Polarization-OTDR-based optical fibre sensor for plasma current measurement in ITER: effect of fibre bending, twisting and temperature dependence of Verdet constant on the measurement accuracy

In ITER, polarimetric optical fibre sensors measure the plasma current (0-17 MA) by exploiting the Faraday effect induced state of polarisation (SOP) rotation of a polarised light propagating in the sensing fibre, placed on the outer surface of the ITER vacuum vessel (VV) section. In the discussed here system, the polarisation-OTDR (POTDR) is employed to analyse the SOP rotation and a spun fibre is used as the sensing fibre. The Verdet constant is the proportionality constant between the SOP rotation and the axial magnetic field induced by the current. The presence of unwanted birefringence in the sensing fibre will degrade the measurement accuracy. In this paper, we analyse the effect of the birefringence induced by the fibre bending and twisting together with the effect of the temperature dependence of the Verdet constant. Due to the difficulty in taking measurements in the ITER representative conditions, a simulation approach is developed—using Jones formalism—to show that the performance of the sensing fibre in terms of plasma current measurement can be characterised by the ratio of precursor fibre linear beat length (LB) over its spun period (SP) i.e., LB . Finally, we estimate the minimum required LB/SP ratio of the sensing fibre needed to satisfy the ITER plasma current measurement specifications.

[1]  D. B. Brace.  XLII. The observation of the resolution of light into its circular components in the faraday “effect” , 1901 .

[2]  R. Jones.  A New Calculus for the Treatment of Optical SystemsI. Description and Discussion of the Calculus , 1941 .

[3]  R. Clark Jones,et al.  A New Calculus for the Treatment of Optical Systems. VII. Properties of the N-Matrices , 1948 .

[4]  D. Keck,et al.  Birefringence in dielectric optical waveguides , 1972 .

[5]  A. J. Rogers,et al.  Optical Measurement of Current and Voltage on Power Systems , 1979 .

[6]  S. C. Rashleigh,et al.  Magneto‐optic current sensing with birefringent fibers , 1979 .

[7]  R. Ulrich,et al.  Polarization optics of twisted single-mode fibers. , 1979, Applied optics.

[8]  A. Rogers.  Polarisation optical time domain reflectometry , 1980 .

[9]  A. Smith,et al.  Birefringence induced by bends and twists in single-mode optical fiber. , 1980, Applied optics.

[10]  S. Rashleigh,et al.  Bending-induced birefringence in single-mode fibers. , 1980, Optics letters.

[11]  David N. Payne,et al.  Production of single-mode fibres with negligible intrinsic birefringence and polarisation mode dispersion , 1981 .

[12]  D N Payne,et al.  Birefringence and polarization mode-dispersion in spun single-mode fibers. , 1981, Applied Optics.

[13]  D. Payne,et al.  Anisotropy in spun single-mode fibres , 1982 .

[14]  T. Kimura,et al.  Polarization behavior in multiply perturbed single-mode fibers , 1982, IEEE Journal of Quantum Electronics.

[15]  S. Rashleigh.  Origins and control of polarization effects in single-mode fibers (A) , 1982 .

[16]  D. Payne,et al.  Development of Low- and High-Birefringence Optical Fibers , 1982 .

[17]  David N. Payne,et al.  Current sensors using highly birefringent bow-tie fibres , 1986 .

[18]  D. Payne,et al.  Miniature multi-turn fibre current sensors , 1987 .

[19]  Z. Ren,et al.  Temperature dependence of bend- and twist-induced birefringence in a low-birefringence fiber. , 1988, Optics letters.

[20]  David N. Payne,et al.  Electric current sensors employing spun highly birefringent optical fibers , 1989 .

[21]  M. Deeter,et al.  Temperature dependence of the Verdet constant in several diamagnetic glasses. , 1991, Applied optics.

[22]  M. Andrés,et al.  Faraday effect in standard optical fibers: dispersion of the effective Verdet constant. , 1996, Applied optics.

[23]  G. Day,et al.  Twisting and annealing optical fiber for current sensors , 1996 .

[24]  Tomasz R. Wolinski,et al.  I Polarimetric optical fibers and sensors , 2000 .

[25]  Marc Wuilpart,et al.  Faraday effect based optical fiber current sensor for tokamaks , 2011, 2011 2nd International Conference on Advancements in Nuclear Instrumentation, Measurement Methods and their Applications.

[26]  Marc Wuilpart,et al.  Development of a Jones vector based model for the measurement of a plasma current in a thermonuclear fusion reactor with a POTDR setup , 2012, Photonics Europe.

[27]  Marc Wuilpart,et al.  Influence of the optical fiber type on the performances of fiber-optics current sensor dedicated to plasma current measurement in ITER. , 2015, Applied optics.

[28]  Marc Wuilpart,et al.  Study of a fibre optics current sensor for the measurement of plasma current in ITER , 2016, European Workshop on Optical Fibre Sensors.

[29]  Marc Wuilpart,et al.  Plasma Current Measurement in Thermonuclear Fusion Reactors Using a Photon-Counting POTDR , 2017, IEEE Photonics Technology Letters.

[30]  Bok Hyeon Kim,et al.  Temperature and Vibration Dependence of the Faraday Effect of Gd2O3 NPs-Doped Alumino-Silicate Glass Optical Fiber , 2018, Sensors.

[31]  Marc Wuilpart,et al.  Status and future developments of R&D on fiber optics current sensor for ITER , 2018, Fusion Engineering and Design.

[32]  S. Balaji.  Magnetostatics , 2020, Electromagnetics Made Easy.

[33]  P. Moreau,et al.  Effect of optical fibre bending on plasma current measurement in ITER using a polarisation-OTDR setup , 2021 .