Evolutionary structural optimization for stress minimization problems by discrete thickness design

Abstract Stress minimization is a major aspect of structural optimization in a wide range of engineering designs. This paper presents a new evolutionary criterion for the problems of variable thickness design whilst minimizing the maximum stress in a structure. On the basis of finite element analysis, a stress sensitivity number is derived to estimate the stress change in an element due to varying the thickness of other elements. Following the evolutionary optimization procedure, an optimal design with a minimum maximum stress is achieved by gradually removing material from those elements, which have the lowest stress sensitivity number or adding material onto those elements, which have the highest stress sensitivity number. The numerical examples presented in this paper demonstrate the capacity of the proposed method for solving stress minimization problems. The results based on the stress criterion are compared with traditional ones based on a stiffness criterion, and an optimization scheme based on the combination of both the stress minimization and the stiffness maximization criteria is presented.

[1]  Yeh-Liang Hsu,et al.  The curvature function method for two-dimensional shape optimization under stress constraints , 1995 .

[2]  G. I. N. Rozvany,et al.  Difficulties in truss topology optimization with stress, local buckling and system stability constraints , 1996 .

[3]  E. Hinton,et al.  Fully stressed topological design of structures using an evolutionary procedure , 1995 .

[4]  Y. Xie,et al.  A simple evolutionary procedure for structural optimization , 1993 .

[5]  Ichiro Hagiwara,et al.  Optimal rectangular plate and shallow shell topologies using thickness distribution or homogenization , 1994 .

[6]  Raphael T. Haftka,et al.  A comparison of optimality criteria methods for stress and displacement constraints , 1994 .

[7]  George I. N. Rozvany,et al.  Structural Design via Optimality Criteria: The Prager Approach to Structural Optimization , 1989 .

[8]  Gengdong Cheng,et al.  STUDY ON TOPOLOGY OPTIMIZATION WITH STRESS CONSTRAINTS , 1992 .

[9]  Grant P. Steven,et al.  Displacement minimization of thermoelastic structures by evolutionary thickness design , 1999 .

[10]  Yunliang Ding,et al.  Shape optimization of structures: a literature survey , 1986 .

[11]  G. Rozvany.  Exact analytical solutions for some popular benchmark problems in topology optimization , 1998 .

[12]  Y. Xie,et al.  Evolutionary structural optimization for problems with stiffness constraints , 1996 .

[13]  M. Bendsøe,et al.  Topology optimization of continuum structures with local stress constraints , 1998 .

[14]  Grant P. Steven,et al.  Evolutionary shape optimization for stress minimization , 1999 .

[15]  Grant P. Steven,et al.  A generalized evolutionary method for numerical topology optimization of structures under static loading conditions , 1998 .

[16]  Yi Min Xie,et al.  Evolutionary Structural Optimization , 1997 .

[17]  G. Rozvany,et al.  Generalized Michell structures — exact least-weight truss layouts for combined stress and displacement constraints: Part I — General theory for plane trusses , 1995 .

[18]  George I. N. Rozvany,et al.  Layout Optimization of Structures , 1995 .

[19]  R. Haftka,et al.  Elements of Structural Optimization , 1984 .

[20]  Grant P. Steven,et al.  On equivalence between stress criterion and stiffness criterion in evolutionary structural optimization , 1999 .

[21]  Souran Manoochehri,et al.  A hybrid deterministic/stochastic optimization approach for the shape configuration design of structures , 1999 .

[22]  Souran Manoochehri,et al.  GENERATING OPTIMAL CONFIGURATIONS IN STRUCTURAL DESIGN USING SIMULATED ANNEALING , 1997 .

[23]  Grant P. Steven,et al.  An evolutionary structural optimization method for sizing problems with discrete design variables , 1998 .

[24]  J. J. McKeown,et al.  A NOTE ON THE EQUIVALENCE BETWEEN MAXIMUM STIFFNESS AND MAXIMUM STRENGTH TRUSSES , 1997 .

[25]  Erik Steen Kristensen,et al.  On the optimum shape of fillets in plates subjected to multiple in‐plane loading cases , 1976 .

[26]  Martin P. Bendsøe,et al.  Optimization of Structural Topology, Shape, And Material , 1995 .

[27]  Claus Mattheck,et al.  Design in Nature: Learning from Trees , 1998 .

[28]  Paull Pedersen,et al.  Design for Minimum Stress Concentration by Finite Elements and Linear Programming , 1982 .

[29]  Ren-Jye Yang,et al.  Stress-based topology optimization , 1996 .