Experimental and Numerical Study of a Usual Brick Filled with PCM to Improve the Thermal Inertia of Buildings

Abstract The integration of a PCM layer into an external building wall diminished the amplitude of the instantaneous heat flux through the wall. The types of PCM, its location in the wall and its amount, have been studied in this paper. A two-dimensional transient heat transfer model has been developed and solved numerically using the commercial Computational Fluid Dynamics (CFD) package Fluent. The numerical results have been verified and validated with an experimental model. The considered model consists of usual brick with square holes used as construction materials for residential buildings in Algeria, some of these square holes are filled with PCM. The results showed that the PCM introduced in square holes can improves considerably the thermal inertia of brick and a combination of the types of PCM, its location in the wall and its amount, is very important for improve reduction of heat gain before it reaches the indoor space.

[1]  H. Brouwers,et al.  Experimental research on the use of micro-encapsulated Phase Change Materials to store solar energy in concrete floors and to save energy in Dutch houses , 2011 .

[2]  A. Stambouli.  Promotion of renewable energies in Algeria: Strategies and perspectives , 2011 .

[3]  Esam M. Alawadhi,et al.  Thermal analysis of a building brick containing phase change material , 2008 .

[4]  R. Velraj,et al.  Heat transfer and pressure drop studies on a PCM-heat exchanger module for free cooling applications , 2011 .

[5]  Liang Fang,et al.  Optimization of concrete hollow brick using hybrid genetic algorithm combining with artificial neural networks , 2010 .

[6]  Francis Agyenim,et al.  A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS) , 2010 .

[7]  Y. Çengel.  Heat Transfer: A Practical Approach , 1997 .

[8]  Liang Fang,et al.  Numerical simulation of concrete hollow bricks by the finite volume method , 2009 .

[9]  Lei Li,et al.  Numerical thermal optimization of the configuration of multi-holed clay bricks used for constructing building walls by the finite volume method , 2008 .

[10]  Ammar Bouchair,et al.  Steady state theoretical model of fired clay hollow bricks for enhanced external wall thermal insulation , 2008 .

[11]  F. Nicol.  Adaptive thermal comfort standards in the hot–humid tropics , 2004 .

[12]  Miroslaw Zukowski,et al.  Mathematical modeling and numerical simulation of a short term thermal energy storage system using phase change material for heating applications , 2007 .

[13]  Michael A. Humphreys,et al.  ADAPTIVE THERMAL COMFORT AND SUSTAINABLE THERMAL STANDARDS FOR BUILDINGS , 2002 .

[14]  Chengbin Zhang,et al.  Thermal response of brick wall filled with phase change materials (PCM) under fluctuating outdoor te , 2011 .

[15]  Gennady Ziskind,et al.  Numerical and experimental study of melting in a spherical shell , 2007 .

[16]  Salmaan Craig,et al.  Tests of prototype PCM ‘sails’ for office cooling , 2011 .

[17]  S. D. Sharma,et al.  Accelerated thermal cycle test of acetamide, stearic acid and paraffin wax for solar thermal latent heat storage applications , 2002 .