Characterising the composition of waste-derived fuels using a novel image analysis tool.

An experimental study was completed using a previously developed and innovative image analysis approach, which has been applied here to shredded waste materials representative of waste-derived fuels. Waste components were collected from source-segregated recycling containers and shredded to <150 mm. These materials were then used to produce 3× samples of different composition. The samples were spread to represent materials on a conveyor belt, and multiple images of each sample were captured using 10×10 cm and 20×20 cm quadrats. The images were processed using ERDAS Imagine software to determine the area covered by each waste component. This coverage was converted into a mass using density data determined as part of this study, yielding a determined composition which was then compared with the known composition of the samples. The image analysis results indicated a strong correlation with the actual values (mean r=0.89). The area coverage of the sample (10×10 cm or 20×20 cm) contributes to the accuracy as the dot-grid approach used with the particle size within the samples may result in components not being sufficiently monitored. This manuscript presents initial results of the application of an adapted innovative image-based method, and critically assesses how the technique could be improved and developed in the future.

[1]  Stuart Thomas Wagland,et al.  Development of an image-based analysis method to determine the physical composition of a mixed waste material. , 2012, Waste management.

[2]  Helmut Rechberger,et al.  Determination of the biogenic and fossil organic matter content of refuse-derived fuels based on elementary analyses , 2011 .

[3]  Helmut Rechberger,et al.  Abundance of (14)C in biomass fractions of wastes and solid recovered fuels. , 2009, Waste management.

[4]  S T Wagland,et al.  Investigation of the application of an enzyme-based biodegradability test method to a municipal solid waste biodrying process. , 2011, Waste management.

[5]  P J Longhurst,et al.  Determination of renewable energy yield from mixed waste material from the use of novel image analysis methods. , 2013, Waste management.

[6]  Johann Fellner,et al.  Methods for determining the biomass content of waste , 2008, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[7]  Nigel J. Simms,et al.  An integrated appraisal of energy recovery options in the United Kingdom using solid recovered fuel derived from municipal solid waste. , 2009, Waste management.

[8]  Simon J T Pollard,et al.  The biogenic content of process streams from mechanical-biological treatment plants producing solid recovered fuel. Do the manual sorting and selective dissolution determination methods correlate? , 2010, Waste management.

[9]  Ying-Hsi Chang,et al.  Comparative evaluation of RDF and MSW incineration , 1998 .

[10]  Costas A. Velis,et al.  Production and Quality Assurance of Solid Recovered Fuels Using Mechanical—Biological Treatment (MBT) of Waste: A Comprehensive Assessment , 2010 .

[11]  Erwin Thomanetz,et al.  Solid recovered fuels in the cement industry with special respect to hazardous waste , 2012, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[12]  Anurag Garg,et al.  Wastes as co-fuels: the policy framework for solid recovered fuel (SRF) in Europe, with UK implications. , 2007, Environmental science & technology.

[13]  Paola Lettieri,et al.  Techno-economic performance of energy-from-waste fluidized bed combustion and gasification processes in the UK context , 2009 .

[14]  Günter Scheffknecht,et al.  Ash fusibility and compositional data of solid recovered fuels , 2010 .

[15]  Costas A. Velis,et al.  Solid recovered fuel: materials flow analysis and fuel property development during the mechanical processing of biodried waste. , 2013, Environmental science & technology.

[16]  A Porteous,et al.  Why energy from waste incineration is an essential component of environmentally responsible waste management. , 2005, Waste management.

[17]  David Glew,et al.  Achieving sustainable biomaterials by maximising waste recovery. , 2013, Waste management.

[18]  Costas Velis,et al.  Solid recovered fuel: influence of waste stream composition and processing on chlorine content and fuel quality. , 2012, Environmental science & technology.

[19]  C A Velis,et al.  Biodrying for mechanical-biological treatment of wastes: a review of process science and engineering. , 2009, Bioresource technology.

[20]  Helmut Rechberger,et al.  A new method to determine the ratio of electricity production from fossil and biogenic sources in waste-to-Energy plants. , 2007, Environmental science & technology.

[21]  P J Longhurst,et al.  Comparison of coal/solid recovered fuel (SRF) with coal/refuse derived fuel (RDF) in a fluidized bed reactor. , 2011, Waste management.