Partially constrained recovery of (meth)acrylate shape-memory polymer networks

The purpose of this study was to characterize the partial strain recovery of a thermoset shape-memory polymer under a constraining stress. Three polymer networks were synthesized from tert-butyl acrylate and poly(ethylene glycol) dimethacrylate (PEGDMA) solutions. The molecular weight and the weight fraction of the PEGDMA crosslinking monomer was altered systematically to maintain a constant glass transition temperature (Tg = 54°C) but tailorable rubbery moduli, which varied by almost an order of magnitude for the three polymer networks (E = 1.8–11.3°MPa). The shape-recovery behavior of the polymers under a constraining stress was characterized for programming temperature below (20°C) and above (70°C) the Tg. The experiments revealed a peak in the recovered strain for samples programmed at 20°C. Recovered strain scaled linearly with the constraining stress by the rubbery modulus. The work performed by the shape-memory polymer networks was observed to be primarily a function of constraining stress and crosslinking density, while programming temperature had a relatively mild influence; however, the efficiency of the shape-memory effect was shown to be a function of constraining stress and programming temperature, but was independent of crosslinking density. Maximum work efficiencies (up to 45%) were observed for programming temperature of 70°C. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012

[1]  Ken Gall,et al.  Thermal processing of polycrystalline NiTi shape memory alloys , 2005 .

[2]  Melodie F Metzger,et al.  Photothermal properties of shape memory polymer micro‐actuators for treating stroke * , 2002, Lasers in surgery and medicine.

[3]  Thao D. Nguyen,et al.  A thermoviscoelastic model for amorphous shape memory polymers: Incorporating structural and stress relaxation , 2008 .

[4]  N. Sahoo,et al.  Polyurethane‐Carbon Nanotube Nanocomposites Prepared by In‐Situ Polymerization with Electroactive Shape Memory , 2006 .

[5]  Alicia M. Ortega,et al.  Strong, Tailored, Biocompatible Shape‐Memory Polymer Networks , 2008, Advanced functional materials.

[6]  W. Benett,et al.  Fabrication and in vitro deployment of a laser-activated shape memory polymer vascular stent , 2007, Biomedical engineering online.

[7]  P. Mather,et al.  Shape Memory Polymer Research , 2009 .

[8]  K. Gall,et al.  Cytotoxicity and thermomechanical behavior of biomedical shape-memory polymer networks post-sterilization , 2008, Biomedical materials.

[9]  N. Goo,et al.  Electroactive Shape‐Memory Polyurethane Composites Incorporating Carbon Nanotubes , 2005 .

[10]  Yiping Liu,et al.  Thermomechanics of the shape memory effect in polymers for biomedical applications. , 2005, Journal of biomedical materials research. Part A.

[11]  S Rapp,et al.  Determination of recovery energy densities of shape memory polymers via closed-loop, force-controlled recovery cycling , 2010 .

[12]  Seng C. Tan,et al.  Advanced Self-Deployable Structures for Space Applications , 2007 .

[13]  Thao D. Nguyen,et al.  Finite deformation thermo-mechanical behavior of thermally induced shape memory polymers , 2008 .

[14]  Michael J. O'Brien,et al.  Rapid prototyping of active microfluidic components based on magnetically modified elastomeric materials , 2001 .

[15]  Yiping Liu,et al.  Thermomechanical recovery couplings of shape memory polymers in flexure , 2003 .

[16]  R. Langer,et al.  Biodegradable, Elastic Shape-Memory Polymers for Potential Biomedical Applications , 2002, Science.

[17]  Robin Shandas,et al.  Unconstrained recovery characterization of shape-memory polymer networks for cardiovascular applications. , 2007, Biomaterials.

[18]  I. Rousseau Challenges of Shape Memory Polymers : A Review of the Progress Toward Overcoming SMP's Limitations , 2008 .

[19]  A. Pegoretti,et al.  DSC analysis of post-yield deformed pbt. Effects of thermal history , 2008 .

[20]  Ken Gall,et al.  Deformation Limits in Shape‐Memory Polymers , 2008 .

[21]  Thao D Nguyen,et al.  Modeling the Relaxation Mechanisms of Amorphous Shape Memory Polymers , 2010, Advanced materials.

[22]  G. Whitesides,et al.  Patterning proteins and cells using soft lithography. , 1999, Biomaterials.

[23]  T. Ware,et al.  High‐Strain Shape‐Memory Polymers , 2010 .

[24]  K. Gall,et al.  Shape-memory polymers for microelectromechanical systems , 2004, Journal of Microelectromechanical Systems.

[25]  Ken Gall,et al.  Structure-property relationships in photopolymerizable polymer networks: Effect of composition on the crosslinked structure and resulting thermomechanical properties of a (meth)acrylate-based system , 2008 .

[26]  James R. McElhanon,et al.  Thermomechanical characterization of thermoset urethane shape‐memory polymer foams , 2010 .

[27]  Robin Shandas,et al.  Effects of thermal rates on the thermomechanical behaviors of amorphous shape memory polymers , 2010 .

[28]  D. Mantovani,et al.  Shape Memory Materials for Biomedical Applications , 2002 .

[29]  J. Robin,et al.  Experimental right ventricle to pulmonary artery discontinuity: outcome of polyurethane valved conduits. , 1998, The Journal of thoracic and cardiovascular surgery.

[30]  Andreas Lendlein,et al.  Kinetics and dynamics of thermally-induced shape-memory behavior of crosslinked short-chain branched polyethylenes , 2009 .

[31]  M. Wagner,et al.  Development of a polymer stent with shape memory effect as a drug delivery system , 2003, Journal of materials science. Materials in medicine.

[32]  A. Lendlein,et al.  Multifunctional Shape‐Memory Polymers , 2010, Advanced materials.

[33]  Thao D. Nguyen,et al.  Influence of thermoviscoelastic properties and loading conditions on the recovery performance of shape memory polymers , 2011 .

[34]  O. Ley,et al.  Calculation of arterial wall temperature in atherosclerotic arteries: effect of pulsatile flow, arterial geometry, and plaque structure , 2007, Biomedical engineering online.

[35]  P. Mather,et al.  Conductive shape memory nanocomposites for high speed electrical actuation , 2010 .

[36]  J. Shaw,et al.  Thermomechanical aspects of NiTi , 1995 .

[37]  Marc Behl,et al.  Actively moving polymers. , 2006, Soft matter.

[38]  K. Gall,et al.  Shape-memory polymer networks with Fe3O4 nanoparticles for remote activation , 2009 .