Theoretical and experimental study of capacitance considering fabrication process and edge effect for MEMS comb actuator

This paper introduces a new theoretical model of plate capacitor for MEMS comb actuator. In this model, bulk fabrication process and edge effect are both considered using integration method and conformal transformation theory. In order to verify the correctness of the model, FEM software is used to calculate the value of the capacitance of the MEMS comb actuator. The simulated result is 1.441 pF. Relative errors to the model calculated result 1.401 pF and ideal model calculated result 1.267 pF are 2.78 and 12.07% respectively. Then, high precision capacitance measuring device is used to measure the micro-fabricated comb actuator. The tested result is 1.517 pF. Its relative error to the rectified value is 7.65%, much less than the relative error to ideal result 16.48%. This further indicates the correctness of the rectified model.

[1]  Burhanuddin Yeop Majlis,et al.  Analytical study on the capacitive accelerometer's fingers in microelectromechanical systems (MEMS) , 2002, ICONIP '02. Proceedings of the 9th International Conference on Neural Information Processing. Computational Intelligence for the E-Age (IEEE Cat. No.02EX575).

[2]  N. C. MacDonald,et al.  Optimal shape design of an electrostatic comb drive in microelectromechanical systems , 1998 .

[3]  V. Milanovic,et al.  Vertical combdrive based 2-D gimbaled micromirrors with large static rotation by backside island isolation , 2004, IEEE Journal of Selected Topics in Quantum Electronics.

[4]  Yilong Hao,et al.  A bulk micromachined lateral axis gyroscope with vertical sensing comb capacitors , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[5]  F. Ayazi,et al.  Design optimization and implementation of a microgravity capacitive HARPSS accelerometer , 2006, IEEE Sensors Journal.

[6]  A. Shkel,et al.  Inherently robust micromachined gyroscopes with 2-DOF sense-mode oscillator , 2005, Journal of Microelectromechanical Systems.

[7]  O. Solgaard,et al.  Pull-In Analysis of Torsional Scanners Actuated by Electrostatic Vertical Combdrives , 2008, Journal of Microelectromechanical Systems.

[8]  S. Ueda,et al.  Fishbone-shaped vertical comb actuator for dual-axis 1D analog micromirror array , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[9]  Zhenchuan Yang,et al.  Design and fabrication of a novel two-dimension MEMS-based tunable capacitor , 2002, IEEE 2002 International Conference on Communications, Circuits and Systems and West Sino Expositions.

[10]  M.C. Wu,et al.  Surface- and bulk- micromachined two-dimensional scanner driven by angular vertical comb actuators , 2005, Journal of Microelectromechanical Systems.