Cohesive and continuum damage models applied to fracture characterization of bonded joints

[1]  F. A. Leckie,et al.  Creep problems in structural members , 1969 .

[2]  J. Harris,et al.  Strength prediction of bonded single lap joints by non-linear finite element methods , 1984 .

[3]  John W. Gillespie,et al.  On the Analysis and Design of the End Notched Flexure (ENF) Specimen for Mode II Testing , 1986 .

[4]  P. Czarnocki,et al.  Non-linear numerical stress analysis of a symmetric adhesive-bonded lap joint , 1986 .

[5]  S. A. Hamoush,et al.  Fracture energy release rate of adhesive joints , 1989 .

[6]  A. D. Crocombe,et al.  Analysing structural adhesive joints for failure , 1990 .

[7]  Herzl Chai,et al.  Micromechanics of shear deformations in cracked bonded joints , 1992 .

[8]  Jan K. Spelt,et al.  Fracture load predictions for adhesive joints , 1994 .

[9]  N.G.R. Iyengar,et al.  Parametric study of interfacial debonding in adhesively bonded composite joints , 1994 .

[10]  N.G.R. Iyengar,et al.  Finite element analysis of crack growth in adhesively bonded joints , 1995 .

[11]  A. T. Marques,et al.  Modeling Compression Failure after Low Velocity Impact on Laminated Composites Using Interface Elements , 1997 .

[12]  Analysis of an Interface Fracture Specimen for Adhesively Bonded Joints , 1998 .

[13]  G. D. Sims,et al.  Comparison of test configurations for determination of mode II interlaminar fracture toughness results from international collaborative test programme , 1999 .

[14]  P.M.S.T. de Castro,et al.  Interface element including point‐to‐surface constraints for three‐dimensional problems with damage propagation , 2000 .

[15]  M. D. Thouless,et al.  Elastic–plastic mode-II fracture of adhesive joints , 2001 .

[16]  J. G. Williams,et al.  The calculation of adhesive fracture energies in mode I: revisiting the tapered double cantilever beam (TDCB) test , 2003 .

[17]  P.M.S.T. de Castro,et al.  Application of interface finite elements to three-dimensional progressive failure analysis of adhesive joints , 2003 .

[18]  M. D. Thouless,et al.  Use of mode-I cohesive-zone models to describe the fracture of an adhesively-bonded polymer-matrix composite , 2005 .