Single Chip Microcomputer Cluster Management
暂无分享,去创建一个
This paper presents a system in which the cluster devices are controlled by single-chip microcomputers, with emphasis on the cluster management techniques of single-chip microcomputers. Each device in a cluster is controlled by a single-chip microcomputer collecting sample data sent to and driving the device by driving data received from the same cluster management computer through COMs. The cluster management system running on the cluster management computer carries out such control as initial SCM identification, run time slice management, communication resource utilization, fault tolerance and error corrections on single-chip microcomputers. Initial SCM identification is achieved by signal responses between the single-chip microcomputers and the cluster management computer. By using the port priority and the parallelization of serial communications, the systems real-time performance is maximized. The real-time performance can be adjusted and improved by increasing or decreasing COMs and the ports linked to each COM, and the real-time performance can also be raised by configuring more cluster management computers. Fault-tolerant control occurs in the initialization phase and the operational phase. In the initialization phase, the cluster management system incorporates unidentified single-chip microcomputers into the system based on the history information recorded on external storage media. In the operational phase, if an operation error of reading and writing on a single-chip microcomputer reaches a predetermined threshold, the single-chip microcomputer is regarded as serious fault or not existing. The cluster management system maintains accuracy maintenance database on external storage medium to solve nonlinear control of specific devices and accuracy maintenance due to wear. The cluster management system uses object-oriented method to design a unified driving framework in order to enable the implementation of the cluster management system simplified, standardized and easy to transplant. The system has been applied in a large-scale simulation system of 230 single-chip microcomputers, which proves that the system is reliable, real-time and easy to maintain.
[1] J. M. Hollerbach,et al. Design, Sensing, and Control of a Scaled Wind Tunnel for Atmospheric Display , 2012, IEEE/ASME Transactions on Mechatronics.