Numerical investigation of cold-start behavior of polymer-electrolyte fuel-cells from subzero to normal operating temperatures – Effects of cell boundary and operating conditions

Abstract In this study, we performed transient cold-start simulations of polymer-electrolyte fuel-cells (PEFCs) under a wide range of PEFC operating temperatures, from subzero (−20 °C) to normal operating temperatures (80 °C). For these wide temperature range transient simulations, the cold-start model developed in a previous study is enhanced by including ice-melting phenomena and additional constitutive relationships. The model successfully predicts various stages of PEFC cold-starts, i.e., ice formation/growth, constant ice accumulation with undersaturated vapor, ice melting/membrane hydration, and membrane dehydration. In addition, the results for simulations performed under various cold-start operating conditions clearly address the effects of key cold-start factors such as cathode stoichiometry, external thermal boundary condition, inlet relative humidity, startup temperature, and co- and counter-flow configurations on PEFC cold-start behavior, especially ice freezing/melting and membrane hydration/dehydration processes. This numerical investigation attempts to develop effective cold-start strategies that can simultaneously suppress both ice formation/growth and anode dry-out, thereby ensuring rapid and stable startup of a PEFC from subzero temperatures.

[1]  Xianguo Li,et al.  Simultaneous measurement of current and temperature distributions in a proton exchange membrane fuel cell during cold start processes , 2011 .

[2]  Shanhai Ge,et al.  A mathematical model for PEMFC in different flow modes , 2003 .

[3]  K. Sanui,et al.  Proton-conducting polymer electrolyte membranes based on hydrocarbon polymers , 2000 .

[4]  A. Abdel-azim.  Fundamentals of Heat and Mass Transfer , 2011 .

[5]  Hossein Toghiani,et al.  Effect of sub-freezing temperatures on a PEM fuel cell performance, startup and fuel cell components , 2006 .

[6]  Chao-Yang Wang,et al.  Current Ramping: A Strategy for Rapid Start-up of PEMFCs from Subfreezing Environment , 2010 .

[7]  Shanhai Ge,et al.  Characteristics of subzero startup and water/ice formation on the catalyst layer in a polymer electrolyte fuel cell , 2007 .

[8]  Hyunchul Ju,et al.  Nonisothermal Modeling of Polymer Electrolyte Fuel Cells I. Experimental Validation , 2005 .

[9]  M. Guiver,et al.  High performance nitrile copolymers for polymer electrolyte membrane fuel cells , 2008 .

[10]  J. Weidner,et al.  Diffusion of water in Nafion 115 membranes , 2000 .

[11]  Hyunchul Ju,et al.  Evaluating cold-start behaviors of end and intermediate cells in a polymer electrolyte fuel cell (PEFC) stack , 2012 .

[12]  Thomas Koop,et al.  Review of the vapour pressures of ice and supercooled water for atmospheric applications , 2005 .

[13]  Manish Khandelwal,et al.  Characteristic Behavior of Polymer Electrolyte Fuel Cell Resistance during Cold Start , 2008 .

[14]  Zhigang Shao,et al.  Investigation of resided water effects on PEM fuel cell after cold start , 2007 .

[15]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[16]  Shimshon Gottesfeld,et al.  The Water Content Dependence of Electro-Osmotic Drag in Proton-Conducting Polymer Electrolytes , 1995 .

[17]  Hyunchul Ju,et al.  Improving the cold-start capability of polymer electrolyte fuel cells (PEFCs) by using a dual-function micro-porous layer (MPL): Numerical simulations , 2013 .

[18]  Hyunchul Ju,et al.  Comparison of numerical simulation results and experimental data during cold-start of polymer electrolyte fuel cells , 2012 .

[19]  M. Ciureanu.  Effects of Nafion® Dehydration in PEM Fuel Cells , 2004 .

[20]  Chao-Yang Wang,et al.  Effects of operating and design parameters on PEFC cold start , 2007 .

[21]  Chao-Yang Wang,et al.  Fundamental models for fuel cell engineering. , 2004, Chemical reviews.

[22]  Chao-Yang Wang,et al.  Potentiostatic Start-Up of PEMFCs from Subzero Temperatures , 2008 .

[23]  Shimshon Gottesfeld,et al.  Low platinum loading electrodes for polymer electrolyte fuel cells fabricated using thermoplastic ionomers , 1995 .

[24]  Chao-Yang Wang,et al.  A Multiphase Model for Cold Start of Polymer Electrolyte Fuel Cells , 2007 .

[25]  R. Mcdonald,et al.  Effects of Deep Temperature Cycling on Nafion® 112 Membranes and Membrane Electrode Assemblies , 2004 .

[26]  Chao-Yang Wang,et al.  Isothermal Cold Start of Polymer Electrolyte Fuel Cells , 2007 .

[27]  Chao-Yang Wang,et al.  Durability of Membrane Electrode Assemblies under Polymer Electrolyte Fuel Cell Cold-Start Cycling , 2008 .

[28]  Johan Ko,et al.  Effects of cathode catalyst layer design parameters on cold start behavior of polymer electrolyte fuel cells (PEFCs) , 2013 .

[29]  Dong Min Kim,et al.  Impact of metallic bipolar plates on cold-start behaviors of Polymer Electrolyte Fuel Cells (PEFCs) , 2012 .

[30]  In-Hwan Oh,et al.  Characteristics of the PEMFC Repetitively Brought to Temperatures below 0°C , 2003 .

[31]  Dietmar Gerteisen,et al.  Degradation effects in polymer electrolyte membrane fuel cell stacks by sub-zero operation : An in situ and ex situ analysis , 2008 .

[32]  Hua Meng,et al.  Numerical analyses of non-isothermal self-start behaviors of PEM fuel cells from subfreezing startup temperatures , 2008 .