论文信息 - Identification and fault diagnosis of an industrial gas turbine prototype model

Identification and fault diagnosis of an industrial gas turbine prototype model

This paper addresses a model-based procedure exploiting analytical redundancy for the detection and isolation of faults of a power plant. The residual generation is performed by means of output observers and Kalman filters in connection with the uncertainty affecting the measurements acquired from the monitored system. The model of the process under investigation required to design observers and filters is obtained by identification. The proposed fault detection and isolation tool has been tested on a simulated model of an industrial gas turbine prototype.

[1] Paul M. Frank,et al. Fault diagnosis in dynamic systems: theory and application , 1989 .

[2] R. Allen,et al. Statistical Confluence Analysis by means of Complete Regression Systems , 1935 .

[3] Michèle Basseville,et al. Detecting changes in signals and systems - A survey , 1988, Autom..

[4] Jie Chen,et al. Design of unknown input observers and robust fault detection filters , 1996 .

[5] Silvio Simani,et al. Diagnosis techniques for sensor faults of industrial processes , 2000, IEEE Trans. Control. Syst. Technol..

[6] P. Frank,et al. Survey of robust residual generation and evaluation methods in observer-based fault detection systems , 1997 .

[7] Rolf Isermann,et al. Trends in the Application of Model Based Fault Detection and Diagnosis of Technical Processes , 1996 .

[8] Umberto Soverini,et al. The frisch scheme in dynamic system identification , 1990, Autom..

[9] Paul M. Frank,et al. Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy: A survey and some new results , 1990, Autom..