Mechanics of axial plastic collapse in multi-cell, multi-corner crush tubes

Quasi-static nonlinear finite element simulations are performed to study the energy absorption characteristics of axially crushed thin-walled aluminum tubes with different multi-cell, multi-corner configurations. By considering the kinematically consistent representation of plastic collapse as observed in the crush simulations, an analytical formula for the mean crush force is derived using the super folding element theory. In this model, the isotropic material is treated as rigid-perfectly plastic and the total internal energy is calculated by considering both bending and membrane deformation during the folding process. The simulation results show a strong correlation between the cross-sectional geometry and the crush response of the tubes. The analytical predictions for the mean crush force are compared with the FE results as well as other analytical models reported in the literature.

[1]  Changsoo Kim,et al.  Design of Aluminum Space Frame for Crashworthiness Improvement , 1996 .

[2]  Ronald Gronsky,et al.  Quasi-static axial crush response of a thin-wall, stainless steel box component , 2004 .

[3]  Sigit P. Santosa.  Crashworthiness analysis of ultralight metal structures , 1999 .

[4]  G. Cheng,et al.  Theoretical prediction and numerical simulation of multi-cell square thin-walled structures , 2006 .

[5]  W. Abramowicz.  Extremal paths in progressive plasticity , 1996 .

[6]  A. Otubushin,et al.  Detailed validation of a non-linear finite element code using dynamic axial crushing of a square tube , 1998 .

[7]  W. Abramowicz,et al.  Thin-walled structures as impact energy absorbers , 2003 .

[8]  R. Hill.  The mathematical theory of plasticity , 1950 .

[9]  Qing Li,et al.  Design optimization of regular hexagonal thin-walled columns with crashworthiness criteria , 2007 .

[10]  W. Abramowicz.  The effective crushing distance in axially compressed thin-walled metal columns , 1983 .

[11]  Wing Kam Liu,et al.  Nonlinear Finite Elements for Continua and Structures , 2000 .

[12]  J. M. Alexander.  AN APPROXIMATE ANALYSIS OF THE COLLAPSE OF THIN CYLINDRICAL SHELLS UNDER AXIAL LOADING , 1960 .

[13]  G. Cheng,et al.  A comparative study of energy absorption characteristics of foam-filled and multi-cell square columns , 2007 .

[14]  Mark O. Neal,et al.  Contact‐impact by the pinball algorithm with penalty and Lagrangian methods , 1991 .

[15]  O. Hopperstad,et al.  Static and dynamic axial crushing of square thin-walled aluminium extrusions , 1996 .

[16]  Tomasz Wierzbicki,et al.  Crash behavior of box columns filled with aluminum honeycomb or foam , 1998 .

[17]  T. Wierzbicki,et al.  Axial Crushing of Multicorner Sheet Metal Columns , 1989 .

[18]  Robert J. Hayduk,et al.  Extensional collapse modes of structural members , 1984 .

[19]  J. Bi,et al.  Crashworthiness optimization of foam -filled thin -walled structures , 2008 .

[20]  T. Wierzbicki,et al.  Relative merits of single-cell, multi-cell and foam-filled thin-walled structures in energy absorption , 2001 .

[21]  J. G. Tom,et al.  A study on an axial crush configuration response of thin-wall, steel box components: The quasi-static experiments , 2006 .

[22]  Heung-Soo Kim,et al.  New extruded multi-cell aluminum profile for maximum crash energy absorption and weight efficiency , 2002 .

[23]  T. Wierzbicki,et al.  On the Crushing Mechanics of Thin-Walled Structures , 1983 .

[24]  Tongxi Yu,et al.  Energy Absorption of Structures and Materials , 2003 .

[25]  Peter Wriggers,et al.  Computational Contact Mechanics , 2002 .

[26]  W. Abramowicz,et al.  Dynamic axial crushing of square tubes , 1984 .