Iron loss modelling which includes the impact of punching, applied to high-efficiency induction machines

Within the market evolution towards higher efficiency machines, there is a need for more precise modelling tools, taking also higher frequency power supplies into account. This paper implements the effect of cut edge degradation, due to punching, on the local magnetization curve and local losses, aiming at improved calculation of magnetization current and machine iron losses. For an induction machine, defined by Leroy Somer and a high efficiency electrical steel, selected from ArcelorMittal's range, this study combines advanced material characterization with improved modelling techniques, and is validated by selected machine testing procedures. For the sake of clear loss separation a machine with slotless rotor was characterized at two conditions regarding speed and excitation. The loss model, including already the effect of rotational losses and higher harmonics, was enhanced with the punching effect, which led to a model accuracy of 86% at synchronous speed when compared to the measured losses. This study also led to further insights in local magnetization behaviour, to be used in further design optimization.

[1]  N. Derebasi,et al.  Mathematical model for cutting effect on magnetic flux distribution near the cut edge of non-oriented electrical steels , 2008 .

[2]  Lode Vandenbossche,et al.  An innovative approach for the evaluation of iron losses in magnetic laminations, applied to the optimization of highly saturated electric motors , 2012 .

[3]  Anthony John Moses,et al.  Aspects of the cut-edge effect stress on the power loss and flux density distribution in electrical steel sheets , 2000 .

[4]  C. Marchand,et al.  Analytical computation of stator iron losses in interior permanent-magnet synchronous machine , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[5]  F. Fiorillo,et al.  An improved approach to power losses in magnetic laminations under nonsinusoidal induction waveform , 1990 .

[6]  Gorazd Štumberger,et al.  Accuracy of iron loss calculation in electrical machines by using different iron loss models , 2003 .

[7]  J. Corda,et al.  Modelling and prediction of iron loss with complex flux waveforms , 2005 .

[8]  T. Nakata,et al.  Effects of stress due to cutting on magnetic characteristics of silicon steel. , 1991 .

[9]  Kais Atallah,et al.  The calculation of iron losses in brushless permanent magnet dc motors , 1994 .

[10]  L. Vandenbossche,et al.  Improved iron loss modelling approach for advanced electrical steels operating at high frequencies and high inductions in automotive machines , 2012, 2012 2nd International Electric Drives Production Conference (EDPC).

[11]  G. Bertotti.  General properties of power losses in soft ferromagnetic materials , 1988 .

[12]  Andreas Krings,et al.  Overview and Comparison of Iron Loss Models for Electrical Machines , 2010 .

[13]  G. Crevecoeur,et al.  Analysis of the Local Material Degradation Near Cutting Edges of Electrical Steel Sheets , 2008, IEEE Transactions on Magnetics.

[14]  J. Soulard,et al.  Incorporating Lamination Processing and Component Manufacturing in Electrical Machine Design Tools , 2007, 2007 IEEE Industry Applications Annual Meeting.

[15]  Andrea Cavagnino,et al.  Predicting iron losses in soft magnetic materials with arbitrary voltage supply: an engineering approach , 2003 .

[16]  R. Billardon,et al.  Effect of punching on electrical steels: Experimental and numerical coupled analysis , 2000 .

[17]  Kazuo Okamura,et al.  Estimation model for magnetic properties of stamped electrical steel sheet , 2013 .

[18]  E. Lamprecht,et al.  Investigations of eddy current losses in laminated cores due to the impact of various stacking processes , 2012, 2012 2nd International Electric Drives Production Conference (EDPC).

[19]  F. Henrotte,et al.  Impact of cut edges on magnetization curves and iron losses in e-machines for automotive traction , 2010 .