Electrospun CeO2 nanoparticles/PVP nanofibers based high-frequency surface acoustic wave humidity sensor

Abstract Nowadays the working frequencies of surface acoustic wave (SAW) sensors are usually not higher than 500 MHz, typically in the range of a few dozen to hundred megahertz, while an increase of working frequency should be beneficial to the sensor performance. Thus, a high frequency SAW resonator operating at 1.56 GHz was fabricated for relative humidity (RH) detection. The CeO 2 nanoparticles (NPs)/polyvinylpyrrolidone (PVP) nanofibers were prepared by electrospinning of PVP solution with CeO 2 NPs working as the sensitive layer. The inorganic CeO 2 NPs were synthesized previously using a hydrothermal method. In contrast with SAW sensor working at lower resonant frequency (879 MHz), the resonant frequency shift of the sensor based on 1.56 GHz was about −2.5 MHz in the RH range of 11% to 95%, which was approximately 8 times of the former one. Further analysis demonstrated that the additional acoustoelectric loading effect arising from increased electrical conductivity of CeO 2 /PVP nanofibers in high RH improved the frequency response compared with pure PVP nanofibers based SAW sensor. Moreover, the SAW sensor based on inorganic/organic nanohybrid also showed high stability under humid environment and negligible cross-sensitivity effects ensuring further wireless humidity detection.

[1]  Zhen Xu,et al.  Fast Response and High Sensitivity ZnO/glass Surface Acoustic Wave Humidity Sensors Using Graphene Oxide Sensing Layer , 2014, Scientific Reports.

[2]  P. Kirsch,et al.  5GHz surface acoustic wave devices based on aluminum nitride/diamond layered structure realized using electron beam lithography , 2006 .

[3]  Anna Delin,et al.  First-principles study of elastic properties of CeO2, ThO2 and PoO2 , 2006 .

[4]  T. Wang,et al.  Fast humidity sensors based on CeO2 nanowires , 2007 .

[5]  Jay W. Grate,et al.  Surface acoustic wave vapor sensors based on resonator devices , 1991 .

[6]  Tsung-Tsong Wu,et al.  A high sensitivity nanomaterial based SAW humidity sensor , 2008 .

[7]  Shurong Wang,et al.  Organic/inorganic hybrid sensors: A review , 2013 .

[8]  S. Dong,et al.  High sensitivity humidity sensors using flexible surface acoustic wave devices made on nanocrystalline ZnO/polyimide substrates , 2013 .

[9]  M. Penza,et al.  Relative humidity sensing by PVA-coated dual resonator SAW oscillator , 2000 .

[10]  Fernando Calle,et al.  High precision pressure sensors based on SAW devices in the GHz range , 2013 .

[11]  Chenguo Hu,et al.  Synthesis of Ba-doped CeO2 nanowires and their application as humidity sensors , 2007, Nanotechnology.

[12]  Wojtek Wlodarski,et al.  A layered surface acoustic wave gas sensor based on a polyaniline/In2O3 nanofibre composite , 2006 .

[13]  Bin Ding,et al.  A highly sensitive humidity sensor based on a nanofibrous membrane coated quartz crystal microbalance , 2010, Nanotechnology.

[14]  I. A. Hümmelgen,et al.  Preparation and Characterization of Novel Hybrid Materials Formed from (Ti,Sn)O2 Nanoparticles and Polyaniline , 2003 .

[15]  Dinesh K. Aswal,et al.  Ultrasensitive and selective detection of dopamine using cobalt-phthalocyanine nanopillar-based surface acoustic wave sensor. , 2014, ACS applied materials & interfaces.

[16]  Ricardas Rotomskis,et al.  Fast-response surface acoustic wave humidity sensor based on hematoporphyrin film , 2009 .

[17]  Q. Li,et al.  Enhanced sensitivity and stability of room-temperature NH₃ sensors using core-shell CeO₂ nanoparticles@cross-linked PANI with p-n heterojunctions. , 2014, ACS applied materials & interfaces.

[18]  Yang Li,et al.  A novel surface acoustic wave-impedance humidity sensor based on the composite of polyaniline and poly(vinyl alcohol) with a capability of detecting low humidity , 2012 .

[19]  Gwiy-Sang Chung,et al.  High-sensitivity humidity sensors with ZnO nanorods based two-port surface acoustic wave delay line , 2012 .

[20]  K. Mikhelson,et al.  A new equation for the electrical potential of liquid and PVC membranes containing both neutral carriers and ion-exchangers , 1992 .

[21]  M. Cecchini,et al.  Nanoliter-Droplet Acoustic Streaming via Ultra High Frequency Surface Acoustic Waves , 2014, Advanced materials.

[22]  Peng Li,et al.  A surface acoustic wave humidity sensor based on electrosprayed silicon-containing polyelectrolyte , 2010 .

[23]  Xin Wang,et al.  Effect of graphene oxide on the properties of its composite with polyaniline. , 2010, ACS applied materials & interfaces.

[24]  Chen Yuquan,et al.  A surface acoustic wave humidity sensor with high sensitivity based on electrospun MWCNT/Nafion nanofiber films , 2011, Nanotechnology.

[25]  M. Dresselhaus,et al.  Ultrahigh humidity sensitivity of graphene oxide , 2013, Scientific Reports.

[26]  Antonio J. Ricco,et al.  Surface acoustic wave gas sensor based on film conductivity changes , 1985 .

[27]  C. M. Harris.  Seeing SAW potential. , 2003, Analytical chemistry.

[28]  G. Chung,et al.  Controllable growth of oriented ZnO nanorods using Ga-doped seed layers and surface acoustic wave humidity sensor , 2014 .

[29]  Vitalie Stavila,et al.  Ultrasensitive humidity detection using metal-organic framework-coated microsensors. , 2012, Analytical chemistry.

[30]  G. Konstantinidis,et al.  GaN/Si based single SAW resonator temperature sensor operating in the GHz frequency range , 2014 .

[31]  Michael J. Vellekoop,et al.  Design aspects of saw gas sensors , 1986 .

[32]  J.D.N. Cheeke,et al.  SURFACE ACOUSTIC WAVE HUMIDITY SENSOR BASED ON A THIN POLYXIO FILM , 1998 .

[33]  Yang Li,et al.  Highly sensitive and ultrafast response surface acoustic wave humidity sensor based on electrospun polyaniline/poly(vinyl butyral) nanofibers. , 2012, Analytica chimica acta.

[34]  J.D.N. Cheeke,et al.  Acoustic wave gas sensors , 1999 .

[35]  Tian-Ling Ren,et al.  Temperature-Compensated High-Frequency Surface Acoustic Wave Device , 2013, IEEE Electron Device Letters.