Harmonic Suppression and Torque Ripple Reduction of a High-Speed Permanent Magnet Spindle Motor

In this paper, the method of harmonic suppression and torque ripple reduction is studied for the structure characteristics and design requirements of a high-speed permanent magnet spindle motor. According to the magnetic circuit analysis and calculation theory of the permanent magnet synchronous motor (PMSM), magnetic reluctance slots are arranged at the two ends of the rotor yoke to change the external magnetic field distribution of the permanent magnet in order to optimize the air gap magnetic density waveform. To obtain air gap flux density waveforms that are close to a sinusoidal distribution and not destroy the permanent magnet under the pre-pressure, several reluctance slots with different widths and depths arranged at two ends of the rotor yoke are used to achieve the sinusoidal distribution. Based on the selection of the pole-slot proportion, skewed-slot and a decrease in the end effect, the effects of the harmonic suppression of the harmonic electromotive force (EMF) and the reduction in the torque ripple are discussed. It is concluded that the additional loss and torque ripple of the high-speed permanent magnet spindle motor can be reduced through a reasonable design.

[1]  Heyun Lin,et al.  A Novel 24-Slot/10-Pole Dual Three-Phase Fractional-Slot Overlapped Winding for Low Non-Working Space Harmonics and Stator Modularization , 2020, IEEE Access.

[2]  N. Takorabet,et al.  On the Use of Pulse Width Modulation Method for the Elimination of Flux Density Harmonics in the Air-Gap of Surface PM Motors , 2009, IEEE Transactions on Magnetics.

[3]  Z Q Zhu,et al.  Analytical Modeling and Finite-Element Computation of Radial Vibration Force in Fractional-Slot Permanent-Magnet Brushless Machines , 2010, IEEE Transactions on Industry Applications.

[4]  L Parsa,et al.  Multiobjective Design Optimization of Five-Phase Halbach Array Permanent-Magnet Machine , 2011, IEEE Transactions on Magnetics.

[5]  Sang-Yong Jung,et al.  Cogging Torque Minimization and Torque Ripple Suppression in Surface-Mounted Permanent Magnet Synchronous Machines Using Different Magnet Widths , 2013, IEEE Transactions on Magnetics.

[6]  Shuangxia Niu,et al.  Operation Principle and Torque Component Quantification of Short-Pitched Flux-Bidirectional-Modulation Machine , 2019, IEEE Access.

[7]  Hao Wu,et al.  Regenerative Braking Control Strategy for Electric Vehicles Based on Optimization of Switched Reluctance Generator Drive System , 2020, IEEE Access.

[8]  Wang Tao.  Optimal Design of No-Load Airgap Flux Density of Permanent Magnet Synchronous Motor , 2009 .

[9]  Zhanyang Yu,et al.  Analytical model for magnetic field calculation of SPMSM with chamfered pole considering iron core saturation , 2020, IET Electric Power Applications.

[10]  Ayman M. El-Refaie,et al.  Fractional-Slot Concentrated-Windings Synchronous Permanent Magnet Machines: Opportunities and Challenges , 2010, IEEE Transactions on Industrial Electronics.

[11]  Byung-Il Kwon,et al.  A Magnetic Pole Modulation Method on Surface Permanent Magnet Machines for High Performances With Different Magnetization , 2019, IEEE Access.

[12]  Guijie Yang,et al.  PWM Strategy With Minimum Harmonic Distortion for Dual Three-Phase Permanent-Magnet Synchronous Motor Drives Operating in the Overmodulation Region , 2016, IEEE Transactions on Power Electronics.

[13]  Toto Sugiarto,et al.  Comparison of Three Topologies Rotor to Improve Efficiency and Torque for High-Speed Spindle Motor Applications , 2018, 2018 International Conference on Applied Information Technology and Innovation (ICAITI).

[14]  Xiaoting Ye,et al.  Electromagnetic Performance Analysis on the Bearingless Permanent Magnet Synchronous Motor With Halbach Magnetized Rotor , 2019, IEEE Access.

[15]  S. J. Sung,et al.  Vibration and Noise in a HDD Spindle Motor Arising from the Axial UMF Ripple , 2013, IEEE Transactions on Magnetics.

[16]  Dong Wang,et al.  The Modified Model of Third-Harmonic Shaping for a Surface-Mounted Permanent-Magnet Synchronous Motor Under Parallel Magnetization , 2020, IEEE Transactions on Industry Applications.

[18]  Jian-Xin Shen,et al.  High-speed permanent magnet electrical machines — applications, key issues and challenges , 2018 .

[19]  G. R. Bindu,et al.  A Novel Slotless Halbach-Array Permanent-Magnet Brushless DC Motor for Spacecraft Applications , 2012, IEEE Transactions on Industrial Electronics.

[20]  T. Korakianitis,et al.  Analytical magnetic field distribution of slotless brushless permanent magnet motors – Part 1. Armature reaction field, inductance and rotor eddy current loss calculations , 2012 .

[21]  Changliang Xia,et al.  Modeling and Analyzing of Surface-Mounted Permanent-Magnet Synchronous Machines With Optimized Magnetic Pole Shape , 2014, IEEE Transactions on Magnetics.

[22]  Juan A. Tapia,et al.  Analysis of a Tooth-Coil Winding Permanent-Magnet Synchronous Machine With an Unequal Teeth Width , 2020, IEEE Access.

[23]  Wei Zhang,et al.  Multi-Objective Optimization Design and Analysis of Double-Layer Winding Halbach Fault-Tolerant Motor , 2021, IEEE Access.

[24]  Toni Tuovinen,et al.  Discrete-Time Observer Design for Sensorless Synchronous Motor Drives , 2015, IEEE Transactions on Industry Applications.

[25]  Liang Jia-hong,et al.  Air gap magnetic field analysis of surface-mounted permanent magnet motors , 2011 .

[26]  Michael Galea,et al.  Additive Manufacturing and Testing of a Soft Magnetic Rotor for a Switched Reluctance Motor , 2020, IEEE Access.

[27]  刘光伟,et al.  Electromagnetic Design and Loss Calculations of a 1.12-MW High-Speed Permanent-Magnet Motor for Compressor Applications , 2016 .

[28]  Hae-Joong Kim,et al.  Improved rotor structures for increasing flux per pole of permanent magnet synchronous motor , 2017 .

[29]  Z. Q. Zhu,et al.  Optimal Step-Skew Methods for Cogging Torque Reduction Accounting for Three-Dimensional Effect of Interior Permanent Magnet Machines , 2017, IEEE Transactions on Energy Conversion.

[30]  Jien Ma,et al.  Torque Ripple Reduction of a Salient-Pole Permanent Magnet Synchronous Machine With an Advanced Step-Skewed Rotor Design , 2020, IEEE Access.

[31]  Andrea Cavagnino,et al.  High-Speed Electrical Machines: Technologies, Trends, and Developments , 2014, IEEE Transactions on Industrial Electronics.

[32]  L. Jing,et al.  Analytical Method for Magnetic Field and Electromagnetic Performances in Switched Reluctance Machines , 2019, Journal of Electrical Engineering & Technology.

[33]  E. S. Obe.  Calculation of inductances and torque of an axially laminated synchronous reluctance motor , 2010 .

[34]  M. Aydin,et al.  Development of a 7.5kW High Speed Interior Permanent Magnet Synchronous Spindle Motor for CNC Milling Machine , 2018, 2018 XIII International Conference on Electrical Machines (ICEM).

[36]  Leila Parsa,et al.  Design of Halbach-Array-Based Permanent-Magnet Motors With High Acceleration , 2011, IEEE Transactions on Industrial Electronics.