G. Corbett,et al.  Impact loading of plates and shells by free-flying projectiles: A review , 1996 .

[30]  Ahmed Benallal,et al.  Flow and fracture characteristics of aluminium alloy AA5083–H116 as function of strain rate, temperature and triaxiality , 2004 .

[31]  Gabi Ben-Dor,et al.  The optimum arrangement of the plates in a multi-layered shield , 2000 .

[32]  Odd Sture Hopperstad,et al.  Perforation of 12 mm thick steel plates by 20 mm diameter projectiles with flat, hemispherical and conical noses: Part II: numerical simulations , 2002 .

[33]  J. D. Embury,et al.  A model of ductile fracture based on the nucleation and growth of voids , 1981 .

[34]  R. Hill.  The mathematical theory of plasticity , 1950 .

[35]  A. Bakker.  Mechanical Behaviour of Materials , 1995 .

[36]  Jian Lu,et al.  A new method to extract the plastic properties of metal materials from an instrumented spherical indentation loading curve , 2004 .

[37]  Ali Nayebi,et al.  New procedure to determine steel mechanical parameters from the spherical indentation technique , 2002 .

[38]  Tore Børvik,et al.  Perforation of 12 mm thick steel plates by 20 mm diameter projectiles with flat, hemispherical and c , 2002 .

[39]  Tore Børvik,et al.  High-temperature tests on aluminium in a split-Hopkinson bar – experimental set-up and numerical predictions , 2006 .

[40]  C. Ruiz,et al.  Impact loading of plates — An experimental investigation , 1983 .

[41]  Werner Goldsmith,et al.  Normal projectile penetration and perforation of layered targets , 1988 .

[42]  Tomasz Wierzbicki,et al.  A Comparative Study on Various Ductile Crack Formation Criteria , 2004 .

[43]  R. David Prengaman,et al.  Wrought lead-calcium-tin alloys for tubular lead/acid battery grids , 1995 .

[44]  M. M. Al-Mousawi.  Material behaviour under high stress and ultrahigh loading rates: edited by J. Mescall and V. Weiss, Plenum Press, New York, 1983. ISBN 0-306-41474-0, x+326 pages, illustrated, hard-cover, US$49.50. , 1986 .