Structure failure of the sealing in the assembly process for proton exchange membrane fuel cells

Abstract Sealing stability in proton exchange membrane fuel cell (PEMFC) is critical to the performance and safety of stacks. However, sealing structure failure (SSF), which leads to the leakage of reactant gases, often occurs in the assembly process or start-up operation for PEMFCs. This study aims to investigate the effects of geometrical structure and material parameters of sealing components on the sealing structure failure. Slippage angle and slippage distance are adopted to evaluate the risk of SSF. Finite element (FE) simulations are conducted with consideration of the assembly process and start-up operation. Experiments are carried out to validate the accuracy of the FE model. Influences of parameters of gasket, membrane electrode assembly (MEA) frame, sealing groove shape of bipolar plate (BPP), and gas pressure are discussed in detail. Meanwhile, the risks of SSF for the stack by using metallic and graphite BPPs are compared. It is demonstrated that material properties and geometrical parameters of sealing components in PEMFC have great effects on SSF. The methodology developed is beneficial to the understanding of the SSF, and it can also be applied to guide the design of PEMFC stack assembly process to keep a good sealing reliability.

[1]  K. Jiao,et al.  Modeling of high temperature proton exchange membrane fuel cell start-up processes , 2016 .

[2]  Ying Liu,et al.  Estimation of contact resistance in proton exchange membrane fuel cells , 2006 .

[3]  Y. Zhang,et al.  Effects of Frame Materials and Structures on Stress Concentration of Membrane Electrode Assembly of PEMFCs , 2013 .

[4]  Uttara Chakraborty,et al.  Fuel crossover and internal current in proton exchange membrane fuel cell modeling , 2016 .

[5]  Anima B. Bose,et al.  Performance of individual cells in polymer electrolyte membrane fuel cell stack under-load cycling conditions , 2013 .

[6]  Xinmin Lai,et al.  Analysis of the flow distribution for thin stamped bipolar plates with tapered channel shape , 2016 .

[7]  J. W. Van Zee,et al.  The effects of compression and gas diffusion layers on the performance of a PEM fuel cell , 1999 .

[8]  Y. J. Chao,et al.  Sealing force prediction of elastomeric seal material for PEM fuel cell under temperature cycling , 2014 .

[9]  Linfa Peng,et al.  Effect of dimensional error of metallic bipolar plate on the GDL pressure distribution in the PEM fuel cell , 2009 .

[10]  Andrew Higier,et al.  Effect of gas diffusion layer compression on PEM fuel cell performance , 2006 .

[11]  Aidy Ali,et al.  A review and comparison on some rubber elasticity models , 2010 .

[12]  Benjamin D. Gould,et al.  Decreasing contact resistance in proton-exchange membrane fuel cells with metal bipolar plates , 2013 .

[13]  Bosung Kim,et al.  The effects of air stoichiometry and air excess ratio on the transient response of a PEMFC under load change conditions , 2015 .

[14]  Yuh J. Chao,et al.  Chemical degradation of five elastomeric seal materials in a simulated and an accelerated PEM fuel cell environment , 2011 .

[15]  J. V. Zee,et al.  Effect of water on life prediction of liquid silicone rubber seals in polymer electrolyte membrane f , 2011 .

[16]  Wei-Mon Yan,et al.  A three-dimensional modeling of transport phenomena of proton exchange membrane fuel cells with various flow fields , 2012 .

[17]  Tero Hottinen,et al.  Modeling of Polymer Electrolyte Membrane Fuel Cell Stack End Plates , 2008 .

[18]  Yen-Ju Su,et al.  Effect of gas diffusion layer compression on the performance in a proton exchange membrane fuel cell , 2008 .

[19]  M. Pan,et al.  Degradation of silicone rubbers with different hardness in various aqueous solutions , 2014 .

[20]  Min-Soo Kim,et al.  Local measurements of hydrogen crossover rate in polymer electrolyte membrane fuel cells , 2013 .

[21]  E. Alizadeh,et al.  Investigation of contact pressure distribution over the active area of PEM fuel cell stack , 2016 .

[22]  Abas Ramiar,et al.  An investigation of temperature effect on performance of dead-end cascade H 2 /O 2 PEMFC stack with integrated humidifier and separator , 2016 .

[23]  Zhigang Zhan,et al.  A review on the sealing structures of membrane electrode assembly of proton exchange membrane fuel cells , 2013 .

[24]  David A. Dillard,et al.  Seals and Sealants in PEM Fuel Cell Environments: Material, Design, and Durability Challenges , 2004 .

[25]  Xinmin Lai,et al.  Study on shape error effect of metallic bipolar plate on the GDL contact pressure distribution in proton exchange membrane fuel cell , 2013 .

[26]  Young-Bae Kim,et al.  Channel geometry optimization of a polymer electrolyte membrane fuel cell using genetic algorithm , 2015 .

[27]  Q. Zou,et al.  Contact mechanics approach to determine contact surface area between bipolar plates and current collector in proton exchange membrane fuel cells , 2008 .

[28]  Abas Ramiar,et al.  Improving PEM fuel cell performance and effective water removal by using a novel gas flow field , 2016 .

[29]  Miao Qian,et al.  A micro-reactor with micro-pin-fin arrays for hydrogen production via methanol steam reforming , 2012 .

[30]  Jun Ni,et al.  Design, Optimization, and Fabrication of Slotted-Interdigitated Thin Metallic Bipolar Plates for PEM Fuel Cells , 2011 .

[31]  Jun Ni,et al.  Flow channel shape optimum design for hydroformed metal bipolar plate in PEM fuel cell , 2008 .

[32]  Olli Himanen,et al.  Contact resistance between gas diffusion layer and catalyst layer of PEM fuel cell , 2008 .

[33]  A. Bates,et al.  An experimental and simulation study of novel channel designs for open-cathode high-temperature polymer electrolyte membrane fuel cells , 2016 .

[34]  Chai Wah Wu,et al.  Multi-objective topology optimization of end plates of proton exchange membrane fuel cell stacks , 2011 .

[35]  Jun Ni,et al.  Fabrication of Metallic Bipolar Plates for Proton Exchange Membrane Fuel Cell by Flexible Forming Process-Numerical Simulations and Experiments , 2010 .

[36]  Albert J. Shih,et al.  A micro-scale model for predicting contact resistance between bipolar plate and gas diffusion layer in PEM fuel cells , 2007 .

[37]  Dai Gil Lee,et al.  Composite endplates with pre-curvature for PEMFC (polymer electrolyte membrane fuel cell) , 2010 .

[38]  Gregory B. McKenna,et al.  Rubber modeling using uniaxial test data , 2001 .

[39]  Larry Frisch.  PEM fuel cell stack sealing using silicone elastomers , 2001 .

[40]  Miao Qian,et al.  Effects of structural parameters on the performance of a micro-reactor with micro-pin-fin arrays (MPFAR) for hydrogen production , 2012 .

[41]  Dino Isa,et al.  Modeling of commercial proton exchange membrane fuel cell using support vector machine , 2016 .

[42]  Ahmet Kusoglu,et al.  A Mechanistic Model for Pinhole Growth in Fuel-Cell Membranes during Cyclic Loads , 2014 .

[43]  Mohammed Diany,et al.  Numerical simulation of radial and axial compressed elastomeric O-ring relaxation , 2012 .

[44]  Hyung-Kyu Kim,et al.  Evaluation of O-ring stresses subjected to vertical and one side lateral pressure by theoretical approximation comparing with photoelastic experimental results , 2009 .

[45]  Agus P. Sasmito,et al.  Effect of operating parameters on the transient performance of a polymer electrolyte membrane fuel cell stack with a dead-end anode , 2014 .

[46]  Dai Gil Lee,et al.  Composite sandwich endplates with a compliant pressure distributor for a PEM fuel cell , 2015 .

[47]  Cristian Kunusch,et al.  Description of gasket failure in a 7 cell PEMFC stack , 2007 .

[48]  Y. J. Chao,et al.  Stress relaxation behavior of EPDM seals in polymer electrolyte membrane fuel cell environment , 2012 .