Thin film composite membranes with modified polysulfone supports for organic solvent nanofiltration

New compositions of sulfone polymer family, namely, sulfonated poly(ether sulfide sulfone) (SPESS) based on three different diphenols such as 1,1′-Thiobis(2-naphthol) (TBN), 2,2′-thiobis(4-methyl phenol) (TBMP) and curcumin (CUR) were synthesized via aromatic nucleophilic substitution copolymerization and used for enrichment of polysulfone (PSf) support in organic solvent nanofiltration. The bulk modification of PSf support was manipulated through blending with novel copolymers. Solvent resistant thin-film composite nanofiltration (TFC-SRNF) membranes were prepared on the reinforced PSf support by in situ interfacial polymerization with poly(ethyleneimine) and iso-phthaloyl dichloride. Chemical structure, morphology and physicochemical properties of the synthesized copolymers and the resultant membranes were characterized. The solubility of SPESS copolymers as an effective factor in membrane formation via phase inversion was evaluated in highly and moderate polar solvents. Their good solubility was attributed to the presence of flexible linkages and different functional groups. Furthermore, two conceptual models were presented into two different issues: (i) the mechanism of PSf bulk modification through blending with bulky SPESS copolymers and (ii) the surface property effects of the modified PSf support on the adhesion of polyamide thin film. In order to evaluate the swelling effect and organic–organic separation performance of TFC-SRNF membranes, two dyes with identical molecular size but different charges dissolved in methanol were selected. It was found that the employing SPESS reduced swelling degree significantly and consequently improved TFC-SRNF membrane performance.

[1]  Li-ping Zhu,et al.  Polysulfone-based amphiphilic polymer for hydrophilicity and fouling-resistant modification of polyethersulfone membranes , 2010 .

[2]  C. A. Smolders,et al.  Gas separation properties of a thermally stable and chemically resistant polytriazole membrane , 1989 .

[3]  G. Tanny,et al.  Ionic heterogeneities in sulfonated polysulfone films , 1983 .

[4]  B. Van der Bruggen,et al.  Chemical modification of polyethersulfone nanofiltration membranes: A review , 2009 .

[5]  E. Drioli,et al.  Characteristics and performance of new nanoporous PEEKWC films , 2008 .

[6]  S. Mehdipour‐Ataei,et al.  Soluble and thermally stable polyamides bearing 1,1' -thiobis (2 -naphthoxy) groups , 2007 .

[7]  S. Mehdipour‐Ataei,et al.  New poly(ester amide ether amide)s from a novel flexible diamine and different diacid chlorides using TMSCl for in situ silylation , 2005 .

[8]  Suobo Zhang,et al.  Novel thin-film composite membranes with improved water flux from sulfonated cardo poly(arylene ether sulfone) bearing pendant amino groups , 2008 .

[9]  Li-ping Zhu,et al.  Corona-induced graft polymerization for surface modification of porous polyethersulfone membranes , 2007 .

[10]  Sundergopal Sridhar,et al.  Separation of organic–organic mixtures by pervaporation—a review , 2004 .

[11]  M. Jahanshahi,et al.  Interlaboratory studies of highly permeable thin‐film composite polyamide nanofiltration membrane , 2012 .

[12]  J. Mcgrath,et al.  Synthesis and characterization of 3,3′‐disulfonated‐4,4′‐dichlorodiphenyl sulfone (SDCDPS) monomer for proton exchange membranes (PEM) in fuel cell applications , 2006 .

[13]  Kamalesh K. Sirkar,et al.  Interfacially polymerized hydrophilic microporous thin film composite membranes on porous polypropylene hollow fibers and flat films , 2006 .

[14]  E. Abouzari‐Lotf,et al.  Heat-resistant and soluble fluorinated poly(amide imide)s based on non-coplanar ortho-linked diimide-dicarboxylic acid , 2011 .

[15]  Lieven E. M. Gevers,et al.  Optimisation of a lab-scale method for preparation of composite membranes with a filled dense top-layer , 2006 .

[16]  A. Livingston,et al.  Membrane characterisation by SEM, TEM and ESEM: The implications of dry and wetted microstructure on mass transfer through integrally skinned polyimide nanofiltration membranes , 2009 .

[17]  S. Mehdipour‐Ataei,et al.  Poly(sulfone ether amide amide)s as a new generation of soluble, thermally stable polymers , 2005 .

[18]  M. Jahanshahi,et al.  DEVELOPING THIN FILM COMPOSITE POLY(PIPERAZINE-AMIDE) AND POLY(VINYL-ALCOHOL) NANOFILTRATION MEMBRANES , 2010 .

[19]  Lloyd S. White,et al.  Transport properties of a polyimide solvent resistant nanofiltration membrane , 2002 .

[20]  V. Abetz,et al.  Asymmetric superstructure formed in a block copolymer via phase separation. , 2007, Nature materials.

[21]  P. Jacobs,et al.  Preparation parameters influencing the performance of SRNF membranes cast from polyimide solutions via SEPPI , 2009 .

[22]  C. Wright,et al.  Positively charged nanofiltration membranes: review of current fabrication methods and introduction of a novel approach. , 2011, Advances in colloid and interface science.

[23]  A. Livingston,et al.  Polymeric membranes for nanofiltration in polar aprotic solvents , 2007 .

[24]  J. Degrève,et al.  Novel polyphenylsulfone membrane for potential use in solvent nanofiltration , 2011 .

[25]  T. A. Hatton,et al.  Novel thin-film composite nanofiltration hollow fiber membranes with double repulsion for effective removal of emerging organic matters from water , 2012 .

[26]  Pieter Vandezande,et al.  Solvent resistant nanofiltration: separating on a molecular level. , 2008, Chemical Society reviews.

[27]  Michael A. Hickner,et al.  Direct polymerization of sulfonated poly(arylene ether sulfone) random (statistical) copolymers: candidates for new proton exchange membranes , 2002 .

[28]  Xiaojing Yang,et al.  Experimental observations of nanofiltration with organic solvents , 2001 .

[29]  Kang Li,et al.  Nanoporous asymmetric polyaniline films for filtration of organic solvents , 2009 .

[30]  Matthias Wessling,et al.  Insight into the transport of hexane-solute systems through tailor-made composite membranes , 2004 .

[31]  E. Drioli,et al.  Polymeric membranes modified via plasma for nanofiltration of aqueous solution containing organic compounds , 2009 .

[32]  Sayed Siavash Madaeni,et al.  Synthesis of a novel poly(amide-imide) (PAI) and preparation and characterization of PAI blended polyethersulfone (PES) membranes , 2008 .

[33]  P. Hadi,et al.  Study on the synthesis of poly(ether‐block‐amide) copolymer based on nylon6 and poly(ethylene oxide) with various block lengths , 2010 .

[34]  Masakoto Kanezashi,et al.  Controlled synthesis of high performance polyamide membrane with thin dense layer for water desalination , 2010 .

[35]  A. Rahimpour,et al.  The effect of anionic, non-ionic and cationic surfactants on morphology and performance of polyethersulfone ultrafiltration membranes for milk concentration , 2007 .

[36]  Z. Su,et al.  Effects of polymerization conditions on hydrophilic groups in aromatic polyamide thin films , 2009 .

[37]  W. Gump,et al.  2-Hydroxyphenyl Sulfoxides and 2-Hydroxyphenyl Sulfones , 1945 .

[38]  Marcel Mulder,et al.  Basic Principles of Membrane Technology , 1991 .

[39]  E. S. Tarleton,et al.  Solvent flux through dense polymeric nanofiltration membranes , 2004 .

[40]  Yan Wang,et al.  Molecular design of thin film composite (TFC) hollow fiber membranes for isopropanol dehydration via pervaporation , 2012 .

[41]  S. Smiles,et al.  CCXXXVI.—Aromatic hydroxy-sulphoxides , 1910 .

[42]  Kamalesh K. Sirkar,et al.  Interfacially polymerized thin film composite membranes on microporous polypropylene supports for solvent-resistant nanofiltration , 2008 .

[43]  A. Rahimpour,et al.  Nano-porous polyethersulfone (PES) membranes modified by acrylic acid (AA) and 2-hydroxyethylmethacr , 2010 .

[44]  Qing-rui Wang,et al.  Poly(vinylidene fluoride)/polyethersulfone blend membranes: Effects of solvent sort, polyethersulfone and polyvinylpyrrolidone concentration on their properties and morphology , 2006 .