Application of Remote Power-by-Light Switching in a Simplified BOTDA Sensor Network

We propose and demonstrate the use of spatial multiplexing as a means to reduce the costs of distributed sensing networks. We propose a new scheme in which remote power-by-light switching is deployed to scan multiple branches of a distributed sensing network based on Brillouin Optical Time Domain Analysis (BOTDA) sensors. A proof-of-concept system is assembled with two 5-km sensor fiber branches that are alternatively monitored using a fast remotely controlled and optically powered optical switch. The multiplexed distributed sensor fibers were located 10 km away from the interrogation unit and a Raman pump is used to remotely power the switch. Furthermore, the deployed BOTDA unit uses an alternative configuration that can lead to simplified setups.

[1]  B. Colpitts,et al.  Distributed sensor based on dark-pulse Brillouin scattering , 2005, IEEE Photonics Technology Letters.

[2]  Ander Zornoza,et al.  Brillouin distributed sensor using RF shaping of pump pulses , 2010 .

[3]  Xiaoyi Bao,et al.  How to obtain high spectral resolution of SBS-based distributed sensing by using nanosecond pulses. , 2006, Optics express.

[4]  M. Lopez-Amo,et al.  BOTDA sensor network with power by light remote switching , 2012, Other Conferences.

[5]  Ander Zornoza,et al.  Low-cost Brillouin optical time domain analysis (BOTDA) distributed sensor setup , 2010, European Workshop on Optical Fibre Sensors.

[6]  Ander Zornoza,et al.  Long-range hybrid network with point and distributed Brillouin sensors using Raman amplification. , 2010, Optics express.

[7]  X. Bao,et al.  Differential pulse-width pair BOTDA for high spatial resolution sensing. , 2008, Optics express.

[8]  Luc Thevenaz,et al.  Impact of pump depletion on the determination of the Brillouin gain frequency in distributed fiber sensors , 2011, International Conference on Optical Fibre Sensors.

[9]  Il-Bum Kwon,et al.  Development of Fiber Optic BOTDA Sensor for Intrusion Detection , 2001 .

[10]  Luc Thévenaz,et al.  Novel schemes for optical signal generation using laser injection locking with application to Brillouin sensing , 2004 .

[11]  S. Martín-López,et al.  Raman-assisted Brillouin optical time-domain analysis with sub-meter resolution over 100 km. , 2012, Optics express.

[12]  R. C. Miller,et al.  Sound alerter powered over an optical fiber , 1978, The Bell System Technical Journal.

[13]  Luc Thévenaz,et al.  Effect of pulse depletion in a Brillouin optical time-domain analysis system. , 2013, Optics express.

[14]  Sonia Martin-Lopez,et al.  Detrimental effect of modulation instability on distributed optical fiber sensors using stimulated Brillouin scattering , 2005, International Conference on Optical Fibre Sensors.

[15]  M López-Amo,et al.  Fiber-based 205-mW (27% efficiency) power-delivery system for an all-fiber network with optoelectronic sensor units. , 1999, Applied optics.

[16]  C Heras,et al.  Subpicometer wavelength accuracy with gain-switched laser diode in high-resolution optical spectrometry. , 2008, Optics express.

[17]  Boyd,et al.  Noise initiation of stimulated Brillouin scattering. , 1990, Physical review. A, Atomic, molecular, and optical physics.

[18]  Antonio Quintela Incera,et al.  Fiber Optic Sensors in Structural Health Monitoring , 2011, Journal of Lightwave Technology.

[19]  Moshe Tur,et al.  High Spatial and Spectral Resolution Long-Range Sensing Using Brillouin Echoes , 2010, Journal of Lightwave Technology.

[20]  Fabrizio Di Pasquale,et al.  Optimization of long-range BOTDA sensors with high resolution using first-order bi-directional Raman amplification. , 2011, Optics express.

[21]  M Dreschmann,et al.  Optically powered fiber networks. , 2008, Optics express.

[22]  O. Ogawa.  A new multi-point sensing system based on optical pass switching and remote optical power supply , 2011, International Conference on Optical Fibre Sensors.