An experimental study of the dual-fuel performance of a small compression ignition diesel engine operating with three gaseous fuels

Abstract A dual-fuel engine is a compression ignition (CI) engine where the primary gaseous fuel source is premixed with air as it enters the combustion chamber. This homogenous mixture is ignited by a small quantity of diesel, the ‘pilot’, that is injected towards the end of the compression stroke. In the present study, a direct-injection CI engine, was fuelled with three different gaseous fuels: methane, propane, and butane. The engine performance at various gaseous concentrations was recorded at 1500 r/min and quarter, half, and three-quarters relative to full a load of 18.7 kW. In order to investigate the combustion performance, a novel three-zone heat release rate analysis was applied to the data. The resulting heat release rate data are used to aid understanding of the performance characteristics of the engine in dual-fuel mode. Data are presented for the heat release rates, effects of engine load and speed, brake specific energy consumption of the engine, and combustion phasing of the three different primary gaseous fuels. Methane permitted the maximum energy substitution, relative to diesel, and yielded the most significant reductions in CO2. However, propane also had significant reductions in CO2 but had an increased diffusional combustion stage which may lend itself to the modern high-speed direct-injection engine.

[1]  Robert E. Hayes,et al.  Experimental and Modelling Study of Variable Cycle Time for a Reversing Flow Catalytic Converter for Natural Gas/Diesel Dual Fuel Engines , 2000 .

[2]  Michael F. J. Brunt,et al.  Calculation of Heat Release in Direct Injection Diesel Engines , 1999 .

[3]  Wanhua Su,et al.  A Study On the Determination of the Amount of Pilot Injection and Rich and Lean Boundaries of the Pre-Mixed CNG/Air Mixture for a CNG/Diesel Dual-Fuel Engine , 2003 .

[4]  G. Karim,et al.  Exhaust Emissions from Dual Fuel Engines at Light Load , 1993 .

[5]  Imperial College of Science and Technology , 1958, Nature.

[6]  G. A. Karim,et al.  An Examination of the Ignition Delay Period in Dual Fuel Engines , 1989 .

[7]  Muhammad Osman Khan.  Dual-fuel combustion phenomena , 1970 .

[8]  K. C. Midkiff,et al.  Performance and heat release analysis of a pilot-ignited natural gas engine , 2002 .

[9]  William H. Press,et al.  Numerical recipes in Fortran 77 : the art of scientificcomputing. , 1992 .

[10]  G. A. Karim,et al.  THE DUAL FUEL ENGINE OF THE COMPRESSION IGNITION TYPE--PROSPECTS, PROBLEMS AND SOLUTIONS--A REVIEW , 1983 .

[11]  G. Karim,et al.  The Ignition Delay Period in Dual Fuel Engines , 1995 .

[12]  R. L. Barkhimer,et al.  Strategies to Improve Combustion and Emission Characteristics of Dual-Fuel Pilot Ignited Natural Gas Engines , 1997 .

[13]  Pandit Patil.  ALTERNATIVE FUELS IN FUTURE VEHICLES. , 1996 .

[15]  Ghazi A. Karim,et al.  Simulation of combustion processes in gas-fuelled diesel engines , 1997 .

[16]  Alan K. Long,et al.  A computer program: As a specific example of the broadening use of computers in chemistry covered in the previous News Focus by C&EN's Joe Haggin, three chemists discuss in detail one system for computer- assisted organic synthesis. , 1983 .

[17]  A Three-Zone Heat Release Model for DI Diesel Engines , 1994 .

[18]  S. H. Turner,et al.  Dual-fuel natural gas/diesel engines: Technology, performance, and emissions. Topical report, February 1993-November 1994 , 1994 .