A finite element modelling methodology for the non-linear stiffness evaluation of adhesively bonded single lap-joints

A new modelling methodology is presented that enables the stiffness of adhesively bonded single lap-joints to be included in the finite element analysis of whole vehicle bodies. This work was driven by the need to significantly reduce computing resources for vehicle analysis. To achieve this goal the adhesive bond line and adherends are modelled by a relatively 'small' number of shell elements to replace the usual solid element mesh for a reliable analysis. Previous work in Part 1 has provided the necessary background information to develop and verify the new finite element analysis that reduces the solution runtime by a factor of 1000. Although a joint's non-linear stiffness is reliably simulated to failure load, it is recognised by the authors that the coarse shell mesh cannot provide accurate peak stresses or peak strains for the successful application of a numerical failure criterion. Given that the new modelling methodology is very quick to apply to existing shell models of vehicle bodies, it is recommended for use by the stress analyst who requires, say at the preliminary design stage, whole vehicle stiffness performance in a significantly reduced timeframe.

[1]  Jan K. Spelt,et al.  Effect of adhesive thickness on fatigue and fracture of toughened epoxy joints – Part II: Analysis and finite element modeling , 2011 .

[2]  D. Wagner.  FEA (FINITE ELEMENT ANALYSIS) MODELING FOR BODY-IN-WHITE ADHESIVES , 1996 .

[3]  Robert D. Adams,et al.  Experimental and numerical analysis of single-lap joints for the automotive industry , 2009 .

[4]  Raul H. Andruet,et al.  Two- and three-dimensional geometrical nonlinear finite elements for analysis of adhesive joints , 2001 .

[5]  Robert D. Adams,et al.  The influence of local geometry on the strength of adhesive joints , 1987 .

[6]  Ramazan Kahraman,et al.  Influence of adhesive thickness and filler content on the mechanical performance of aluminum single-lap joints bonded with aluminum powder filled epoxy adhesive , 2008 .

[7]  J. G. Williams,et al.  The influence of bond line thickness and peel arm thickness on adhesive fracture toughness of rubber toughened epoxy-aluminium alloy laminates , 2008 .

[8]  A model of an adhesively bonded joint with elastic–plastic adherends and a softening adhesive , 2009 .

[9]  J. Toby Mottram,et al.  Using Finite Elements in Mechanical Design , 1996 .

[10]  D. J. Meadows,et al.  The Development of a Joint Design Approach for Aluminium Automotive Structures , 1992 .

[11]  Odd Sture Hopperstad,et al.  Evaluation of a finite element modelling approach for welded aluminium structures , 2006 .

[12]  Young-Pil Park,et al.  DEVELOPMENT OF AN AUTOMOTIVE JOINT MODEL USING AN ANALYTICALLY BASED FORMULATION , 1999 .

[13]  P.M.S.T. de Castro,et al.  A three-dimensional finite element model for stress analysis of adhesive joints , 2002 .

[14]  Eugenio Dragoni,et al.  Standard finite element techniques for efficient stress analysis of adhesive joints , 2009 .

[15]  A. D. Crocombe,et al.  A comparison of two- and three-dimensional finite element analyses of adhesive joints , 1993 .

[16]  Ulf Edlund,et al.  Surface adhesive joint description with coupled elastic-plastic damage behaviour and numerical applications , 1994 .

[17]  M. Hammouda,et al.  Fatigue crack growth in double cantilever beam specimen with an adhesive layer , 1998 .

[18]  Hans Van Oosterwyck,et al.  Influence of joint component mechanical properties and adhesive layer thickness on stress distribution in micro-tensile bond strength specimens. , 2009, Dental materials : official publication of the Academy of Dental Materials.

[19]  W. Bascom,et al.  The fracture of epoxy- and elastomer-modified epoxy polymers in bulk and as adhesives , 1975 .

[20]  Gang Li,et al.  Nonlinear finite element analysis of stress and strain distributions across the adhesive thickness in composite single-lap joints , 1999 .

[21]  Michael D. Gilchrist,et al.  Development of cohesive fatigue cracks in T-peel joints , 1993 .

[22]  Massimo Rossetto,et al.  Stress intensity factor in bonded joints: influence of the geometry , 2010 .

[23]  A. D. Crocombe,et al.  Analysing structural adhesive joints for failure , 1990 .

[24]  Lucas F. M. da Silva,et al.  Effect of material, geometry, surface treatment and environment on the shear strength of single lap joints , 2009 .

[25]  William C. Carpenter,et al.  Two Finite Elements for Modeling the Adhesive in Bonded Configurations , 1989 .

[26]  Andrea Spaggiari,et al.  Efficient Post-elastic Analysis of Bonded Joints by Standard Finite Element Techniques , 2009 .

[27]  N. Johnson,et al.  Effect of Bondline Thickness on Mixed-Mode Debonding of Adhesive Joints to Electroprimed Steel Surfaces , 1990 .

[28]  J. Toby Mottram,et al.  A finite element modelling methodology for the non-linear stiffness evaluation of adhesively bonded single lap-joints: Part 1. Evaluation of key parameters , 2012 .