Influence of pin imperfections on the tensile and fatigue behaviour of AA 7075-T6 friction stir lap welds

[1]  Dulce Maria Rodrigues,et al.  Friction stir welding industrialisation and research status , 2018 .

[2]  D. P. Sekulic,et al.  Wetting behaviour of Zn–Al filler metal on a stainless steel substrate , 2018 .

[3]  Chung-Yun Kang,et al.  Effects of the shoulder diameter and weld pitch on the tensile shear load in friction-stir welding of AA6111/AA5023 aluminum alloys , 2017 .

[4]  Zhengwei Li,et al.  Effect of rotating speed on joint morphology and lap shear properties of stationary shoulder friction stir lap welded 6061-T6 aluminum alloy , 2017 .

[5]  A. Echeverría,et al.  Friction Stir Weld Lap Joint Properties in Aeronautic Aluminium Alloys , 2017 .

[6]  Chen Yuhua,et al.  Effect of tool pin-tip profiles on material flow and mechanical properties of friction stir welding thick AA7075-T6 alloy joints , 2017 .

[7]  Yongxian Huang,et al.  Effect of Reverse-threaded Pin on Mechanical Properties of Friction Stir Lap Welded Alclad 2024 Aluminum Alloy , 2016 .

[8]  E. Arruti,et al.  Aluminium-steel lap joining by multipass friction stir welding , 2016 .

[9]  Zhengwei Li,et al.  Effect of lap configuration on magnesium to aluminum friction stir lap welding assisted by external stationary shoulder , 2016 .

[10]  Zhengwei Li,et al.  Joint features and mechanical properties of friction stir lap welded alclad 2024 aluminum alloy assisted by external stationary shoulder , 2016 .

[11]  Dulce Maria Rodrigues,et al.  Dissimilar friction stir lap welding of AA 5754-H22/AA 6082-T6 aluminium alloys: Influence of material properties and tool geometry on weld strength , 2015 .

[12]  D. Rodrigues,et al.  Influence of pin geometry and process parameters on friction stir lap welding of AA5754-H22 thin sheets , 2015 .

[13]  R. V. Barenji,et al.  Elucidating of tool rotational speed in friction stir welding of 7020-T6 aluminum alloy , 2015 .

[14]  A. De,et al.  Material adhesion and stresses on friction stir welding tool pins , 2014 .

[15]  M. Jahazi,et al.  Influence of tool geometry and rotational speed on mechanical properties and defect formation in friction stir lap welded 5456 aluminum alloy sheets , 2014 .

[16]  Arshad Noor Siddiquee,et al.  Experimental investigation on deformation and wear of WC tool during friction stir welding (FSW) of stainless steel , 2014, The International Journal of Advanced Manufacturing Technology.

[17]  Seçil Erim,et al.  Effects of temper condition and post weld heat treatment on the microstructure and mechanical properties of friction stir butt-welded AA7075 Al alloy plates , 2014 .

[18]  D. Rodrigues,et al.  Using torque sensitivity analysis in accessing Friction Stir Welding/Processing conditions , 2012 .

[19]  D. Rodrigues,et al.  Analysis of high temperature plastic behaviour and its relation with weldability in friction stir welding for aluminium alloys AA5083-H111 and AA6082-T6 , 2012 .

[20]  P. V. Venkitakrishnan,et al.  Microstructure and Mechanical Properties of Friction Stir Lap Welded Aluminum Alloy AA2014 , 2012 .

[21]  H. Bhadeshia,et al.  Review: Friction stir welding tools , 2011 .

[22]  G. Çam,et al.  Friction stir welded structural materials: beyond Al-alloys , 2011 .

[23]  B. Carlson,et al.  Study of friction stir joining of thin aluminium sheets in lap joint configuration , 2010 .

[24]  B. Thompson.  Tool Degradation Characterization in the Friction Stir Welding of Hard Metals , 2010 .

[25]  Patricio F. Mendez,et al.  ASM Proceedings of the International Conference: Trends in Welding Research , 2009 .

[26]  L. Fratini,et al.  Friction stir welding of lap joints: Influence of process parameters on the metallurgical and mechanical properties , 2009 .

[27]  P. Mendez,et al.  Scaling Laws for the Welding Arc, Weld Penetration and Friction Stir Welding , 2009 .

[28]  Moataz M. Attallah,et al.  Friction stir welding parameters: a tool for controlling abnormal grain growth during subsequent heat treatment , 2005 .

[29]  Lawrence E Murr,et al.  Self-optimization in tool wear for friction-stir welding of Al 6061+20% Al2O3 MMC , 2003 .

[30]  Anthony P. Reynolds,et al.  Factors affecting the properties of friction stir welded aluminum lap joints , 2001 .