Farfield Plume Measurement and Analysis on the NASA-300 M and NASA-300 MS IEPC-2013-057

NASA is developing a 10to 15-kW Hall thruster system to support future NASA missions. This activity is funded under the Space Technology Mission Directorate Solar Electric Propulsion Technology Demonstration Mission project. As a part of the development process, the NASA-300M, a 20-kW Hall thruster, was modified to incorporate the magnetic shielding concept and named the NASA-300MS. This activity was undertaken to assess the viability of using the magnetic shielding concept on a high-power Hall thruster to greatly reduce discharge channel erosion. This paper reports on the study to characterize the far-field plumes of the NASA-300M and NASA-300MS. Diagnostics deployed included a polarly-swept Faraday probe, a Wien filter (ExB probe), a retarding potential analyzer, and a Langmuir probe. During the study, a new, more accurate, integration method for analyzing Wien filter probe data was implemented and effect of secondary electron emission on the Faraday probe data was treated. Comparison of the diagnostic results from the two thrusters showed that the magnetically shielded version performed with ~2% higher voltage utilization efficiency, ~2% lower plume divergence efficiency, and ~2% lower mass utilization efficiency compared to the baseline version. The net change in efficiency is within the aggregate measurement uncertainty so the overall performance is roughly equal for the two versions of the thruster. Anode efficiency calculated from thrust stand measurement corroborates this finding.

[1]  H. D. Hagstrum.  Metastable Ions of the Noble Gases , 1956 .

[2]  Alec D. Gallimore,et al.  Method for analyzing E×B probe spectra from Hall thruster plumes , 2008 .

[3]  Homer D. Hagstrum,et al.  Auger Ejection of Electrons from Molybdenum by Noble Gas Ions , 1956 .

[4]  I. Mikellides,et al.  Magnetic Shielding of the Channel Walls in a Hall Plasma Accelerator , 2011 .

[5]  Alec D Gallimore,et al.  Evaluation of ion collection area in Faraday probes. , 2010, The Review of scientific instruments.

[6]  A. Gallimore,et al.  High-Specific Impulse Hall Thrusters, Part 2: Efficiency Analysis , 2006 .

[7]  T. W. Haag.  Thrust stand for high‐power electric propulsion devices , 1991 .

[8]  V. Kim.  Main Physical Features and Processes Determining the Performance of Stationary Plasma Thrusters , 1998 .

[9]  Homer D. Hagstrum,et al.  AUGER EJECTION OF ELECTRONS FROM TUNGSTEN BY NOBLE GAS IONS , 1954 .

[10]  Alec D. Gallimore,et al.  Near-field Ion Current Density Measurements of a 6-kW Hall Thruster , 2009 .

[11]  Lee S. Mason,et al.  Benefits of Power and Propulsion Technology for a Piloted Electric Vehicle to an Asteroid , 2011 .

[12]  P. Peterson,et al.  A High Specific Impulse Two-Stage Hall Thruster with Plasma Lens Focusing , 2001 .

[13]  Hani Kamhawi,et al.  Farfield Ion Current Density Measurements before and after the NASA HiVHAc EDU2 Vibration Test , 2012 .

[14]  J. Steinier,et al.  Smoothing and differentiation of data by simplified least square procedure. , 1972, Analytical chemistry.

[15]  Alec D. Gallimore,et al.  Evaluation of Facility Effects on Ion Migration in a Hall Thruster Plume , 2011 .

[16]  A. Savitzky,et al.  Smoothing and Differentiation of Data by Simplified Least Squares Procedures. , 1964 .

[17]  I. Mikellides,et al.  Design of a Laboratory Hall Thruster with Magnetically Shielded Channel Walls, Phase III: Comparison of Theory with Experiment , 2012 .

[18]  Hani Kamhawi,et al.  Langmuir Probe Measurements Within the Discharge Channel of the 20-kW NASA-300M and NASA-300MS Hall Thrusters , 2013 .

[19]  Alec D. Gallimore,et al.  Langmuir Probe Measurements in the Discharge Channel of a 6-kW Hall Thruster , 2008 .

[20]  E. Choueiri.  Fundamental difference between the two Hall thruster variants , 2001 .