Novel approach to determine cathode two-phase-flow pressure drop of proton exchange membrane fuel cell and its application on water management

[1]  Jonghyeon Kim,et al.  On-line and real-time diagnosis method for proton membrane fuel cell (PEMFC) stack by the superposition principle , 2016 .

[2]  Pucheng Pei,et al.  A review on water fault diagnosis of PEMFC associated with the pressure drop , 2016 .

[3]  S. Perng,et al.  A three-dimensional numerical investigation of trapezoid baffles effect on non-isothermal reactant transport and cell net power in a PEMFC , 2015 .

[4]  Ryan Anderson,et al.  Development of two-phase flow regime specific pressure drop models for proton exchange membrane fuel cells , 2015 .

[5]  Pucheng Pei,et al.  Water management of proton exchange membrane fuel cell based on control of hydrogen pressure drop , 2014 .

[6]  S. Kandlikar,et al.  Experimental validation of two-phase pressure drop multiplier as a diagnostic tool for characterizing PEM fuel cell performance , 2014 .

[7]  D. Wilkinson,et al.  An Analysis of Two-Phase Flow Pressure Drop in Operating Proton Exchange Membrane Fuel Cell Channels With the Lockhart-Martinelli Approach , 2014 .

[8]  Huicui Chen,et al.  Main factors affecting the lifetime of Proton Exchange Membrane fuel cells in vehicle applications: A review , 2014 .

[9]  Elham Hosseinzadeh,et al.  Thermal and water management of low temperature Proton Exchange Membrane Fuel Cell in fork-lift truck power system , 2013 .

[10]  Bo-Hyung Cho,et al.  Impedance-based diagnosis of polymer electrolyte membrane fuel cell failures associated with a low frequency ripple current , 2013 .

[11]  Evan J. See,et al.  Modeling gas flow in PEMFC channels: Part I – Flow pattern transitions and pressure drop in a simulated ex situ channel with uniform water injection through the GDL , 2012 .

[12]  Arun S. Mujumdar,et al.  Numerical evaluation of various gas and coolant channel designs for high performance liquid-cooled proton exchange membrane fuel cell stacks , 2012 .

[13]  I. Kevrekidis,et al.  Droplet and slug formation in polymer electrolyte membrane fuel cell flow channels: The role of inte , 2011 .

[14]  N. Takenaka,et al.  Measurement of water thickness in PEM fuel cells and analysis of gas velocity distributions , 2011 .

[15]  D. Wilkinson,et al.  Gas–liquid two-phase flow behavior in minichannels bounded with a permeable wall , 2011 .

[16]  Kohei Ito,et al.  A visualization study on relationship between water-droplet behavior and cell voltage appeared in st , 2011 .

[17]  Yun Wang,et al.  A review of polymer electrolyte membrane fuel cells: Technology, applications,and needs on fundamental research , 2011 .

[18]  Biao Zhou,et al.  Liquid water flooding process in proton exchange membrane fuel cell cathode with straight parallel channels and porous layer , 2011 .

[19]  Shou-Shing Hsieh,et al.  Effect of pressure drop in different flow fields on water accumulation and current distribution for a micro PEM fuel cell , 2011 .

[20]  J. García,et al.  Comparison of water management between two bipolar plate flow-field geometries in proton exchange membrane fuel cells at low-density current range , 2009 .

[21]  H. Iikura,et al.  Effect of water distributions on performances of JARI standard PEFC by using neutron radiography , 2009 .

[22]  Thomas A. Trabold,et al.  Water management studies in PEM fuel cells, Part II: Ex situ investigation of flow maldistribution, pressure drop and two-phase flow pattern in gas channels , 2009 .

[23]  Suman Basu,et al.  Modeling two-phase flow in PEM fuel cell channels , 2008 .

[24]  Sirivatch Shimpalee,et al.  The effect of serpentine flow-field designs on PEM fuel cell performance , 2008 .

[25]  Satish G. Kandlikar,et al.  An Experimental Investigation into the Effect of Surfactants on Air-Water Two-Phase Flow in Minichannels , 2006 .

[26]  Minggao Ouyang,et al.  Hydrogen pressure drop characteristics in a fuel cell stack , 2006 .

[27]  Frano Barbir,et al.  Relationship between pressure drop and cell resistance as a diagnostic tool for PEM fuel cells , 2005 .

[28]  S. Maharudrayya,et al.  Pressure losses in laminar flow through serpentine channels in fuel cell stacks , 2004 .

[29]  C. Hebling,et al.  Visualization of water buildup in the cathode of a transparent PEM fuel cell , 2003 .

[30]  B. A. Buffham,et al.  Perturbation viscometry of gas mixtures: fitting a model to logarithmic viscosity gradients , 2002 .

[31]  R. Rhodes Trussell,et al.  Review of Flow through Porous Media as Applied to Head Loss in Water Filters , 1999 .

[32]  D. Chisholm.  A theoretical basis for the Lockhart-Martinelli correlation for two-phase flow , 1967 .

[33]  C. Wilke.  A Viscosity Equation for Gas Mixtures , 1950 .

[34]  Yasushi Saito,et al.  Visualization of Water Accumulation Process in Polymer Electrolyte Fuel Cell Using Neutron Radiography , 2015 .

[35]  Qing Du,et al.  Effective removal and transport of water in a PEM fuel cell flow channel having a hydrophilic plate , 2014 .

[36]  Evan J. See.  In situ measurement, characterization, and modeling of two-phase pressure drop incorporating local water saturation in PEMFC gas channels , 2013 .

[37]  Yutaka Tabe,et al.  Gas Channel Optimisation for PEM Fuel Cell using the Lattice Boltzmann Method , 2012 .

[38]  Xianguo Li,et al.  A flow channel design procedure for PEM fuel cells with effective water removal , 2007 .

[39]  R. Skalak,et al.  THE HISTORY OF POISEUILLE'S LAW , 1993 .

[40]  R. Davis,et al.  Equation for the Determination of the Density of Moist Air (1981/91) , 1992 .

[41]  R. Lockhart.  Proposed Correlation of Data for Isothermal Two-Phase, Two-Component Flow in Pipes , 1949 .