Laser-arc hybrid welding of wrought to selective laser molten stainless steel

Selective laser melting (SLM) is a successful tool-free powder additive technology. The success of this manufacturing process results from the possibility to create complex shape parts, with intrinsic engineered features and good mechanical properties. Joining SLM steel to similar or dissimilar steel can overcome some limitations of the product design like small dimension, undercut profile, and residual stress concentration. In this way, the range of applications of the SLM process can be broadened. In this paper, the hybrid laser welding of selective laser molten stainless steel was investigated. A high-power fiber laser was coupled to an electric arc and austenitic stainless steel wrought and SLM parts were welded together. The power and speed parameters were investigated. The joints were analyzed in terms of weld bead profile, microstructure, microhardness, and tensile test. The efficiency of the welding process was evaluated through the line energy input versus the weld molten area.

[1]  G. Casalino,et al.  Microstructural analysis of AISI 304 bars welded with high speed pulsed discharges , 2007 .

[2]  Priti Wanjara,et al.  Hybrid fiber laser – Arc welding of thick section high strength low alloy steel , 2011 .

[3]  P. Masson,et al.  Analysis of hybrid Nd:Yag laser-MAG arc welding processes. , 2011 .

[4]  R. Poprawe,et al.  Progress in laser-mag hybrid welding of high-strength steels up to 30 mm thickness , 2007 .

[5]  L. Froyen,et al.  Selective laser melting of iron-based powder , 2004 .

[6]  S. C. Costa,et al.  Weldability of iron-based powder metal materials using pulsed plasma arc welding process , 2008 .

[7]  Caterina Casavola,et al.  Preliminary investigation on distribution of residual stress generated by the selective laser melting process , 2009 .

[8]  Christian Walz,et al.  The Influence of Various Hybrid Welding Parameters on Bead Geometry Arc power and transfer mode greatly affect bead width, penetration, and reinforcement , 2004 .

[9]  Shuangyue Liu,et al.  Microstructure of Laser-MAG Hybrid Welds of Sintered P/M Steel , 2012, Journal of materials engineering and performance (Print).

[10]  S. Asai,et al.  Application of Plasma MIG Hybrid Welding to Dissimilar Joints Between Copper and Steel , 2012, Welding in the World.

[11]  Liang Chen,et al.  Interaction of both plasmas in CO2 laser-MAG hybrid welding of carbon steel , 2003, International Congress on Laser Advanced Materials Processing.

[12]  P. Romero,et al.  Laser-tig hybrid welding of very thin austenitic stainless steel sheets , 2005 .

[13]  Cui Li,et al.  Fiber laser-GMA hybrid welding of commercially pure titanium , 2009 .

[14]  A. Esnaola,et al.  Study of mechanical properties of AISI 316 stainless steel processed by “selective laser melting”, following different manufacturing strategies , 2010 .

[15]  L. Jinhui,et al.  Study on formation of surface and microstructure of stainless steel part produced by selective laser melting , 2010 .

[16]  Gao Ming,et al.  Effects of gas shielding parameters on weld penetration of CO2 laser-TIG hybrid welding , 2007 .

[17]  Eckhard Beyer,et al.  Process characteristics of fibre-laser-assisted plasma arc welding , 2011 .

[18]  P. Sathiya,et al.  Effect of shielding gases on microstructure and mechanical properties of super austenitic stainless steel by hybrid welding , 2012 .

[19]  J. F. Lancaster,et al.  Metallurgy of Welding , 1980 .

[20]  Xiaoyan Zeng,et al.  Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding , 2010 .

[21]  D. Yapp,et al.  Welding with high power fiber lasers – A preliminary study , 2007 .

[22]  E. Beyer,et al.  Hybrid laser beam welding—Classification, characteristics, and applications , 2006 .

[23]  Meng Joo Er,et al.  New Trends in Technologies: Devices, Computer, Communication and Industrial Systems , 2010 .