Multiple closed loop recycling of carbon fibre composites with the HiPerDiF (High Performance Discontinuous Fibre) method

Abstract The aim of this article is to apply the concept of Circular Economy, where end-of-life products and production wastes are recycled into reusable materials, to carbon fibre reinforced plastics. This not only reduces the amount of material disposed into landfills, but also enables manufacturers to achieve significant savings. While current research focuses on the performance of recycled carbon fibre reinforced composites after one recycling process, this paper aims to investigate the performance of composites remanufactured from short carbon fibres that have undergone multiple recycling loops with the High Performance Discontinuous Fibre (HiPerDiF) method. The HiPerDiF method enables the production of aligned short fibre composites with exceptional mechanical properties. In addition, using short fibres makes the composite material intrinsically easy to recycle. Short virgin carbon fibres underwent two loops of fibre reclamation and remanufacturing. A correlation between the composites’ mechanical properties and the nature of the fibres, i.e. reduction in fibre lengths, as well as the residual matrix accumulation from the reclaiming process over a number of recycling loops, was established.

[1]  Gary A. Leeke,et al.  Current status of recycling of fibre reinforced polymers: Review of technologies, reuse and resulting properties , 2015 .

[2]  Michael R Wisnom,et al.  Pseudo-ductility in intermingled carbon/glass hybrid composites with highly aligned discontinuous fibres , 2015 .

[3]  Craig A. Smith.  Production and evaluation of waste and short-fibre composites , 2013 .

[4]  M. Narkis,et al.  Oriented short glass‐fiber composites. I. Preparation and statistical analysis of aligned fiber mats , 1975 .

[5]  NetComposites Sue Halliwell.  End of Life Options for Composite Waste , 2007 .

[6]  K. Potter,et al.  A novel manufacturing method for aligned discontinuous fibre composites (High Performance-Discontinuous Fibre method) , 2014 .

[7]  D. Guell,et al.  Flow-induced alignment in composite materials: current applications and future prospects , 1997 .

[8]  Jianjun Du,et al.  Recycling of carbon/epoxy composites , 2004 .

[9]  Stephen Pickering,et al.  Supercritical propanol, a possible route to composite carbon fibre recovery: A viability study , 2006 .

[10]  Stephen Pickering,et al.  The Potential for Fibre Alignment in the Manufacture of Polymer Composites from Recycled Carbon Fibre , 2009 .

[11]  Paul T. Williams,et al.  Autoclave pyrolysis of carbon reinforced composite plastic waste for carbon fibre and chemicals recovery , 2013 .

[12]  O. Harrysson,et al.  Computational Design of Electrode Networks for Preferentially Aligned Short Fiber Composite Component Fabrication via Dielectrophoresis , 2012 .

[13]  K. Schulte,et al.  CFRP-Recycling Following a Pyrolysis Route: Process Optimization and Potentials , 2009 .

[14]  Soraia Pimenta,et al.  Recycling carbon fibre reinforced polymers for structural applications: technology review and market outlook. , 2011, Waste management.

[15]  THE RECYCLING OF CARBON FIBRE COMPOSITES USING A FLUIDISED BED PROCESS , 2000 .

[16]  S. Pinho,et al.  The effect of recycling on the mechanical response of carbon fibres and their composites , 2012 .

[17]  A. Graham,et al.  Improved Mechanical Properties in Hydrodynamically Aligned, Short-Fiber Composite Materials , 1996 .

[18]  T. Flemming,et al.  A new aligned short-carbon-fiber-reinforced thermoplastic prepreg , 1996 .

[19]  N. Warrior,et al.  Fiber Alignment in Directed Carbon Fiber Preforms — A Feasibility Study , 2009 .

[20]  G. Bagg,et al.  The glycerine process for the alignment of fibres and whiskers , 1969 .

[21]  Vicki P. McConnell,et al.  Launching the carbon fibre recycling industry , 2010 .