Fracture toughness measurements on igneous rocks using a high-pressure, high-temperature rock fracture mechanics cell

Abstract A sound knowledge of mechanical properties of rocks at high temperatures and pressures is essential for modelling volcanological problems such as fracture of lava flows and dike emplacement. In particular, fracture toughness is a scale-invariant material property of a rock that describes its resistance to tensile failure. A new fracture mechanics apparatus has been constructed enabling fracture toughness measurements on large (60 mm diameter) rock core samples at temperatures up to 750°C and pressures up to 50 MPa. We present a full description of this apparatus and, by plotting fracture resistance as a function of crack length, show that the size of the samples is sufficient for reliable fracture toughness measurements. A series of tests on Icelandic, Vesuvian and Etnean basalts at temperatures from 30 to 600°C and confining pressures up to 30 MPa gave fracture toughness values between 1.4 and 3.8 MPa m1/2. The Icelandic basalt is the strongest material and the Etnean material sampled from the surface crust of a lava flow the weakest. Increasing temperature does not greatly affect the fracture toughness of the Etnean or Vesuvian material but the Icelandic samples showed a marked increase in toughness at around 150°C, followed by a return to ambient toughness levels. This material also became tougher under moderate confining pressure but the other two materials showed little change in toughness. We describe in terms of fracture mechanics probable causes for the changes in fracture toughness and compare our experimental results with values obtained from dike propagation modelling found in the literature.

[1]  R. Hargraves.  Physics of Magmatic Processes , 1980 .

[2]  B. Atkinson.  Fracture Mechanics of Rock , 1987 .

[3]  M. Deighton.  Fracture of Brittle Solids , 1976 .

[5]  T. Reuschlé,et al.  α/β phase transition in quartz monitored using acoustic emissions , 1995 .

[6]  Roberto Scarpa,et al.  Monitoring and Mitigation of Volcano Hazards , 1996 .

[7]  Harry Pinkerton,et al.  Rheological properties of basaltic lavas at sub-liquidus temperatures: laboratory and field-measurements on lavas from Mount Etna. , 1995 .

[8]  Anthony R. Ingraffea,et al.  SUGGESTED METHODS FOR DETERMINING THE FRACTURE TOUGHNESS OF ROCK. , 1988 .

[9]  S. Blake,et al.  Modelling the emplacement of compound lava flows , 2000 .

[10]  H. Takahashi,et al.  Numerical simulation with experimental verification of the fracture behavior in granite under confining pressures based on the tension-softening model , 1993 .

[11]  E. Parfitt.  The role of rift zone storage in controlling the site and timing of eruptions and intrusions of Kilauea Volcano, Hawaii , 1991 .

[12]  C. Kilburn,et al.  Sampling and major element chemistry of the recent (A.D. 1631–1944) Vesuvius activity , 1993 .

[13]  K. Matsuki,et al.  Specimen size requirements for determining the inherent fracture toughness of rocks according to the ISRM suggested methods , 1991 .

[14]  C. Kilburn,et al.  Fracturing of Etnean and Vesuvian rocks at high temperatures and low pressures , 2004 .

[15]  F. Ouchterlony.  On the background to the formulae and accuracy of rock fracture toughness measurements using ISRM standard core specimens , 1989 .

[16]  Michael P. Ryan,et al.  The glass transition in basalt. , 1981 .

[17]  F. Ouchterlony.  Fracture toughness testing of rock with core based specimens , 1990 .

[18]  H. Takahashi,et al.  Boundary element analysis for standard specimen configurations in the ISRM suggested methods for determining fracture toughness of rock , 1991 .

[19]  P. Meredith,et al.  Fracture toughness and subcritical crack growth during high-temperature tensile deformation of Westerly granite and Black gabbro , 1985 .

[20]  D. Pollard,et al.  Deformation of host rocks and flow of magma during growth of minette dikes and breccia-bearing intrusions near Ship Rock, New Mexico , 1981 .

[21]  M. Darot,et al.  Ductile-brittle transition investigated by micro-indentation: results for quartz and olivine , 1985 .

[22]  B. Atkinson,et al.  11 – EXPERIMENTAL FRACTURE MECHANICS DATA FOR ROCKS AND MINERALS , 1987 .

[23]  R. Duclos,et al.  High-temperature behaviour of basalts—role of temperature and strain rate on compressive strength and KIc toughness of partially glassy basalts at atmospheric pressure , 1991 .

[24]  L. M. Barker.  Theory for determining KIc from small, non-LEFM specimens, supported by experiments on aluminum , 1979 .

[25]  C. Kilburn,et al.  Patterns and Predictability in the Emplacement of Subaerial Lava Flows and Flow Fields , 1996 .

[26]  Giuseppe Luongo,et al.  Active lavas : monitoring and modelling , 1993 .

[27]  Finn Ouchterlony,et al.  Suggested methods for determining the fracture toughness of rock , 1988 .

[28]  D. Pollard,et al.  Origins of blade-like dikes in volcanic rift zones. , 1987 .