A high efficiency 140W power amplifier based on a single GaN HEMT device for space applications in L-band

This paper deals with the design, manufacture and test of a high efficiency power amplifier for L-band space borne applications. The circuit operates with a single 36 mm gate periphery GaN HEMT power bar die allowing both improved integration and performance as compared with standard HPA design in a similar RF power range. A huge effort dedicated to the device's characterization and modeling has eased the circuit optimization leaning on the multi-harmonics impedances synthesis. Test results demonstrate performance up to 140 W RF output power with an associated 60% PAE for a limited 3.9 dB gain compression under 50 V supply voltage using a single GaN power bar.

[1]  K. Nakade,et al.  Development of 150W S-band GaN solid state power amplifier for satellite use , 2010, 2010 Asia-Pacific Microwave Conference.

[2]  Pinglian Wang,et al.  A high-efficiency power amplifier using GaN HEMTs , 2011, 2011 International Conference on Electronics, Communications and Control (ICECC).

[3]  Enrico Colzi,et al.  4.1: Navigation traveling wave tube amplifiers - trade-off aspects , 2010, 2010 IEEE International Vacuum Electronics Conference (IVEC).

[4]  W.L. McGeary,et al.  High Efficiency, 150 to 200 watt L-band traveling wave tube for GPS satellites , 2008, 2008 IEEE International Vacuum Electronics Conference.

[5]  W. Durr,et al.  New Travelling Wave Tubes for L-Band and S-Band in Orbit Applications , 2007, 2007 IEEE International Vacuum Electronics Conference.