Microsensor Chip Integrated with Gold Nanoparticles-Modified Ultramicroelectrode Array for Improved Electroanalytical Measurement of Copper Ions

This paper presents a microsensor chip integrated with a gold nanoparticles-modified ultramicroelectrode array (UMEA) as the working electrode for the detection of copper ions in water. The microsensor chip was fabricated with Micro-Electromechanical System technique. Gold nanoparticles were electrodeposited onto the surface of UMEA at a constant potential of −0.3 V. The ratio d/Rb of interelectrode spacing (d) over the individual electrode’s radius (Rb) was investigated to improve the electrochemical performance. The UMEA with a d/Rb of 20 showed the best hemispherical diffusion mode, resulted in fast response time and high current response. The gold nanoparticles increased the active surface area of UMEA by not changing the geometries of UMEA, and the current response was increased further. Incorporating the optimized characteristic of UMEA and gold nanoparticles, the microsensor showed a good linear range from 0.5 to 200 µg L−1 of copper ions in the acetate buffer solutions with the method of square wave stripping voltammetry. Compared with the gold nanoparticles-modified disk electrode, the gold nanoparticles-modified UMEA showed higher sensitivity (0.024 µA mm−2 µg−1 L) and lower limit of detection (0.2 µg L−1). Water samples from river water and tap water were analyzed by the microsensor chip with recovery ranging from 100.7 % to 107.8 %.

[1]  J. Orozco,et al.  Characterization of ultramicroelectrode arrays combining electrochemical techniques and optical microscopy imaging , 2007 .

[2]  Gil-Ho Hwang,et al.  Determination of trace metals by anodic stripping voltammetry using a bismuth-modified carbon nanotube electrode. , 2008, Talanta.

[3]  Ioannis Raptis,et al.  Disposable lithographically fabricated bismuth microelectrode arrays for stripping voltammetric detection of trace metals , 2011 .

[4]  Pascal Salaün,et al.  Voltammetric detection of mercury and copper in seawater using a gold microwire electrode. , 2006, Analytical chemistry.

[5]  B. Jena,et al.  Gold nanoelectrode ensembles for the simultaneous electrochemical detection of ultratrace arsenic, mercury, and copper. , 2008, Analytical chemistry.

[6]  Chong H. Ahn,et al.  A polymer lab chip sensor with microfabricated planar silver electrode for continuous and on-site heavy metal measurement , 2011 .

[7]  Orawon Chailapakul,et al.  Determination of trace heavy metals in herbs by sequential injection analysis-anodic stripping voltammetry using screen-printed carbon nanotubes electrodes. , 2010, Analytica chimica acta.

[8]  Takashi Ito,et al.  Cyclic voltammetry on recessed nanodisk-array electrodes prepared from track-etched polycarbonate membranes with 10-nm diameter pores. , 2010, The Analyst.

[9]  M. B. González-García,et al.  In situ electrochemical generation of gold nanostructured screen-printed carbon electrodes. Application to the detection of lead underpotential deposition , 2009 .

[10]  Nephi A. Zufelt,et al.  Development of a Microelectrode Array Sensing Platform for Combination Electrochemical and Spectrochemical Aqueous Ion Testing. , 2009, Sensors and actuators. B, Chemical.

[11]  J. Orozco,et al.  Underpotential deposition-anodic stripping voltammetric detection of copper at gold nanoparticle-modified ultramicroelectrode arrays. , 2008, Environmental science & technology.

[12]  Jonathan M Cooper,et al.  Optimization of the geometry and porosity of microelectrode arrays for sensor design. , 2002, Analytical chemistry.

[13]  M. Karve,et al.  Invertase inhibition based electrochemical sensor for the detection of heavy metal ions in aqueous system: Application of ultra-microelectrode to enhance sucrose biosensor's sensitivity. , 2008, Biosensors & bioelectronics.

[14]  R. Compton,et al.  Mass Transport to Nanoelectrode Arrays and Limitations of the Diffusion Domain Approach: Theory and Experiment , 2009 .

[15]  Jingming Gong,et al.  Monodispersed Au nanoparticles decorated graphene as an enhanced sensing platform for ultrasensitive stripping voltammetric detection of mercury(II) , 2010 .

[16]  D. Arrigan,et al.  Microelectrochemical Systems on Silicon Chips for the Detection of Pollutants in Seawater , 2011 .

[17]  Arben Merkoçi,et al.  Recent trends in macro-, micro-, and nanomaterial-based tools and strategies for heavy-metal detection. , 2011, Chemical reviews.

[18]  Mianqi Xue,et al.  Facile patterning of reduced graphene oxide film into microelectrode array for highly sensitive sensing. , 2011, Analytical chemistry.

[19]  John Alderman,et al.  Voltammetric characterisation of silicon-based microelectrode arrays and their application to mercury-free stripping voltammetry of copper ions. , 2007, Talanta.

[20]  Mahdiyeh Mehran,et al.  Fabrication of sensitive glutamate biosensor based on vertically aligned CNT nanoelectrode array and investigating the effect of CNTs density on the electrode performance. , 2012, Analytical chemistry.

[21]  S. Prasad,et al.  Biogenic nanoporous silica-based sensor for enhanced electrochemical detection of cardiovascular biomarkers proteins. , 2010, Biosensors & bioelectronics.

[22]  Trevor J. Davies,et al.  The cyclic and linear sweep voltammetry of regular and random arrays of microdisc electrodes: Theory , 2005 .

[23]  Xuan Dai,et al.  Anodic stripping voltammetry of arsenic(III) using gold nanoparticle-modified electrodes. , 2004, Analytical chemistry.

[24]  Christophe Pécheyran,et al.  A novel microelectrode array combining screen-printing and femtosecond laser ablation technologies: Development, characterization and application to cadmium detection , 2009 .