Sulfonated polyether ether ketone and hydrated tin oxide proton conducting composites for direct methanol fuel cell applications

Abstract Composite membranes based on sulfonated polyether ether ketone (SPEEK) and hydrated tin oxide (SnO 2 · n H 2 O) were prepared and characterized. The formation of the composite substantially modified the properties of SPEEK in terms of durability and electrochemical performance. The structural and electrochemical performance of the samples were investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis, electrochemical impedance spectroscopy (EIS), water and methanol uptake (WU, MU), and direct methanol fuel cell (DMFC) tests. The polymer electrolyte membrane doped with 50 wt% SnO 2 · n (H 2 O) possess good proton transport characteristics, reduced methanol uptake and improved stability with respect to a reference unfilled membrane and it is then suitable for application as electrolyte in DMFCs.

[1]  U. Stimming,et al.  Conductance of Nafion 117 membranes as a function of temperature and water content , 1995 .

[2]  Vijay Ramani,et al.  Investigation of Nafion ® /HPA composite membranes for high temperature/low relative humidity PEMFC operation , 2004 .

[3]  Jung-Ho Wee,et al.  Which type of fuel cell is more competitive for portable application: Direct methanol fuel cells or direct borohydride fuel cells? , 2006 .

[4]  S. Kaliaguine,et al.  Sulfonated polyether ether ketone based composite polymer electrolyte membranes , 2001 .

[5]  S. Licoccia,et al.  A covalent organic/inorganic hybrid proton exchange polymeric membrane: synthesis and characterization , 2005 .

[6]  Silvia Licoccia,et al.  Sulfonated polyether ether ketone-based composite membranes doped with a tungsten-based inorganic proton conductor for fuel cell applications , 2006 .

[7]  G. Robertson,et al.  Synthesis and characterization of sulfonated poly(ether ether ketone) for proton exchange membranes , 2004 .

[8]  Tao Zhang,et al.  Function and Characterization of Metal Oxide−Nafion Composite Membranes for Elevated-Temperature H2/O2 PEM Fuel Cells , 2006 .

[9]  S. Licoccia,et al.  Increasing the operation temperature of polymer electrolyte membranes for fuel cells: From nanocomposites to hybrids , 2006 .

[10]  G. Alberti,et al.  New Preparation Methods for Composite Membranes for Medium Temperature Fuel Cells Based on Precursor Solutions of Insoluble Inorganic Compounds , 2005 .

[11]  M. Miyayama,et al.  Proton-Conducting Properties and Microstructure of Hydrated Tin Dioxide and Hydrated Zirconia , 2004 .

[12]  Felix Bauer,et al.  Microstructural characterization of Zr-phosphate–Nafion® membranes for direct methanol fuel cell (DMFC) applications , 2004 .

[13]  Deborah J. Jones,et al.  Non-Fluorinated Polymer Materials for Proton Exchange Membrane Fuel Cells , 2003 .

[14]  K. Kreuer.  On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells , 2001 .

[15]  Robert B. Moore,et al.  State of understanding of nafion. , 2004, Chemical reviews.

[16]  S. Licoccia,et al.  Effect of an ormosil-based filler on the physico-chemical and electrochemical properties of Nafion membranes , 2007 .

[17]  S. Srinivasan,et al.  International activities in DMFC R&D: status of technologies and potential applications , 2004 .

[18]  Composite Ormosil/Nafion Membranes as Electrolytes for Direct Methanol Fuel Cells , 2007 .

[19]  H. S. Gutowsky,et al.  A proton magnetic resonance and electron diffraction study of the thermal decomposition of tin(IV) hydroxides , 1967 .

[20]  G. Alberti,et al.  Composite Membranes for Medium-Temperature PEM Fuel Cells , 2003 .

[21]  G. Robertson,et al.  Casting solvent interactions with sulfonated poly(ether ether ketone) during proton exchange membrane fabrication , 2003 .

[22]  R. Savinell,et al.  Evaluation of a Sol-Gel Derived Nafion/Silica Hybrid Membrane for Polymer Electrolyte Membrane Fuel Cell Applications: II. Methanol Uptake and Methanol Permeability , 2001 .

[23]  C. Wieser,et al.  Novel Polymer Electrolyte Membranes for Automotive Applications – Requirements and Benefits , 2004 .

[24]  Chang-Soo Kim,et al.  Sulfonated poly(ether ether ketone)-based composite membrane for polymer electrolyte membrane fuel cells , 2006 .

[25]  Michael D. Guiver,et al.  Proton conducting composite membranes from polyether ether ketone and heteropolyacids for fuel cell applications , 2000 .