Experimental and numerical investigation of a micro-CHP flameless unit

A numerical and experimental investigation of a system for the micro-cogeneration of heat and power, based on a Stirling cycle and equipped with a flameless burner, is carried out with the purpose of evaluating the system performances with hydrogen-enriched fuels. The numerical model of the combustion chamber gave significant insight concerning the analysis and interpretation of the experimental measurements; however it required considerable efforts, especially regarding the definition of proper boundary conditions. In particular a subroutine was developed in order to couple the oxidation process to the overall operation of the micro-cogeneration unit. This procedure was proved to perform satisfactory, providing values of the heat source for the Stirling cycle that lead to expected thermal efficiencies in agreement with those indicated in the literature for similar systems. The importance of a proper turbulence-chemistry interaction treatment and rather detailed kinetic schemes to capture flameless combustion was also assessed. A simple NO formation mechanism based on the thermal and prompt routes was found to provide NO emissions in relatively good agreement with experimental observations when applied on thermo-fluid dynamic fields obtained from detailed oxidation schemes.

[1]  J. De Ruyck,et al.  NO formation rates for hydrogen combustion in stirred reactors , 2001 .

[2]  A. Gupta,et al.  Thermal Characteristics of Gaseous Fuel Flames Using High Temperature Air , 2004 .

[3]  Leonardo Tognotti,et al.  A simplified approach for predicting NO formation in MILD combustion of CH4-H2 mixtures , 2011 .

[4]  Matthew F. Barone,et al.  Measures of agreement between computation and experiment: Validation metrics , 2004, J. Comput. Phys..

[5]  Bjørn F. Magnussen,et al.  A Numerical Study of a Bluff-Body Stabilized Diffusion Flame. Part 2. Influence of Combustion Modeling And Finite-Rate Chemistry , 1996 .

[6]  V. Ismet Ugursal,et al.  Modeling of internal combustion engine based cogeneration systems for residential applications , 2007 .

[7]  B. Hjertager,et al.  On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion , 1977 .

[8]  Bernd Thomas,et al.  Benchmark testing of Micro-CHP units , 2008 .

[9]  Roger W. Logan,et al.  Comparing 10 Methods for Solution Verification, and Linking to Model Validation , 2005, J. Aerosp. Comput. Inf. Commun..

[10]  W. P. Jones,et al.  Global reaction schemes for hydrocarbon combustion , 1988 .

[11]  D. Pratt,et al.  Measurement of atomic oxygen and nitrogen oxides in jet-stirred combustion , 1975 .

[12]  Bassam B. Dally,et al.  Simultaneous imaging of OH, formaldehyde, and temperature of turbulent nonpremixed jet flames in a heated and diluted coflow , 2007 .

[13]  A. Hayhurst,et al.  Evidence for a New Way of Producing NO via NNH in Fuel-Rich Flames at Atmospheric Pressure , 1998 .

[14]  T. F. Smith,et al.  Evaluation of Coefficients for the Weighted Sum of Gray Gases Model , 1982 .

[15]  J. Wunning,et al.  Flameless oxidation to reduce thermal no-formation , 1997 .

[16]  Bassam B. Dally,et al.  Imaging of diluted turbulent ethylene flames stabilized on a Jet in Hot Coflow (JHC) burner , 2008 .

[17]  P. Williams,et al.  Evaluation of NOx Flue Gas Analyzers for Accuracy and Their Applicability for Low-Concentration Measurements , 2003, Journal of the Air & Waste Management Association.

[18]  Patrick J. Roache,et al.  Verification and Validation in Computational Science and Engineering , 1998 .

[19]  Laurent Georges Mounaud.  A Parametric Study of the Effect of Fire Source Elevation in a Compartment , 2004 .

[20]  Bassam B. Dally,et al.  Modeling turbulent reacting jets issuing into a hot and diluted coflow , 2005 .

[21]  C. Wilke.  A Viscosity Equation for Gas Mixtures , 1950 .

[22]  P. Sabia,et al.  Hydrogen-enriched methane Mild Combustion in a well stirred reactor , 2007 .

[23]  A. Parente,et al.  Effect of the combustion model and kinetic mechanism on the MILD combustion in an industrial burner fed with hydrogen enriched fuels , 2008 .

[24]  Marco Derudi,et al.  Mild Combustion of Industrial Hydrogen-Containing Byproducts , 2007 .

[25]  G. Soete.  Overall reaction rates of NO and N2 formation from fuel nitrogen , 1975 .

[26]  V. I. Ugursal,et al.  Residential cogeneration systems: Review of the current technology , 2006 .

[27]  A. Gupta,et al.  High Temperature Air Combustion: From Energy Conservation to Pollution Reduction , 2002 .

[28]  James A. Miller,et al.  The Chemkin Thermodynamic Data Base , 1990 .

[29]  A. Dean,et al.  O + NNH: A possible new route for NOX formation in flames , 1995 .

[30]  Martin Pehnt,et al.  Environmental impacts of distributed energy systems—The case of micro cogeneration , 2008 .

[31]  A. Parente,et al.  Numerical and experimental analysis of NO emissions from a lab-scale burner fed with hydrogen-enriched fuels and operating in MILD combustion , 2009 .

[32]  Robert J. Kee,et al.  On reduced mechanisms for methaneair combustion in nonpremixed flames , 1990 .

[33]  Martin R. Wolf,et al.  K3 User Guide , 2000 .

[34]  Masashi Katsuki,et al.  The science and technology of combustion in highly preheated air , 1998 .

[35]  Iskander Tlili,et al.  PERFORMANCE OPTIMIZATION OF STIRLING ENGINES , 2008 .

[36]  R. Weber,et al.  On the (MILD) combustion of gaseous, liquid, and solid fuels in high temperature preheated air , 2005 .